1. はじめに
The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.
図1: 前面 view of the Turtle Beach Stealth 350VR Headset.
2. セットアップ
2.1 マイクの接続
To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.
Figure 2: Close-up of the left ear cup showing the microphone jack.
2.2 電源のオン/オフ
Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.
2.3 ヘッドセットの充電
The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.
2.4 Connecting to a VR Device (e.g., PlayStation VR)
Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.
For PlayStation 4 setup: Go to 設定 > デバイス > オーディオデバイス。 セットする 入出力デバイス to the headset connected to the controller. Set ヘッドフォンへの出力 に すべてのオーディオ。 セットする 音量コントロール（ヘッドフォン） to maximum. Select マイクレベルの調整 and follow on-screen instructions to calibrate.
ビデオ1: 詳細な設定と機能の説明view for the Turtle Beach Stealth 350VR headset, including connection to VR devices.
3. ヘッドセットの操作
All primary audio controls are conveniently located on the left ear cup of the headset.
3.1 Mic Mute
To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.
3.2 マスターボリューム
Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.
3.3 Variable Bass Boost
Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.
ビデオ2：クイックオーバーview of the Turtle Beach Stealth 350VR headset features and controls.
4. メンテナンス
To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:
- クリーニング： Use a soft, dry cloth to wipe down the ear cups and headband. Avoid using harsh chemicals or abrasive materials.
- ストレージ： ヘッドセットは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- ケーブルのお手入れ: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
- マイクロフォン： When not in use, the detachable microphone can be removed and stored separately to prevent damage.
5。 トラブルシューティング
If you encounter issues with your Stealth 350VR headset, consider the following common solutions:
- 音声なし/音量が低い:
- ヘッドセットの電源がオンになっており、完全に充電されていることを確認します。
- すべてのケーブル接続をチェックして、しっかりと接続されていることを確認します。
- Verify that the master volume dial on the headset is turned up.
- Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
- マイクが機能しない:
- Ensure the microphone is firmly inserted into its jack.
- Check that the mic mute switch on the headset is in the unmute position.
- Verify microphone input settings on your VR device or console.
- 歪んだオーディオ:
- Lower the master volume on the headset or your connected device.
- Adjust the Variable Bass Boost to see if it resolves the distortion.
- 他のオーディオデバイスが干渉していないことを確認します。
6. 仕様
| 特徴 | 詳細 |
|---|---|
| スピーカー | 50mm Speakers with Neodymium Magnets |
| 周波数応答 | 20Hz – 20kHz |
| Ear-cup Design | Over-Ear (Closed) |
| Microphone Design | Unidirectional Noise-Cancelling Gaming Microphone |
| ヘッドフォンジャック | 3.5ミリジャック |
| 接続技術 | 有線 |
| コントロールタイプ | Volume Control, Mic Mute, Bass Boost |
| ケーブル機能 | Detachable Audio Cables |
| アイテム重量 | 1.1ポンド（約0.5kg） |
| バッテリー寿命 | 最大30時間 |
| 対応デバイス | PlayStation VR, PlayStation 4, Oculus Rift, HTC Vive, Gear VR, PC, Xbox (via controller) |
7. 保証とサポート
保証情報、テクニカルサポート、その他のリソースについては、Turtle Beachの公式ウェブサイトをご覧ください。 web購入サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求のために購入証明書を保管してください。
オンラインサポート： www.turtlebeach.com/support
