Midiplus Studio 2 USB Audio Interface

導入

The Midiplus Studio 2 is a compact and powerful two input/output audio interface designed for high-quality audio recording and playback. It features high-precision 24-bit/192kHz sampling, ensuring pristine audio fidelity. This device is powered via USB, offers 48V phantom power for condenser microphones, and utilizes a USB 2.0 interface for fast data transmission. Its robust design and intuitive controls make it suitable for both Mac and Windows operating systems.

設定

Follow these steps to set up your Midiplus Studio 2 audio interface:

1. デバイスを開梱します。 Carefully remove the Studio 2 interface and its accessories from the packaging. Ensure all components, including the USB cable and owner's manual, are present.
2. コンピュータに接続します: Connect the Studio 2 to your computer using the supplied USB cable. The device is USB 2.0 compatible and will draw power directly from the USB port.
3. ドライバーのインストール: For optimal performance, it is recommended to install the latest drivers for the Midiplus Studio 2. Visit the official Midiplus website to download the appropriate drivers for your operating system (Windows or Mac). Follow the on-screen instructions for installation.
4. オーディオデバイスを接続します: Connect your microphones, instruments, or other audio sources to the input jacks on the front panel. Connect your studio monitors or headphones to the output jacks on the rear or front panel, respectively.

フロント view of the Midiplus Studio 2 USB Audio Interface, showing input jacks, gain knobs, and monitoring controls.

後方 view of the Midiplus Studio 2 USB Audio Interface, displaying the USB port and monitor output jacks.

オペレーティング

The Midiplus Studio 2 offers intuitive controls for managing your audio inputs and outputs:

• Input (MIC/Line/Hi-Z) Interfaces: The front panel features two combo input jacks that accept XLR for microphones or 1/4-inch TRS/TS for line-level or high-impedance instruments.
• Input Gain Control Knobs: Adjust the input level for each channel using the dedicated gain knobs. Monitor the input signal level using the LED indicators.
• Switch (Mic/Instrument) Button: Press this button to toggle between microphone (XLR) and instrument (Hi-Z) input modes for the respective channel.
• 48V Phantom Power Supply: Activate the 48V phantom power button to provide power to condenser microphones connected to the XLR inputs. Ensure phantom power is only used when required by your microphone.
• Output Volume Control Knob: This large central knob controls the overall output volume to your main monitor outputs.
• Monitor Input/Output Switch Knob: Adjust the blend between direct input monitoring and playback from your computer.
• Headphone Gain Control Knob: Control the volume level for the headphone output.
• Stereo Sound Monitor Switch Button: Toggle between stereo and mono monitoring for the headphone and main outputs.
• ヘッドフォンインターフェース: Connect your headphones to the 1/4-inch stereo jack on the front panel.
• Output Interfaces (Left & Right Channel): Balanced 1/4-inch TRS outputs on the rear panel connect to your studio monitors.

詳細 view of the Midiplus Studio 2 front panel, highlighting the input gain controls, phantom power button, and monitoring section.

メンテナンス

Proper maintenance ensures the longevity and optimal performance of your Midiplus Studio 2:

• クリーニング： Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or waxes, as they may damage the finish or internal components.
• ストレージ： When not in use for extended periods, store the interface in a cool, dry place, away from direct sunlight and extreme temperatures.
• 取り扱い： Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal circuitry or external components.
• 換気： 過熱を防ぐため、本体周囲の換気を十分に行ってください。通気口を塞がないでください。

トラブルシューティング

If you encounter issues with your Midiplus Studio 2, refer to the following common troubleshooting tips:

• オーディオ出力なし:
  • Ensure the Studio 2 is selected as the default audio input/output device in your computer's sound settings.
  • Check all cable connections (USB, monitors, headphones) for secure fit.
  • Verify that the output volume knob on the Studio 2 is turned up.
  • Confirm that the software you are using (DAW, media player) is configured to use the Studio 2 as its audio device.
• 入力信号なし:
  • Check the input gain knobs for the respective channels and ensure they are turned up.
  • Verify that your microphone or instrument is properly connected and functioning.
  • コンデンサー マイクを使用する場合は、48V ファンタム電源が有効になっていることを確認してください。
  • Confirm the correct input type (Mic/Line/Inst) is selected via the switch button.
• Excessive Noise/Hiss:
  • すべてのケーブルがシールドされ、良好な状態であることを確認します。
  • Check for ground loops by trying different power outlets or using a ground loop isolator if necessary.
  • Reduce input gain if the signal is clipping (indicated by the CLIP LED).
  • Ensure the device is not placed near sources of electromagnetic interference.
• コンピュータでデバイスが認識されない:
  • USB ケーブルをコンピュータの別の USB ポートに接続してみてください。
  • コンピュータを再起動します。
  • Reinstall the latest drivers from the Midiplus webサイト。

仕様

保証とサポート

For detailed warranty information and technical support, please refer to the official Midiplus webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまで直接お問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

ミディプラス公式 Webサイト： www.midiplus.com