Keyless2Go Replacement Remote Flip Key Fob

導入

This manual provides detailed instructions for the Keyless2Go Replacement 4-Button Remote Flip Key Fob. It covers product compatibility, programming procedures, operational guidelines, and maintenance tips to ensure proper functionality and longevity of your key fob. This product is designed to function as a direct replacement for specific Mazda vehicle models.

製品終了view

フロント view of the Keyless2Go 4-button remote flip key fob, showing the lock, unlock, trunk, and panic buttons, with the key blade extended.

戻る view of the Keyless2Go 4-button remote flip key fob, displaying the smooth black casing and a small screw for assembly.

The Keyless2Go replacement remote flip key fob is a complete unit including the transponder chip and battery. It features four buttons for remote functions: Lock, Unlock, Trunk Release (car icon with HOLD), and Panic Alarm (exclamation mark with HOLD). The integrated key blade can be cut to match your vehicle's ignition.

互換性

This replacement key fob is compatible with specific Mazda vehicles WITHOUT SMART ENTRY SYSTEM (push-button ignition). Please verify your vehicle's compatibility and original key fob's FCC ID before proceeding.

対応車種：

• 2010-2013 Mazda 3 (WITHOUT SMART ENTRY SYSTEM)
• 2009-2013 Mazda 6 (WITHOUT SMART ENTRY SYSTEM)
• 2006-2015 Mazda MX-5 Miata (WITHOUT SMART ENTRY SYSTEM)

FCC ID Verification:

It is crucial that your original remote has the FCC ID: BGBX1T478SKE125-01. If the FCC ID does not match, this flip key will not work with your vehicle. The FCC ID is typically located on the top portion of the remote after removing the flip key blade.

Illustration demonstrating the process of locating the FCC ID number on the key fob. The key blade must be removed to reveal the FCC ID on the remote's top surface.

If you do not have your original flip key to verify this information, contact your local dealership with your Vehicle Identification Number (VIN) and request the correct part number.

セットアップとプログラミング

This replacement remote flip key requires both key blade cutting and electronic programming to function with your vehicle.

キーブレードの切断:

The uncut key blade must be cut by a qualified locksmith or dealership to match your vehicle's ignition and door locks. This process cannot be performed at home.

リモートプログラミング：

Programming instructions will be provided with your order. There are two primary methods for programming:

1. DIY Programming (Remote Portion): This method requires at least one working key that starts the vehicle to self-program the remote functions (lock, unlock, trunk, panic).
2. DIY Programming (Key Portion/Immobilizer): To self-program the transponder chip (which allows the car to start), two working original keys are typically required.
3. プロフェッショナルプログラミング: If you do not have the required number of working original keys for DIY programming, or if you encounter difficulties, the key fob will need to be programmed by an automotive locksmith or a dealership.

重要な注意: This key fob is NOT ABLE TO BE CLONED. Attempting to clone may result in malfunction.

操作手順

Once properly cut and programmed, your Keyless2Go remote flip key fob will operate your vehicle's keyless entry system and ignition.

• ロックボタン: 一度押すとすべての車両のドアがロックされます。
• ロック解除ボタン: 1 回押すと運転席ドアのロックが解除され、2 回押すとすべてのドアのロックが解除されます。
• Trunk Release Button (Car icon with HOLD): 押し続けると車両のトランクまたはリフトゲートが開きます。
• Panic Alarm Button (Exclamation mark with HOLD): Press and hold to activate the vehicle's panic alarm. Press again to deactivate.
• キーブレード: Insert into the ignition to start the vehicle or into the door lock cylinder for manual entry.

メンテナンス

The Keyless2Go remote flip key fob comes with a pre-installed Lithium Metal battery. While designed for durability, proper care will extend its lifespan.

• Avoid exposing the key fob to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• キーフォブを落としたり、強い衝撃を与えたりしないでください。
• 外側は柔らかく乾いた布で拭いてください。刺激の強い化学薬品や研磨剤の使用は避けてください。
• If the remote range decreases significantly, the battery may be weakening. Consult a professional for battery replacement if necessary, as improper handling can damage the internal components.

トラブルシューティング

If you experience issues with your Keyless2Go remote flip key fob, consider the following common problems and solutions:

• Key Fob Does Not Work After Programming:
  • Verify that your vehicle does not have a Smart Entry System (push-button ignition), as this key fob is not compatible with such systems.
  • Double-check that the FCC ID on your original remote matches BGBX1T478SKE125-01. An incorrect FCC ID will prevent functionality.
  • Ensure all programming steps were followed precisely. If DIY programming failed, professional programming by a locksmith or dealership may be required.
  • Confirm that the transponder chip is correctly programmed to allow the vehicle to start.
• リモート範囲の縮小: This may indicate a low battery. While the battery is included, its lifespan can vary.
• Key Fob Buttons Unresponsive: Ensure the key fob has not been exposed to water or physical damage.

For further assistance, Keyless2Go offers free technical support with every order. Please refer to the contact information provided with your purchase.

仕様

保証とサポート

Keyless2Go provides free technical support with every order to assist with any questions or issues you may encounter during the setup or use of your replacement key fob.

法的免責事項:

All product names, brands, logos, and other trademarks mentioned within this manual are the property of their respective owners. These are used solely to simplify the identification of the proper parts for a particular vehicle. Keyless2Go is not affiliated with, endorsed by, or sponsored by any of the companies or trademarks referenced herein.