導入
Thank you for choosing the Hisense WD3S1043BT6 2-in-1 Front Load Washing & Drying Machine. This appliance combines washing and drying functions into a single unit, offering convenience and efficiency. It features an Inverter motor for quiet operation and energy efficiency, Auto Dose technology for precise detergent dispensing, and Wi-Fi connectivity for smart control. Please read this manual carefully before using your new appliance to ensure safe and optimal performance.
1. セットアップとインストール
1.1 開梱と輸送用ボルトの取り外し
Before operating the machine, remove all transit bolts located at the rear of the appliance. These bolts secure the drum during transportation and must be removed to prevent damage during operation. Keep the bolts for future transport if needed.
1.2 機器の水平調整
Place the machine on a firm, level surface. Adjust the leveling feet at the bottom of the appliance until it is stable and does not rock. Proper leveling reduces vibration and noise during operation.
1.3 水接続
Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Ensure all connections are tight to prevent leaks. Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fastened and not kinked.
1.4 電気接続
電源コードをアース付きコンセントに差し込みます。電圧がtage と周波数は、機器の定格ラベルに記載されている仕様と一致します。
図1: 前面 view of the Hisense WD3S1043BT6 appliance, showing the control panel, detergent drawer, and front-loading door.
2. 操作手順
2.1 洗濯物の投入
Open the door and load laundry into the drum. Do not overload the machine; ensure there is enough space for clothes to tumble freely. For optimal washing and drying, adhere to the maximum load capacities (10.5 kg for washing, 7 kg for drying).
Figure 2: The appliance with its front door open, showing the drum ready for laundry loading.
2.2 Detergent and Softener Dispensing (Auto Dose)
The machine features an Auto Dose system. Fill the detergent and softener compartments in the dispenser drawer. The machine will automatically dispense the correct amount based on the load size and selected program. This system can store enough detergent for approximately one month of use.
Figure 3: The detergent dispenser drawer, highlighting the compartments for detergent and softener.
2.3 プログラムの選択
プログラムセレクターダイヤルを回して、ご希望の洗濯または洗濯＆乾燥プログラムを選択してください。選択可能なプログラムは以下のとおりです。
- コットン： 丈夫な綿製品に。
- 合成： 合成繊維または混紡生地用。
- ウール： For delicate woolens.
- クイックウォッシュ： 軽い汚れで高速サイクルが必要なアイテムに適しています。
- アレルギーケア： 衛生性を高めるために。
- 更新: For refreshing clothes without full washing.
- 乾燥プログラム: Various options for different fabric types and dryness levels.
2.4 サイクルの開始
After selecting the program and any desired options (temperature, spin speed, drying level), press the Start/Pause button to begin the cycle.
2.5 Wi-Fi接続
This appliance can be controlled via Wi-Fi using the Hisense ConnectLife app. Download the app, register your device, and follow the in-app instructions for remote control and monitoring.
3. メンテナンスとケア
3.1 洗剤引き出しのクリーニング
Regularly remove and clean the detergent drawer to prevent residue buildup. Rinse it under running water and use a brush to remove any stubborn deposits.
3.2 ドラムのクリーニング
Run a drum clean cycle periodically (if available) or a hot wash with no laundry and a descaling agent to remove detergent residue and prevent odors. The drum is made of stainless steel for durability.
Figure 4: The interior of the stainless steel drum, designed for effective washing and drying.
3.3 ポンプフィルターの清掃
Locate the pump filter at the bottom front of the machine. Open the cover, drain any residual water, and carefully unscrew the filter. Remove any lint, coins, or foreign objects, then clean and reinsert the filter securely.
3.4 外装清掃
外側の表面を柔らかい布で拭きます。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
4. トラブルシューティングガイド
If you encounter issues with your appliance, refer to the following common problems and solutions before contacting customer service.
- マシンが起動しない: Ensure the power cord is plugged in, the door is closed properly, and the Start/Pause button has been pressed. Check if the water supply is turned on.
- 水を入れない: Check if the water tap is open and the inlet hose is not kinked. Ensure the water pressure is adequate.
- 水漏れ： Verify that the inlet and drain hoses are securely connected and not damaged. Check the pump filter for proper sealing.
- 過度の振動/騒音: Ensure the machine is level and all transit bolts have been removed. Distribute laundry evenly inside the drum.
- 洗濯/乾燥結果が悪い: Do not overload the machine. Use the correct amount of detergent for the load and water hardness. Select the appropriate program for the fabric type.
- エラーコード： If an error code appears on the display, consult the full user manual for specific meanings and troubleshooting steps. Often, turning the machine off and on again can reset minor errors.
5. 技術仕様
| モデル | WD3S1043BT6 |
| タイプ | フロントロード洗濯乾燥機 |
| 洗浄能力 | 10.5キロ |
| 乾燥容量 | 7キロ |
| 寸法（幅×奥行き×高さ） | 60 x 61 x 85 cm |
| アイテム重量 | 75キロ |
| ワットtage | 1800ワット |
| ドラム素材 | ステンレス鋼 |
| 特集 | Auto Dose, High Efficiency, Inverter, Load Sensor, Wi-Fi |
| エネルギー効率クラス | Aクラス |
| 色 | グレー |
6. 保証情報
This Hisense appliance comes with a 2年間保証 from the date of purchase. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. The warranty covers manufacturing defects and malfunctions under normal household use. It does not cover damage caused by improper installation, misuse, neglect, unauthorized repairs, or normal wear and tear. For full terms and conditions, please refer to the warranty card included with your product or visit the official Hisense webサイト。
7. カスタマーサポート
If you require further assistance, have questions not covered in this manual, or need to report a service issue, please contact Hisense customer support. You can find contact details (phone numbers, email, or online support portal) on the official Hisense website or in the documentation provided with your appliance. When contacting support, please have your model number (WD3S1043BT6) and serial number ready.
