Weiser GED1460X15 Keypad Lock User Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser GED1460X15 Keypad Lock. This electronic deadbolt offers keyless entry and enhanced security features, including SmartKey Re-Key Technology. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your lock.

安全情報

• Read all instructions completely before installing and operating the lock.
• すべての警告および注意事項をよく理解してください。
• ユーザーコードとマスターコードを保護します。
• 使用済みの電池は、現地の法律および規制に従って処分してください。
• 指示された範囲を超えてロックを分解または改造しないでください。保証が無効になり、セキュリティが損なわれる可能性があります。

パッケージ内容

• 外部キーパッドアセンブリ
• Interior Assembly (with battery cover)
• デッドボルトラッチ
• ストライクプレート
• 取り付けプレート
• 取り付けネジ
• Keys (for SmartKey cylinder)
• インストールガイドとユーザーマニュアル

セットアップとインストール

1. ドアの準備

Ensure your door is properly prepared for installation. The lock is designed for standard door thicknesses and backsets. Refer to the dimensions diagram for specific measurements.

Figure 1: Product dimensions, showing length, width, and height measurements for proper door fitting.

2. デッドボルトラッチを取り付ける

Insert the deadbolt latch into the edge of the door. Ensure the 'UP' arrow on the latch is pointing upwards. Secure it with the provided screws.

Figure 2: The deadbolt latch mechanism, shown with accompanying SmartKey keys.

3. 外装キーパッドアセンブリの取り付け

Feed the cable from the exterior keypad through the hole in the door and position the keypad flush against the door. Ensure the tailpiece passes through the center hole of the deadbolt latch.

図3: 前面 view of the Weiser keypad lock, displaying the numerical buttons and keyhole.

4. 内装アセンブリを取り付ける

Connect the cable from the exterior assembly to the interior assembly. Mount the interior assembly onto the door, aligning the tailpiece with the turnpiece slot. Secure with screws through the mounting plate.

図4：側面 view of the interior unit of the lock, showing the battery compartment and manual turnpiece.

5.バッテリーを取り付けます

The lock requires 4 AA batteries (not included). Remove the battery cover on the interior assembly and insert the batteries, observing polarity. Replace the battery cover.

6. Perform Door Handing Process

After battery installation, the lock will automatically perform a door handing process to learn the orientation of your door. This is crucial for proper operation. If the lock does not automatically hand, refer to the full installation guide for manual initiation.

ロックの操作

ユーザーコードのプログラミング

Your lock can store up to 6 unique user codes. Refer to the full programming instructions for detailed steps on adding, deleting, and modifying codes. A master code is recommended for enhanced security and managing user codes.

図 5: 拡大図 view of the keypad, highlighting the numbered buttons and the lock symbol.

ドアをロックする

• キーパッドのロック: Press the lock symbol button on the keypad. The deadbolt will extend.
• オートロック： 有効にすると、ロックが解除されてから一定時間（例：30 秒）後に自動的に再ロックされます。
• 手動ロック（室内）: Turn the thumb-turn on the interior assembly to extend the deadbolt.

ドアのロックを解除する

• Keypad Unlocking: Enter a valid user code on the keypad, then press the lock symbol button. The deadbolt will retract.
• キーロック解除: 物理キーを鍵穴に挿入し、回してデッドボルトのロックを解除します。
• Manual Unlocking (Interior): Turn the thumb-turn on the interior assembly to retract the deadbolt.

SmartKey Re-Key Technology

The SmartKey cylinder allows you to re-key your lock to work with any other SmartKey compatible key. Follow the specific instructions provided with your SmartKey tool for this process. This feature is useful for matching existing keys or changing keys without replacing the entire lock.

Figure 6: Visual representation of key features including one-touch locking, master code, user codes, bump-proof, pick-proof, and kick-in resistant design.

メンテナンス

バッテリー交換

When the batteries are low, the lock will emit an audible alert and/or the keypad will flash red after a successful code entry. Replace all four AA batteries promptly to ensure continuous operation. Use only new, high-quality alkaline batteries. To replace, remove the interior battery cover, remove old batteries, insert new ones observing polarity, and replace the cover.

クリーニング

ロックを柔らかくて清潔な布で拭いてくださいamp 布で拭いてください。研磨剤入りの洗剤や溶剤は、仕上げや電子部品を傷める可能性があるため、使用しないでください。

トラブルシューティング

• ロックが応答しない: Check battery levels. Replace batteries if necessary. Ensure the cable connection between interior and exterior assemblies is secure.
• キーパッドが点灯しない: This typically indicates dead batteries. Replace all 4 AA batteries.
• デッドボルトが完全に伸縮しない: Ensure the door frame strike plate is properly aligned. Check for any obstructions in the door jamb. Re-run the door handing process.
• 機能しないコード: Verify that the correct user code is being entered. If a master code is set, ensure it is used for programming. Try resetting the lock to factory defaults and reprogramming codes (refer to the full programming guide).
• Lock beeps continuously: This may indicate a low battery warning or an error. Check batteries first. If the issue persists, consult the full manual for error code interpretations.

仕様

保証とサポート

For warranty information and technical support, please refer to the official Weiser website or contact their customer service. Keep your proof of purchase for warranty claims. Detailed contact information can typically be found on the product packaging or the manufacturer's webサイト。