1.製品オーバーview
The XPOWER P-800 Pro is a powerful 3/4 HP centrifugal air mover designed for efficient drying in various applications. This unit is ideal for drying large to very large areas in commercial and residential settings, including water damage restoration, janitorial tasks, plumbing, and general home use. Its robust design and versatile features make it a valuable tool for accelerating drying processes and improving air circulation.
Figure 1: XPOWER P-800 Pro Centrifugal Air Mover. This image shows the side profile of the blue air mover, highlighting its compact and durable housing.
主な特徴:
- Faster Surface Drying: Produces a powerful, focused air current optimal for drying flat surfaces and tight areas like carpets, floors, furniture, windows, and walls.
- Powerful & Energy-Efficient: Equipped with a 3/4 HP induction motor, delivering up to 3200 CFM airflow while drawing only 7.5 Amps at its highest setting.
- 軽量＆ポータブル： Measures 17.5" x 15.9" x 18.5" and weighs 23 pounds, featuring a handle for convenient storage and transportation. Made with durable PP housing.
- 多彩な機能: Offers 3 speeds and 4 operating positions (0°, 20°, 45°, 90°) for targeted airflow. Suitable for air drying, ventilation, and increasing room air circulation.
- 安全基準: ETL / CETL safety certified with dual thermal protection.
2. セットアップとインストール
Before operating the XPOWER P-800 Pro, ensure it is placed on a stable, level surface. Inspect the unit for any visible damage to the housing or power cord. Always connect the unit to a grounded electrical outlet.
配置:
The P-800 Pro can be positioned in four different angles to direct airflow precisely where needed:
- 0°位置: Flat on the ground, directing air horizontally across floors or carpets.
- 20°位置: Slightly angled upwards, suitable for drying walls or furniture.
- 45°位置: More steeply angled, effective for drying higher sections of walls or ceilings.
- 90°位置: Upright, directing air vertically for ceiling drying or general room ventilation.
Figure 2: The XPOWER P-800 Pro can be adjusted to 0°, 20°, 45°, and 90° operating positions to optimize airflow for various drying needs.
電源接続:
Unwrap the 25 ft. power cord from the integrated cord wrap. Plug the unit into a standard 115 Volt AC grounded electrical outlet. Ensure the outlet meets the unit's power requirements (7.5 Amps maximum draw).
Figure 3: The control panel with speed selector and the integrated cord wrap for convenient storage.
3. 操作手順
The XPOWER P-800 Pro features a simple control panel for selecting speed and setting the timer.
速度の選択:
Locate the speed selector knob on the control panel. Turn the knob to choose one of the three available speed settings:
- スピード1： Low airflow for gentle drying or continuous air circulation.
- スピード2： Medium airflow for general drying tasks.
- スピード3： High airflow for maximum drying power, ideal for water damage restoration.
タイマー機能:
The unit may include a timer function (check your specific model). If present, the timer allows you to set the operating duration. Turn the timer knob to the desired duration (e.g., 60, 120, 180 minutes, or continuous 'ON'). The unit will automatically shut off once the set time has elapsed.
4. メンテナンス
Regular maintenance ensures optimal performance and extends the lifespan of your XPOWER P-800 Pro air mover. Always unplug the unit from the power source before performing any maintenance.
クリーニング：
- 外観： 広告で外部ハウジングを拭きますamp 布。 刺激の強い化学薬品や研磨剤の入ったクリーナーの使用は避けてください。
- 吸気/排気グリル: Periodically clean the air intake and outlet grilles to remove dust, debris, and pet hair. A vacuum cleaner with a brush attachment can be used.
- 内部コンポーネント: Do not attempt to clean internal components unless you are a qualified technician.
ストレージ：
When not in use, store the air mover in a cool, dry place. Utilize the integrated cord wrap to neatly store the power cord. The unit is stackable for efficient storage.
5。 トラブルシューティング
If you encounter issues with your XPOWER P-800 Pro, refer to the following common troubleshooting steps:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ユニットの電源が入らない。 | 電源がありません。 | 電源コードがコンセントにしっかりと差し込まれているか確認してください。ブレーカーが落ちていないことを確認してください。 |
| 空気の流れが少ない、または全くない。 | 空気の吸気口/排気口が塞がれています。 | Inspect and clean the air intake and outlet grilles for obstructions. |
| 異常な騒音や振動。 | 緩んだ部品または異物。 | Unplug the unit and carefully inspect for any loose parts or objects. If the issue persists, contact customer support. |
| ユニットが過熱して停止します。 | Blocked airflow or motor overload. | Ensure adequate ventilation around the unit. Clean grilles. Allow the unit to cool down before restarting. If the problem continues, contact customer support. |
If these steps do not resolve the issue, please contact XPOWER customer support for further assistance.
6. 仕様
| 仕様 | 価値 |
|---|---|
| ブランド | エクスパワー |
| モデル名 | P-800 |
| 電源 | AC |
| モーター | 3/4 HP Induction Motor |
| 風量 | 3200 CFM（XNUMX分あたりの立方フィート） |
| ワットtage | 862.5ワット |
| 巻tage | 115ボルト |
| Amp怒りのドロー | 7.5 Amps（最大） |
| パワーレベルの数 | 3 |
| 運用ポジション | 4 (0°、20°、45°、90°) |
| 製品寸法 | 17.5"D x 15.9"W x 18.5"H (Note: JSON provided 30"D x 8"W x 6"H, but feature bullets state 17.5" x 15.9" x 18.5" which aligns better with image and product type. Using feature bullet dimensions.) |
| アイテム重量 | 23 ポンド |
| コードの長さ | 25フィート |
| 安全認証 | ETL / CETL |
| 制御方法 | ボタンコントロール |
| 屋内/屋外での使用 | 屋内 |
7. 保証とサポート
The XPOWER P-800 Pro Centrifugal Air Mover comes with a 1年間の限定保証この保証は、通常の使用における材料および製造上の欠陥をカバーします。
For warranty claims, technical assistance, or any product-related inquiries, please contact XPOWER's California-based customer service team. They are available to provide comprehensive support and ensure a satisfactory customer experience.
保証を有効にするために購入証明書を保管してください。
