導入
This manual provides comprehensive instructions for the installation, operation, and maintenance of your StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2). This device enables you to share a USB printer with multiple users across your local area network (LAN), eliminating the need for individual printers at each workstation.
The print server supports web-based management for easy setup and monitoring, allowing flexible placement of your printer. It is compatible with most standard USB printers and works with both Mac and Windows operating systems, including Windows 10. It also supports Line Printer Remote (LPR) protocol and Bonjour Print Services for broad network printing capabilities.
パッケージ内容
インストールを続行する前に、以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。
- 1x StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2)
- 1x Universal Power Adapter (NA/UK/EU/AU)
- 1x RJ45 Network Cable
- 1xクイックスタートガイド
セットアップとインストール
Follow these steps to set up your network print server:
- Connect the Print Server to Power: Connect the universal power adapter to the DC 5V port on the print server and plug it into a power outlet. The Power LED indicator on the print server should illuminate.
- ネットワークに接続する： Connect one end of the included RJ45 network cable to the Ethernet port on the print server and the other end to an available Ethernet port on your network router or switch. The Link and Act LEDs on the print server's Ethernet port should indicate network activity.
- プリンターに接続: Connect your USB printer to the USB Type-A port on the print server using a standard USB printer cable (not included).
- 初期設定: The print server can be configured via a web browser. Refer to the included Quick Start Guide for detailed instructions on accessing the web-based management interface and configuring network settings, including IP address assignment (DHCP supported).
手術
Once the print server is set up and configured on your network, users can print to the connected USB printer from any computer on the same LAN. The print server supports various network protocols for broad compatibility.
Supported Operating Systems and Protocols:
- オペレーティング システム: Compatible with Mac and Windows operating systems, including Windows 10.
- ネットワークプロトコル： Supports Line Printer Remote (LPR) protocol and Bonjour Print Services.
- ネットワークの互換性： Works with any network that can communicate on 10Base-T or 100Base-T Ethernet.
Note: Printing from Android, iPad, and iPhone devices is not supported by this print server.
メンテナンス
The StarTech.com PM1115U2 Network Print Server is designed for reliable operation with minimal maintenance. To ensure optimal performance and longevity:
- 清潔に保ちます： 定期的に、柔らかく乾いた布でデバイスの外側を拭いてほこりを取り除いてください。液体クリーナーやエアゾールは使用しないでください。
- 換気： 過熱を防ぐため、デバイスは必ず換気の良い場所に設置してください。通気口を塞がないでください。
- ファームウェアの更新： Check the StarTech.com website periodically for any available firmware updates for your model. Firmware updates can improve performance, add features, or resolve issues.
- ケーブル接続: Ensure all cables (power, Ethernet, USB) are securely connected to prevent intermittent connectivity issues.
トラブルシューティング
If you encounter issues with your StarTech.com Network Print Server, consider the following troubleshooting steps:
- 電源なし:
- Verify the power adapter is securely connected to the print server and a working power outlet.
- Check if the Power LED on the print server is illuminated.
- ネットワーク接続なし:
- Ensure the RJ45 network cable is securely connected to both the print server and your network router/switch.
- Check the Link and Act LEDs on the print server's Ethernet port. If they are off, there might be a cable issue or a problem with the network port on your router/switch.
- Verify the print server has a valid IP address on your network. This can be checked via the webに基づく管理インターフェイス。
- プリンターが応答しません:
- Ensure the USB printer cable is securely connected between the print server and the printer.
- Verify the printer is powered on and in a ready state.
- Confirm that the correct printer drivers are installed on the client computers attempting to print.
- Restart the print server and the printer.
- アクセスできません Web インタフェース：
- Ensure your computer is on the same network segment as the print server.
- Verify the IP address of the print server. If it's set to DHCP, check your router's DHCP client list. If it's static, ensure you are using the correct IP address.
- アクセスをブロックしている可能性のあるコンピューター上のファイアウォール ソフトウェアを一時的に無効にします。
For further assistance, refer to the online FAQs and IT Pro Community available on the StarTech.com website. You can also consult the official ユーザーマニュアル（PDF） or インストールマニュアル（PDF） provided by StarTech.com.
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | PM1115U2 |
| ブランド | StarTech.com |
| 製品寸法 | 2.1 x 2.1 x 0.9 インチ (5.33 x 5.33 x 2.29 cm) |
| アイテム重量 | 2.18オンス（0.06 kg） |
| ハードウェアインターフェイス | Ethernet, USB, USB 2.0 |
| データリンクプロトコル | IEEE802.3 規格 |
| データ転送速度 | 100メガビット/秒 |
| 色 | 黒 |
| 対応デバイス | プリンター |
| 欧州連合 | 065030855174 |
保証とサポート
For information regarding product warranty, technical support, and additional resources, please visit the official StarTech.com webサイトを参照するか、製品に付属のドキュメントを参照してください。
StarTech.com offers a range of support options, including online FAQs, a knowledge base, and direct technical assistance to help you with any queries or issues you may encounter.
公式ユーザーマニュアル（PDF）： ダウンロードはこちら
公式インストールマニュアル（PDF）： ダウンロードはこちら
