Casio SGW-450H-2BCF Twin Sensor Analog-Digital Watch User Manual

導入

Welcome to your new Casio SGW-450H-2BCF Twin Sensor Analog-Digital Watch. This timepiece combines a classic analog display with advanced digital features, including a Twin Sensor for altimeter and barometer/thermometer readings. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your watch.

画像: 正面 view of the Casio SGW-450H-2BCF Twin Sensor Analog-Digital Watch, showcasing its black resin band and multi-function dial.

主な特徴

• アナログデジタル表示: Combines traditional watch hands with a clear digital readout.
• Twin Sensor: Integrated altimeter for altitude measurement and barometer/thermometer for atmospheric pressure and temperature readings.
• 耐水性: 定格水深 100 メートル (330 フィート)。水泳やシュノーケリングに適しています。
• ワールドタイム: Displays current time in 48 cities across 31 time zones.
• ストップウォッチ： 1/100-second stopwatch function.
• カウントダウンタイマー： さまざまなタイミングのニーズに対応します。
• 毎日のアラーム: Up to 5 independent daily alarms.
• LEDバックライト: 暗い場所でも読みやすい照明を提供します。

初期設定

時刻と日付の設定

1. タイムキーピングモードでは、 ボタン (top left) until the city code starts to flash.
2. 使用 Bボタン （右上）と Dボタン (bottom right) to select your home city code.
3. を押す Cボタン (bottom left) to cycle through the settings: DST (Daylight Saving Time), 12/24-hour format, seconds, hour, minute, year, month, day.
4. 使用 B そして D buttons 点滅値を調整します。
5. を押す ボタン 設定モードを終了します。

Analog Hand Adjustment

If the analog hands do not match the digital time, perform the following steps:

1. タイムキーピングモードでは、 Dボタン until the hands start to move.
2. プレス D again to advance the hands by 20 seconds. Hold D 急速に前進する。
3. を押す ボタン to synchronize the hands with the digital time.

動作モード

Your watch has several operating modes. Press the Cボタン それらを循環させます。

Image: The Casio SGW-450H-2BCF watch displayed on a wrist, illustrating its size and fit during use.

計時モード

これはデフォルトのモードで、現在の時刻、日付、曜日を表示します。

高度計モード

Measures and displays current altitude. Press the Bボタン 高度計モードに入ります。

• 較正： For accurate readings, calibrate the altimeter regularly using a known altitude reference.

気圧計/温度計モード

Measures and displays atmospheric pressure and temperature. Press the Dボタン to enter Barometer/Thermometer Mode.

• 温度測定： For accurate temperature readings, remove the watch from your wrist for at least 20-30 minutes to avoid body heat interference.

ストップウォッチモード

経過時間を測定します。 C to navigate to Stopwatch Mode.

• 開始/停止: プレス B.
• リセット： プレス D while stopped.

アラームモード

Set up to 5 daily alarms. Press C アラームモードに移動します。

• 目覚ましを設定する： 使用 A to select alarm number, Ｂ/Ｄ 時間を調整します。
• オン/オフ: プレス B 切り替えます。

ワールドタイムモード

View the current time in 48 cities (31 time zones). Press C ワールドタイムモードに移動します。

• Change City: 使用 B そして D.

メンテナンスとケア

耐水性

This watch is water resistant to 100 meters (330 feet). It is suitable for swimming and snorkeling, but not for scuba diving. Do not operate buttons while the watch is wet or submerged to prevent water ingress.

クリーニング

Wipe the watch with a soft, dry cloth. For resin bands, use a mild soap solution and rinse thoroughly with fresh water, then dry completely. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish or materials.

バッテリー交換

The watch uses 1 Lithium Metal battery. Battery life varies depending on usage of features like the backlight and sensors. When the display becomes dim or functions become erratic, it indicates a low battery. Replace the battery at an authorized Casio service center to ensure proper sealing and functionality.

トラブルシューティング

時刻表示が正しくない

If the analog hands do not match the digital time, perform the analog hand adjustment procedure described in the "Initial Setup" section.

Inaccurate Sensor Readings

• 高度計： Calibrate the altimeter frequently using a known altitude. Atmospheric pressure changes can affect readings, so re-calibration is recommended before critical measurements.
• 温度計: Ensure the watch is removed from your wrist for accurate temperature measurement, as body heat significantly impacts readings. Allow 20-30 minutes for the watch to acclimate to ambient temperature.
• バロメーター： Sudden weather changes can cause rapid fluctuations. Ensure proper calibration and understand that readings reflect local atmospheric pressure.

ディスプレイが空白または暗い

This may indicate a low battery. Replace the battery at an authorized service center. If the issue persists after battery replacement, contact customer support.

仕様

保証とサポート

Your Casio SGW-450H-2BCF watch comes with a manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the warranty card included with your original purchase. In most cases, warranty claims and service should be directed to the seller of record or an authorized Casio service center.

For further assistance, technical support, or to locate an authorized service center, please visit the official Casio web販売店のウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証に関するお問い合わせに備えて、購入証明書を保管してください。

Image: The product packaging box for the Casio watch, typically containing the watch, manual, and warranty information.