1. はじめに
This manual provides detailed instructions for the assembly, operation, maintenance, and safety of your Graco Remi 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and use to ensure safe operation and proper functionality of the product.
Image 1.1: The Graco Remi 4-in-1 Convertible Crib and Changer, showcasing its integrated design with a crib, changing table, and storage drawer.
The Graco Remi is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed (conversion kits sold separately). It features an attached changing table with storage and a full-size under-crib storage drawer.
2. 安全情報
Your Graco Remi Convertible Crib and Changer is designed and manufactured to meet or exceed applicable safety standards. Adherence to the following safety guidelines is crucial for your child's well-being.
- GREENGUARDゴールド認証: This product has been screened for over 10,000 chemicals and VOCs known to pollute indoor air, contributing to a cleaner, healthier environment for your child.
- JPMA Certified: The product has been expert tested by third-party, accredited laboratories to meet or exceed all applicable category voluntary and mandatory safety standards.
- Always ensure all hardware is securely tightened. Periodically check for loose hardware, damaged parts, or sharp edges.
- 部品が不足、破損、または壊れている場合は、ベビーベッドを使用しないでください。交換部品については、カスタマーサポートにお問い合わせください。
- The crib may only be used until your child can easily climb out or is taller than 35 inches (89 cm).
- Use only a standard full-size crib and toddler mattress that fits snugly without gaps.
- Never place the crib near windows where cords from blinds or drapes could strangle a child.
- Do not use the changing table if your child exceeds the maximum weight recommendation (50 pounds) or can climb out unaided.
Image 2.1: The GREENGUARD Gold Certified logo, signifying low chemical emissions for improved indoor air quality.
Image 2.2: The JPMA Certified seal, confirming the product meets rigorous safety standards.
3. 製品の構成と機能
The Graco Remi 4-in-1 Convertible Crib and Changer is a versatile nursery solution crafted from pine wood, engineered wood, and wood composites. Key features include:
- 4-in-1 Conversion: Easily converts from a crib to a toddler bed, daybed, and full-size bed with headboard only.
- Integrated Changing Table: Features a water-resistant changing pad with a safety strap, three enclosed storage drawers, and two open shelves.
- Under-Crib Storage Drawer: A full-size drawer with two compartments provides additional storage for nursery essentials.
- 調節可能なマットレスサポート: Offers three different height options to accommodate your growing child.
Image 3.1: Key features of the Graco Remi, including adjustable mattress support, integrated storage, and changing table.
4. 組み立て手順
Assembly of the Graco Remi 4-in-1 Convertible Crib and Changer is required. Please ensure you have all components and hardware before beginning. Refer to the detailed assembly guide included in your product packaging for step-by-step instructions and diagrams. It is recommended to assemble the unit in the room where it will be used.
- すべてのコンポーネントを開梱し、組み立てガイドの部品リストと照合します。
- Use the provided hardware and tools as specified in the instructions.
- お子様をベビーベッドに寝かせる前に、すべての接続が安全かつ安定していることを確認してください。
- The changing table drawers feature Euro drawer glides for smooth operation.
Image 4.1: The Graco Remi crib and changer fully assembled, ready for use.
5. 操作手順
The Graco Remi offers four configurations to accommodate your child's developmental stages。
Image 5.1: Visual representation of the 4-in-1 conversion capabilities of the Graco Remi.
5.1 Crib Configuration
The crib features an adjustable mattress support base with three height options. Adjust the mattress height to the lowest position once your child can sit up unassisted.
- 最高位: 手や膝をついて立ち上がることができない新生児や乳児に。
- 中間位置： For infants who can push up on their hands and knees but cannot sit up unassisted.
- 最低位置: For infants who can sit up unassisted or pull themselves to a standing position.
Image 5.2: Crib mattress support shown in the lowest position for child safety.
5.2 Toddler Bed Conversion
To convert the crib into a toddler bed, remove the front crib rail and install the compatible Graco Toddler Safety Guardrail (Model 01350-30 Series, sold separately). Ensure the mattress support is in the lowest position.
5.3 Daybed Conversion
For daybed configuration, remove the front crib rail. No guardrail is required for this stage. The mattress support should remain in the lowest position.
Image 5.3: The Graco Remi in daybed configuration.
5.4 Full-Size Bed Conversion
To convert to a full-size bed, the crib side rails and mattress support are removed, and the headboard is used with a compatible full-size bed conversion kit (sold separately). Follow the instructions provided with the conversion kit.
Image 5.4: The Graco Remi headboard as part of a full-size bed setup.
5.5 チェンジングテーブルの使用
The attached changing table includes a water-resistant changing pad with a safety strap. Always secure your child with the safety strap while using the changing table. The three enclosed drawers and two open shelves provide convenient storage for diapers, wipes, and other changing necessities.
Image 5.5: Detail of the changing table with its pad and storage drawers.
6. メンテナンスとケア
Proper maintenance ensures the longevity and safety of your Graco Remi crib and changer.
- クリーニング： 広告で表面を拭くamp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や強い化学薬品は使用しないでください。
- 検査： Regularly inspect all screws, bolts, and other hardware to ensure they are tight and secure. Tighten as necessary.
- ストレージ： If storing the product, ensure it is kept in a dry environment to prevent warping or damage to the wood.
7。 トラブルシューティング
If you encounter any issues with your Graco Remi, consider the following general troubleshooting steps:
- 緩んだ部品: If any part feels loose or wobbly, re-check the assembly instructions and tighten all corresponding hardware.
- 引き出しの操作: If drawers are not sliding smoothly, ensure they are correctly aligned on their Euro glides and that no obstructions are present.
- 不足しているコンポーネント: If you believe parts are missing, refer to the parts list in your assembly manual and contact customer support.
- 変換の問題: When converting the crib, ensure all previous configuration hardware is removed and new hardware (if applicable) is correctly installed according to the specific conversion instructions.
For persistent issues or concerns not addressed here, please contact Graco customer support.
8. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | 04586-211 |
| ブランド | グラコ |
| 色 | 白 |
| 材料 | パイン材、エンジニアードウッド、木材複合材 |
| 製品寸法（長さ x 幅 x 高さ） | 71.77インチ x 29.53インチ x 35.94インチ |
| アイテム重量 | 105 ポンド |
| Maximum Weight Recommendation (Changing Table) | 50 ポンド |
| 推奨最大高さ（ベビーベッド） | 35インチ（89 cm） |
| 認定資格 | GREENGUARDゴールド認証、JPMA認証 |
| 組み立てが必要 | はい |
| お手入れ方法 | Dで拭くamp 布 |
Image 8.1: Product dimensions for the Graco Remi 4-in-1 Convertible Crib and Changer.
9. 保証とサポート
Your Graco Remi 4-in-1 Convertible Crib and Changer is backed by a 1年間のメーカー限定保証この保証は、通常の使用における材料および製造上の欠陥をカバーします。
For warranty claims, replacement parts, or technical assistance, please contact Graco customer support. Keep your proof of purchase for warranty validation.
- Refer to the contact information provided in your product packaging or visit the official Graco webサポート詳細のサイト。
