Aeotec Multisensor 6 Z-Wave Plus Instruction Manual

1. はじめに

The Aeotec Multisensor 6 is a Z-Wave Plus enabled device designed to provide comprehensive environmental monitoring for your smart home system. This compact sensor integrates six different detection capabilities into a single unit: motion, temperature, humidity, ambient light, ultraviolet (UV) light, and vibration. It utilizes the Z-Wave 500 series chip for enhanced wireless range and communication speed, and includes AES 128-bit security encryption.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Multisensor 6 to ensure optimal performance and integration with your Z-Wave network.

2. 箱の中身

Carefully unpack the contents of your Multisensor 6 package. The following items should be included:

• Aeotec Multisensor 6 Unit
• バッテリーカバー
• バックマウントアーム
• 両面テープ
• ネジ（×2）
• マイクロUSBケーブル

図2.1: Contents of the Multisensor 6 package.

3.製品オーバーview

The Aeotec Multisensor 6 is a versatile device capable of detecting multiple environmental parameters:

• モーションセンサー: 視野内の動きを検知する view.
• 温度センサー: 周囲温度を測定します。
• 湿度センサー： Monitors the relative humidity of the environment.
• 光センサー: Measures ambient light levels (lux).
• UVセンサー: Detects ultraviolet light, providing data on UV index.
• 振動センサー: Functions as a tamper switch, detecting physical disturbance.

図3.1: 角度付き view of the Multisensor 6.

4. セットアップ

4.1 デバイスへの電源供給

The Multisensor 6 can be powered in two ways:

• バッテリー電源: Insert two (2) CR123A batteries into the battery compartment. Ensure correct polarity.
• USB電源： Connect the provided Micro USB cable to the sensor's USB port and to a DC 5V 500mA power adapter (not included).

Using USB power allows the sensor to operate in a more frequent reporting mode, while battery power conserves energy for longer operation between changes.

図4.1: 後方 view of the Multisensor 6 with power input.

4.2 Z-Wave ネットワークの包含（ペアリング）

To integrate the Multisensor 6 into your Z-Wave network, follow these steps:

1. Place your Z-Wave gateway/hub into inclusion (pairing) mode. Refer to your gateway's manual for specific instructions.
2. Bring the Multisensor 6 close to your Z-Wave gateway.
3. Press the Action Button on the Multisensor 6 once. The LED indicator will flash to confirm inclusion mode.
4. If inclusion is successful, the LED will stop flashing and remain solid for a few seconds before turning off. The Multisensor 6 will appear in your Z-Wave controller's device list.
5. If inclusion fails, the LED will flash rapidly for a longer period. Repeat the steps or try Z-Wave exclusion first (see Section 6.1).

注記： For optimal performance and to utilize all features, ensure your Z-Wave gateway supports Z-Wave 500 series devices and is updated to the latest firmware.

5. 操作手順

Once successfully included in your Z-Wave network, the Multisensor 6 will begin reporting data from its various sensors to your Z-Wave gateway. You can typically view and manage these sensor readings through your Z-Wave controller's interface or associated smart home application.

5.1 Sensor Readings

• モーション： Reports motion detection (ON/OFF).
• 温度： Provides temperature readings in Fahrenheit or Celsius.
• 湿度: Reports relative humidity as a percentage.
• ライト： Reports ambient light in lux.
• UV： Reports the UV index.
• 振動： レポートtamper events (ON/OFF).

5.2構成パラメーター

The Multisensor 6 offers various configuration parameters that can be adjusted via your Z-Wave gateway to customize its behavior, such as reporting intervals, motion sensitivity, and LED indicator behavior. Consult your Z-Wave gateway's documentation and the Aeotec Multisensor 6 technical specifications for a complete list of configurable parameters and their values.

6. インストール

The Multisensor 6 offers flexible installation options to suit various environments.

6.1取り付けオプション

• 表面の配置: The sensor can be placed on any flat surface, such as a shelf or table.
• ネジ取り付け: Use the provided screws and back-mount arm to securely attach the sensor to a wall or ceiling.
• 接着剤による取り付け: Utilize the double-sided tape for a less permanent mounting solution on flat surfaces.

6.2 最適な配置

• For motion detection, place the sensor where it has a clear line of sight to the area you wish to monitor. The motion sensor has a 16-foot range and a 120° field of view.
• Avoid placing the sensor near heat sources, direct sunlight, or strong drafts, as these can affect temperature and humidity readings.
• Ensure the sensor is within reliable Z-Wave range of your gateway for consistent communication.

図6.1: 側 view of the Multisensor 6.

7. メンテナンス

7.1 電池の交換

When operating on battery power, the Multisensor 6 will report its battery level to your Z-Wave gateway. When the battery level is low, replace the batteries:

1. Gently twist the sensor unit counter-clockwise to detach it from its mounting base.
2. 電池カバーを取り外します。
3. Remove the old CR123A batteries.
4. 正しい極性を確認して、新しい CR123A 電池 2 個を挿入します。
5. Replace the battery cover and reattach the sensor unit to its base by twisting clockwise.

注記： Always use fresh, high-quality batteries for optimal performance and longevity.

8。 トラブルシューティング

If you encounter issues with your Multisensor 6, consider the following troubleshooting steps:

• センサーが応答しません: Check battery levels or ensure USB power is connected. Verify the sensor is within range of your Z-Wave gateway.
• Inclusion Failure: Try performing a Z-Wave exclusion (unpairing) on your gateway first, then attempt inclusion again. To exclude, put your gateway into exclusion mode and press the Multisensor 6 Action Button once.
• 不正確な読み取り: Ensure the sensor is not exposed to direct sunlight, extreme temperatures, or high humidity if accurate environmental readings are critical. Calibrate sensors if your Z-Wave gateway supports this feature.
• モーション検出の問題: Adjust the sensor's position or sensitivity settings via Z-Wave configuration parameters. Ensure no obstructions block the sensor's field of view.
• Z-Wave Network Issues: Perform a network heal or optimize your Z-Wave network through your gateway's interface.

9. 仕様

10. 保証とサポート

For warranty information, technical support, or further assistance with your Aeotec Multisensor 6, please refer to the official Aeotec web公式サイトをご覧いただくか、カスタマーサポートに直接お問い合わせください。保証請求のために購入証明書を保管してください。