1. はじめに
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Xilence A402 AMD CPU Air Cooler. Please read this manual carefully before proceeding with installation to ensure proper function and longevity of your product.
2.ボックスの内容
以下にリストされているすべてのコンポーネントがパッケージに含まれていることを確認してください。
- 1 x A402 AMD Cooler (Heatsink)
- 1 x 92 mm PWM Fan (pre-assembled)
- 2 x Fan Brackets (pre-assembled)
- 1 x AMD Click Brackets (pre-assembled)
- 1 x Tube of Thermal Compound
- 4 x Mounting Screws (pre-assembled)
3. セットアップとインストール
The Xilence A402 cooler is designed for easy installation on compatible AMD sockets. Follow these general steps for installation:
- Prepare the CPU and Motherboard: Ensure your CPU is properly seated in the socket. Clean the CPU surface thoroughly to remove any old thermal paste or debris.
- サーマルコンパウンドを塗布する: Apply a small amount of the provided thermal compound to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient. Do not spread it manually; the pressure from the cooler will distribute it evenly.
- クーラーの位置: Align the cooler's base with the CPU. The direct touch heatpipes should make full contact with the CPU surface.
- クーラーを固定する: The cooler utilizes AMD Click Brackets. Hook one side of the cooler's mounting clip onto the corresponding tab of the AMD retention module on your motherboard. Apply firm, even pressure to the opposite side of the cooler and hook the second clip onto the other tab of the retention module. Ensure both clips are securely latched. This process may require some force to ensure proper contact pressure.
- ファンを接続します: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Ensure the connection is secure.
4. 操作手順
The Xilence A402 is designed for efficient and quiet operation, suitable for moderate cooling requirements in office, home, and gaming environments.
- 自動ファン制御（PWM）： The included 92mm fan is PWM (Pulse Width Modulation) regulated. This allows your motherboard to automatically adjust the fan speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise.
- 熱性能: The cooler is rated for a Thermal Design Power (TDP) of up to 130 watts, making it effective for a wide range of AMD multi-core processors.
- 静かな動作: The fan operates within a low noise range of 14 - 23.8 dB(A), providing a quiet computing experience.
5. メンテナンス
定期的なメンテナンスを行うことで、最適なパフォーマンスが確保され、CPU クーラーの寿命が延びます。
- ほこりの除去: Periodically inspect the heatsink fins and fan blades for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush to gently remove dust. Ensure the fan is not spinning rapidly when cleaning with compressed air to prevent damage to the bearing.
- サーマルペースト: The thermal compound typically lasts for several years. If you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.
6。 トラブルシューティング
If you encounter issues with your Xilence A402 CPU cooler, consider the following common problems and solutions:
- 高いCPU温度:
- Ensure the cooler is securely mounted and making full contact with the CPU. Re-seat if necessary.
- Verify that thermal paste was applied correctly and is evenly spread. Reapply if needed.
- Check for dust buildup on the heatsink fins and fan blades. Clean thoroughly.
- Confirm the fan is spinning. If not, check the fan cable connection to the motherboard's CPU_FAN header.
- ファンが回転しない、または回転が遅い:
- Check the 4-pin fan cable connection to the motherboard.
- マザーボードの BIOS/UEFI 設定で CPU_FAN ヘッダーが有効になっていることを確認します。
- ファンがケーブルやその他のコンポーネントによって遮られていないことを確認します。
- ファンの騒音が大きすぎる:
- Check for dust buildup on the fan blades.
- Ensure the fan is securely attached to the heatsink and not vibrating against other components.
- Adjust fan speed curves in your motherboard's BIOS/UEFI settings if the noise is consistently high at low temperatures.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| 全体寸法（長さ x 幅 x 高さ） | 101.4 x 72.7 x 137 ミリメートル |
| ヒートパイプ | 2個 |
| 冷却技術 | Direct Touch Cooling |
| TDP（熱設計電力） | 130ワット |
| ファン寸法（長さ x 幅 x 高さ） | 92 x 92 x 25 ミリメートル |
| ファンケーブルの長さ | 300±10mm |
| ファンコネクタ | 4ピンPWM |
| 定格巻tage | 12VDC |
| 開始巻tage | 5VDC |
| 定格電流 | 0.15A±10% |
| 電源入力 | 1.8ワット |
| ファン速度 | 600 - 2200 回転数 ± 10% |
| マックス 気流 | 65.4 CFM |
| 音量 | 14 - 23.8 dB(A) |
| ベアリングタイプ | ハイドロベアリング |
| 総重量 | 396グラム |
| 互換性のあるAMDソケット | AM5, AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2 |
| Compatible AMD Processors | Ryzen R7, R5, R3, FX X8, X6, X4, A12, A10, A8, A6, A4, Phenom 2 X6, X4, X3, Phenom X4, X3, Athlon 2 X4, X3, X2, Athlon X2, Athlon, Athlon FX, Sempron |
8. 保証とサポート
For warranty information and technical support, please refer to the Xilence official webご購入いただいた販売店にお問い合わせいただくか、ウェブサイトをご覧ください。保証請求の際に必要となりますので、購入証明書を保管してください。
