TC Electronic Ditto+ ルーパーペダルユーザーマニュアル

1. はじめに

The TC Electronic Ditto+ Looper Pedal is a compact and powerful looping device designed for musicians. It offers 60 minutes of looping time with unlimited overdubs, dynamic loop length, and 99 loop storage slots. Featuring a high-resolution color display and intuitive 1-knob control, the Ditto+ provides a streamlined looping experience. Its 24-bit uncompressed audio ensures high fidelity, while analog-dry-through preserves your original signal. This manual provides detailed instructions for setting up, operating, and maintaining your Ditto+ Looper Pedal.

2. 主な特徴

Multi-session Looper Pedal with 24-bit Sound Quality
99-loop Storage Capacity
High-resolution Color Display
Unlimited Overdubs
Intuitive 1-knob Control
Dynamic Loop Length for layering long overdubs onto shorter loops
Easy Import and Export of loops via USB
Retains loops in internal memory after power-down
Analog-dry-through design for signal integrity

3.セットアップガイド

3.1 開梱と検査

Carefully remove the Ditto+ Looper Pedal from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or storage.

3.2電源接続

The Ditto+ requires a 9V DC power supply (not included) with a center-negative polarity. Connect the power adapter to the 9V DC input jack on the pedal. Ensure the power supply meets the specifications (9 Volts, 0.1 Amps) to prevent damage.

角度付き view of TC Electronic Ditto+ Looper Pedal showing input/output jacks and power input

画像1: 角度付き view of the Ditto+ pedal, highlighting the input and output jacks on the sides, and the power input jack. This view helps identify connection points.

3.3オーディオ接続

楽器（ギターなど）を入力標準の 1/4 インチ楽器ケーブルを使用して、ペダルの右側にあるジャックに接続します。
接続する出力ペダルの左側のジャックを amp別の標準 1/4 インチ楽器ケーブルを使用して、リファイアーまたはその他のエフェクトペダルに接続します。

3.4 USB接続

The Ditto+ features a USB port for importing and exporting loops. Connect a standard USB cable from the pedal to your computer for managing your loop library. The USB port is located on the top side of the pedal.

角度付き view of TC Electronic Ditto+ Looper Pedal showing the USB port

画像2: 角度付き view of the Ditto+ pedal, clearly showing the USB port located on the top edge of the device, used for data transfer.

4. 操作手順

4.1 基本的なループ関数

フロント view of TC Electronic Ditto+ Looper Pedal with display and controls

画像3: フロント view of the Ditto+ pedal, displaying the main screen, the large central knob, the two arrow buttons, and the footswitch. This image illustrates the primary user interface.

記録： フットスイッチを1回押すと録音が開始されます。ディスプレイに録音ステータスが表示されます。
再生/停止: After recording, press the footswitch once to stop recording and immediately start playback of your loop. During playback, press the footswitch once to stop the loop.
オーバーダブ： While a loop is playing, press the footswitch once to enter overdub mode. Any new audio played will be added to the existing loop. Press again to stop overdubbing and return to playback.
元に戻す/やり直し: Press and hold the footswitch during playback to undo the last overdub. Press and hold again to redo it.
ループをクリア: Double-tap the footswitch quickly to stop playback and clear the current loop. Note: Be mindful of the double-tap timing to avoid accidental clearing during live performance.

4.2 Navigating Loops and Settings

The Ditto+ features a high-resolution color display and a large central knob for navigation and control. The two arrow buttons (< そして >) allow you to scroll through different loop slots (up to 99) or menu options.

Selecting Loops: Use the arrow buttons to navigate between your 99 stored loop slots. The display will show the current loop number.
ループ音量の調整: The large central knob controls the playback volume of the current loop. Turn it clockwise to increase volume and counter-clockwise to decrease.
メニューへのアクセス: Pressing the central knob typically accesses menu options. Use the arrow buttons to navigate menu items and the knob to select or adjust values.

4.3 Extended Looping Mode

The Ditto+ offers an "Extended Looping Mode" which allows you to record a short initial loop and then overdub a longer phrase that automatically extends the overall loop length. This is particularly useful for creating complex arrangements.

Activate Extended Loop Mode: To enable this mode, press and hold both arrow buttons simultaneously. A menu will appear on the display. Navigate to the "Extended Loop Mode" option and select "ON".
Recording in Extended Mode:
- Record your initial, shorter loop as usual (press footswitch once to start, once to end).
- Immediately after the initial loop starts playing, press the footswitch once to enter overdub mode.
- Play your longer overdub. The pedal will use the original loop as a timing reference.
- To end the extended overdub, tap the footswitch 早い, before the desired end point. The pedal will then close the loop at the end of the next full bar, based on the original loop's timing. This ensures a musically coherent loop extension.
Subsequent Overdubs: After the extended loop is established, subsequent overdubs will function as normal, adding layers to the new, longer loop.

Note: The extended loop feature typically allows for one primary extension. You cannot infinitely re-adjust the loop length multiple times using this method.

4.4 インポート/エクスポートループ

Connect the Ditto+ to your computer via USB. The pedal will appear as a mass storage device, allowing you to drag and drop audio files (WAV format recommended) to and from its internal memory. This enables you to back up your loops or load pre-recorded tracks.

5. メンテナンス

クリーニング： ペダルの外側を拭く際は、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤は使用しないでください。
ストレージ： When not in use for extended periods, store the pedal in a dry, cool environment, away from direct sunlight and extreme temperatures.
力：ペダルを使用していないときや清掃中は必ず電源を切ってください。

6。トラブルシューティング

問題	考えられる原因	解決
No power / Pedal does not turn on	Incorrect power supply; loose connection; faulty power adapter.	Ensure a 9V DC, center-negative power supply is used. Check all connections. Try a different power adapter if available.
ペダルから音が出ない	Incorrect audio connections; instrument volume low; amplifier off; faulty cables.	機器を確認し、 amplifier connections. Check instrument and amplifier volume. Test with different cables.
Loop clears unexpectedly	Accidental double-tap of footswitch.	The "clear loop" function is a quick double-tap. Practice precise footswitch presses to avoid accidental clearing.
Difficulty with Extended Looping Mode	Incorrect activation or timing.	必ず押して hold both arrow buttons simultaneously to activate the mode. For ending an extended overdub, tap the footswitch 早い to allow the pedal to close the loop at the next bar's end.
Loops not saving	Power interruption during saving; memory issue.	The Ditto+ automatically retains loops. If issues persist, try re-saving or performing a factory reset (refer to official TC Electronic documentation for reset procedures).

7. 技術仕様

モデル： Ditto+
ブランド： TCエレクトロニック
商品の重量: 6.3オンス
製品寸法: 4 x 2.6 x 2.4インチ
ハードウェアインターフェイス： USB
信号フォーマット： アナログ
電源: コード式電気
巻tage: 9ボルトDC
Amperage： 0.1 A (100mA)
コントロールタイプ： Knob, Footswitch, Buttons
ループストレージ: 99スロット
ループ時間： 最大60分
オーディオ品質： 24ビット非圧縮

8. 保証とサポート

For warranty information, technical support, or further assistance with your TC Electronic Ditto+ Looper Pedal, please refer to the official TC Electronic web公式サイトをご覧いただくか、カスタマーサポートに直接お問い合わせください。 AmazonのTC Electronic Store 追加の製品情報とリソースについては、こちらをご覧ください。

	TC Electronic Ditto Looper ユーザーマニュアル TC Electronic Ditto Looperの包括的なユーザーマニュアル。セットアップ、操作、機能、技術仕様、トラブルシューティングを網羅しています。ループの録音、オーバーダビング、アンドゥ、リドゥ、管理方法を学びましょう。
	TC Electronic Ditto Looper ユーザーマニュアル: 機能、操作、セットアップ TC Electronic Ditto Looperギターペダルの包括的なユーザーマニュアル。機能、操作、セットアップなどについて詳しく説明します。amples、技術仕様、およびトラブルシューティング。
	TC Electronic Ditto X4 Looper ユーザーマニュアル - ギターエフェクトペダルガイド Comprehensive user manual for the TC Electronic Ditto X4 Looper, a dual-track guitar looper pedal. Learn about its features, controls, effects, setup, hookup diagrams, and advanced functions for creating and managing loops.
	TC Electronic Ditto Looper ユーザーマニュアル TC Electronic Ditto Looperの包括的なユーザーマニュアル。ギター／ベースプレイヤー向けに、機能、操作、セットアップ、技術仕様を詳細に解説しています。ループの録音、オーバーダビング、アンドゥ、リドゥ、管理方法も解説します。
	TC Electronic Ditto Looper ユーザーマニュアル Comprehensive user manual for the TC Electronic Ditto Looper, detailing its features, setup, operation, specifications, and troubleshooting. Learn how to record, overdub, undo, and manage loops with this compact guitar effects pedal.
	TC Electronic DITTO JAM X2 LOOPER クイックスタートガイドミュージシャンのための多機能ルーパーペダル、TC Electronic DITTO JAM X2 LOOPERのクイックスタートガイド。ループクリア、BeatSense LED機能、マイクの配置、規制への準拠について解説します。