Defiant 270度ブラック交換用屋外モーションセンサー取扱説明書

1.製品オーバーview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. 安全情報

本製品を設置または操作する前に、必ずすべての指示をよく読んで理解してください。指示に従わない場合、感電、火災、その他の危険が発生し、物的損害や人身傷害につながる可能性があります。

• 警告：感電の危険があります。 設置または保守を行う前に、回路ブレーカーまたはヒューズ ボックスの電源を切断してください。
• すべての電気接続が地域の規則や条例に従って行われていることを確認してください。
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• 梱包材はお子様の手の届かないところに保管してください。

3. パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• 取扱説明書（本書）

4. 仕様

5. インストール

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. 電源を切る: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltageテスター。
2. 古いセンサーを取り外す: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. 新しいセンサーを準備する: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. 結線：
   • 接続する 黒線 from the sensor to the 黒（ホット）ワイヤー 電源から。
   • 接続する 赤いワイヤー from the sensor to the black (load) wire 照明器具の。
   • 接続する 白いワイヤー from the sensor to the 白（中性）線 from the power supply and the light fixture.
   • 接続する アース線 (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   すべての接続をワイヤーナットと電気テープで固定します。

5. マウントセンサー： Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. シール接続: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. 電力を回復する： 回路ブレーカーで電源を再びオンにします。

6. セットアップと調整

After installation, adjust the sensor's settings for optimal performance.

• テストモード： Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• 感度調整： Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• 時間調整: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. 操作手順

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. メンテナンス

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• クリーニング： 定期的にセンサーレンズを柔らかくて乾いた布で拭いてください。amp cloth to remove dust, dirt, or debris that may obstruct its view研磨剤や溶剤は使用しないでください。
• 検査： Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• 障害物： Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9。 トラブルシューティング

If your motion sensor is not functioning as expected, try the following steps:

10. 保証とサポート

This Defiant motion sensor comes with a 1年間の限定保証 購入日から。この保証は通常の使用における材料および製造上の欠陥をカバーします。

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webサイト。