Logilink 4-Port Keystone Surface Mount Box NK4034 Instruction Manual

導入

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Logilink 4-Port Keystone Surface Mount Box, model NK4034. This product is designed to house up to four standard Keystone Jack modules, providing a neat and accessible termination point for network cables in surface-mount applications.

正しいセットアップと最適なパフォーマンスを確保するために、インストール前にこのマニュアルをよくお読みください。

安全情報

• Ensure all power is disconnected from any active network components before beginning installation.
• 製品の損傷や怪我を防ぐために、適切な工具を使用して取り付けてください。
• この製品は屋内使用のみを目的としています。
• 製品を湿気や極端な温度にさらさないでください。
• お子様の手の届かない場所に保管してください。

パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• Logilink 4-Port Keystone Surface Mount Box (Unshielded, White)
• Mounting screws (if included by manufacturer)

Note: Keystone Jack modules are sold separately and are not included with this surface mount box.

セットアップとインストール

Follow these steps to install your Keystone Surface Mount Box:

1. 箱を準備する: Gently open the Logilink 4-Port Keystone Surface Mount Box. It typically consists of a base and a cover. Separate these two parts.
   

   画像: インテリア view of the Logilink 4-Port Keystone Surface Mount Box, displaying the four individual slots designed to securely hold Keystone jack modules.

2. Install Keystone Jacks: Insert your desired Keystone Jack modules (e.g., RJ45, HDMI, USB) into the designated slots in the base of the box. Ensure they click securely into place.
   

   画像: クローズアップ view of the box's interior, illustrating how Keystone jacks are inserted and secured within the four available ports.

3. ケーブルの配線: Route the network cables through the cable entry points at the back or sides of the box. Terminate the cables to the installed Keystone Jacks according to their specific instructions.
4. ボックスを閉じる: Once all Keystone Jacks are installed and cables are terminated, carefully place the cover back onto the base, ensuring it snaps or screws into place securely.
5. ボックスをマウントします。 Position the assembled surface mount box on your desired wall or surface. Mark the drilling points through the mounting holes on the base. Drill pilot holes if necessary, then secure the box using appropriate screws.
   

   Image: The exterior of the Logilink 4-Port Keystone Surface Mount Box, displaying the cable entry points and its compact, finished appearance once closed.

操作手順

Once installed, the Logilink 4-Port Keystone Surface Mount Box functions as a passive connection point. Simply connect your network patch cables or other compatible cables to the installed Keystone Jacks as needed. Ensure cables are fully seated for a reliable connection.

メンテナンス

• クリーニング： Use a soft, dry cloth to clean the exterior of the box. Do not use abrasive cleaners or solvents.
• 検査： Periodically check the box and cable connections for any signs of damage or loose connections.
• 環境： Ensure the operating environment remains within recommended temperature and humidity ranges to prolong product life.

トラブルシューティング

• キーストーンジャックが合わない: Ensure you are using standard Keystone Jack modules. Some modules may have slightly different dimensions. Apply gentle, even pressure. If a module still does not fit, it may be incompatible or defective.
• ネットワーク接続不良: Verify that all cables are properly terminated to the Keystone Jacks and that the patch cables are securely connected to the jacks. Check the integrity of the cables and the connected network devices.
• ボックスが正しく閉まらない: Ensure all cables are neatly routed and not obstructing the cover. Verify that the Keystone Jacks are fully seated and not protruding.

仕様

保証情報

For detailed warranty information, please refer to the documentation provided with your purchase or contact your retailer. Warranty terms and conditions may vary by region and seller.

サポート

If you encounter any issues or require technical assistance, please contact your point of purchase or visit the official Logilink webサポート リソースのサイト。