1. はじめに
This manual provides instructions for the proper setup, operation, and maintenance of your Sharp VC-H992U Hi-Fi Stereo VCR Player/Recorder. Please read this manual thoroughly before using the unit to ensure optimal performance and longevity.
2. 安全情報
- 電源: Connect the VCR only to the power supply indicated on the unit's label.
- 換気： Ensure adequate ventilation. Do not block ventilation openings. Avoid placing the unit on soft surfaces that may block vents.
- 水分： 本体を雨や湿気にさらさないでください。花瓶など、液体の入った物を本体の上に置かないでください。
- クリーニング： 清掃する前に、本体の電源プラグをコンセントから抜いてください。柔らかく乾いた布を使用してください。液体洗剤やエアゾール洗剤は使用しないでください。
- サービス: この製品を自分で修理しようとしないでください。 すべてのサービスを資格のあるサービス担当者に依頼してください。
- オブジェクトと液体のエントリ： 危険な電圧に触れる可能性があるため、開口部から本製品にいかなる物も押し込まないでください。tag故障やショートの原因となる箇所があります。
3.製品オーバーview
The Sharp VC-H992U is a 4-head Hi-Fi Stereo VCR with Rapid Rewind capabilities, designed for playing and recording VHS tapes. It features 19 micron heads, EZ set up, auto clock setting, S-VHS quasi playback, and an auto head cleaner.
Front Panel and Remote Control
画像1: The Sharp VC-H992U VCR unit with its universal remote control resting on top. The VCR features a black finish with a front-loading tape slot and various control buttons.
画像2: クローズアップ view of the Sharp VC-H992U VCR's front panel. Visible controls include POWER, EJECT, SET, MENU, CHANNEL up/down, S.PICTURE, PAUSE/STILL, and REC buttons. The VHS HQ logo and '4-HEAD Hi-Fi STEREO / RAPID REWIND' text are also prominent.
ディスプレイパネル
画像3: 詳細な view of the VCR's digital display, showing '0:00:05' which typically indicates tape counter or time. Indicators for SP (Standard Play) and VCR mode are also visible.
背面パネルの接続
画像4: The rear panel of the Sharp VC-H992U VCR, displaying various input and output ports. These include RF IN/OUT (VHF/UHF/CATV), Video IN/OUT (RCA yellow), and Audio IN/OUT (RCA white/red for Left/Right stereo). A product label with model number VC-H992U and serial number is also visible.
4. セットアップ
4.1 開梱
- Carefully remove the VCR and all accessories from the packaging.
- Verify that all components are present: VCR unit, remote control, power cord, and any included cables (e.g., RCA audio/video cables, coaxial cable). If an HDMI cable is provided, it is intended for use with an external adapter, as this VCR model does not have a native HDMI port.
4.2 テレビへの接続
There are typically two main ways to connect your VCR to a television:
- RCA (Composite Video/Audio): Use RCA cables (yellow for video, white for left audio, red for right audio). Connect the VCR's VIDEO OUT and AUDIO OUT (L/R) jacks to the corresponding VIDEO IN and AUDIO IN (L/R) jacks on your television. Select the appropriate AV input on your TV (e.g., AV1, Video 1).
- Coaxial (RF): Connect a coaxial cable from the VCR's RF OUT jack to the ANTENNA IN or CABLE IN jack on your television. Tune your TV to channel 3 or 4 (depending on the VCR's output setting, usually switchable on the VCR's rear panel).
4.3電源接続
- Plug the VCR's power cord into a standard AC wall outlet.
4.4 リモートコントロールの設定
- リモコンの背面にある電池ボックスを開きます。
- 正しい極性 (+/-) を確認して、単三電池 3 本を挿入します。
- 電池ケースを閉じます。
5. 操作手順
5.1 基本的な再生
- Turn on the VCR and your television. Select the correct input on your TV.
- Insert a VHS tape into the tape slot on the front of the VCR. The VCR will automatically load the tape.
- を押す 遊ぶ VCR またはリモコンのボタン。
- 再生を停止するには、を押します 停止 ボタン。
- 早送りまたは巻き戻しするには、 FF（早送り） or REW（巻き戻し） ボタン。 プレス 遊ぶ 通常の再生を再開します。
- テープを取り出すには、 排出 ボタン。
5.2 基本的な録音
- Ensure the VCR is connected to a signal source (e.g., cable box, antenna) via the RF IN or AV IN jacks.
- Insert a recordable VHS tape into the VCR. Ensure the erase-protection tab on the tape is intact (not broken off).
- Tune the VCR to the desired channel or select the appropriate input (e.g., L1 for Line 1 input).
- を押す REC（レコード） button. The VCR will begin recording.
- 録音を停止するには、を押します 停止 ボタン。
5.3 タイマー録音
Timer recording allows you to record a program at a specified time and channel. While specific programming steps can vary, general steps include:
- を押す メニュー button on the remote or VCR.
- Navigate to the 'Timer Record' or 'Program' menu using the arrow keys.
- Select an empty program slot.
- Set the start time, end time, date (or day of the week for recurring recordings), and the channel to be recorded.
- Confirm the settings and exit the menu. Ensure the VCR is powered off or in standby mode for the timer recording to activate.
Note: Detailed timer programming may require consulting the original manufacturer's manual or experimenting with the VCR's menu system.
5.4 Adjusting Picture and Sound
- 使用 S.PICTURE button on the VCR or remote to cycle through various picture enhancement modes during playback.
- Adjust volume using your television's remote control.
6. メンテナンス
6.1 ユニットのクリーニング
- Unplug the VCR from the power outlet before cleaning.
- Wipe the exterior of the VCR with a soft, dry cloth. For stubborn marks, a slightly damp 布で拭いた後、乾いた布で拭いてください。
- 研磨剤入りの洗剤、溶剤、化学スプレーは仕上げを傷める恐れがあるので使用しないでください。
6.2 ヘッドクリーニング
The Sharp VC-H992U features an auto head cleaner. For optimal performance, it is recommended to use a dry-type VCR head cleaning tape periodically (e.g., every 50-100 hours of use) if you notice picture degradation. Follow the instructions provided with the cleaning tape.
7。 トラブルシューティング
If you encounter issues with your VCR, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電源なし | Power cord unplugged; outlet not working | 電源コードの接続を確認し、別のデバイスでコンセントをテストします。 |
| No picture/sound during playback | Incorrect TV input selected; A/V cables loose or incorrect; VCR not tuned to correct channel (RF connection) | Select correct TV input (e.g., AV1, Video 1); check all cable connections; if using RF, ensure TV is on channel 3/4. |
| Tape won't eject | Tape jammed; power interruption | Ensure VCR is powered on; try pressing EJECT multiple times. If still stuck, do not force it; seek professional service. |
| 画質が悪い（雪が積もっている、歪んでいる） | Dirty video heads; old/damaged tape; weak signal (recording) | Use a VCR head cleaning tape; try a different tape; check antenna/cable connections. |
| リモコンが動作しない | Dead batteries; obstruction; remote sensor blocked | Replace batteries; ensure clear line of sight to VCR's remote sensor. |
8. 仕様
- ブランド： シャープ
- モデル： VC-H992U
- タイプ： 4-Head Hi-Fi Stereo VCR Player/Recorder
- 特徴： Rapid Rewind, 19 Micron Heads, EZ Set Up, Auto Clock Setting, S-VHS Quasi Playback, Auto Head Cleaner
- 商品の重量: 8.74ポンド
- パッケージ寸法: 16.1 x 12.2 x 5.5インチ
- 電池: 3 AA batteries required for remote (included)
- ASIN: B00NB89MA2
- 発売日: 4年2014月XNUMX日
9. 保証とサポート
As this product is often sold as a refurbished or used item, factory warranty information may not be available. For any post-purchase support, technical assistance, or warranty inquiries related to your specific purchase, please contact the seller directly.
