Samson HP30 Stereo Headphones User Manual

導入

The Samson HP30 Stereo Headphones are designed to deliver quality sound for various applications, from home studio use to on-the-go listening. These headphones feature a lightweight, closed-back design with an adjustable headband, ensuring a comfortable listening experience. Equipped with 40mm full-range drivers, they offer a wide frequency response from 20Hz to 20kHz and an impedance level of 32 ohms, providing balanced sound reproduction. They are suitable for use with keyboards, guitars, MP3 players, and other media devices.

Figure 1: Samson HP30 Stereo Headphones, showcasing their over-ear design and adjustable headband.

設定

The HP30 headphones are designed for straightforward connectivity. To begin using your headphones:

1. オーディオジャックを識別します。 The headphones come with a 3.5mm audio jack.
2. デバイスに接続します: Plug the 3.5mm audio jack into the corresponding audio output port on your device. This could be a keyboard, guitar amplifier, MP3 player, media player, laptop, desktop, tablet, or cellphone.
3. Use the Adapter (if necessary): If your device requires a larger 1/4-inch connection, use the included 1/8-inch to 1/4-inch adapter. Attach the adapter to the 3.5mm jack before plugging it into your device.

Figure 2: The 3.5mm audio jack and the 1/4-inch adapter for versatile device compatibility.

操作手順

Once connected, follow these steps for optimal use:

1. ヘッドバンドを調整します。 Gently extend or retract the adjustable headband to ensure a snug yet comfortable fit over your head. The earcups should fully cover your ears.
2. イヤーカップの位置: Ensure the earcups are properly positioned over your ears for maximum sound isolation and comfort. The closed-back design helps to minimize external noise.
3. コントロールボリューム: Adjust the volume directly from your connected audio source (e.g., MP3 player, keyboard, computer). The HP30 headphones do not feature inline volume controls.
4. Music Practice: For quiet music practice with instruments like keyboards or guitars, the HP30 provides clear and isolated audio monitoring, allowing you to focus on your sound without disturbing others.

メンテナンス

To ensure the longevity and performance of your Samson HP30 Stereo Headphones, follow these maintenance guidelines:

• クリーニング： Use a soft, dry cloth to wipe the exterior of the headphones. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and materials.
• イヤーパッドのお手入れ: The earpads are made from protein leather. Gently wipe them with a damp 必要に応じて布で拭き、使用前に完全に自然乾燥させてください。
• ストレージ： ヘッドホンを使用しないときは、高温や直射日光を避け、清潔で乾燥した場所に保管してください。ケーブルが絡まると損傷する恐れがありますので、ご注意ください。
• ケーブルの取り扱い: Always grasp the plug, not the cable, when connecting or disconnecting the headphones from a device to prevent internal wire damage.

トラブルシューティング

If you encounter issues with your HP30 headphones, consider the following common solutions:

• 音が出ない:
  • Ensure the audio jack is fully inserted into the device's port.
  • Check the volume level on your audio source; it might be muted or set too low.
  • Test the headphones with a different audio source to rule out a device-specific issue.
  • ケーブルに目に見える損傷やねじれがないか検査します。
• 歪んだ音:
  • オーディオソースの音量を下げます。
  • Ensure the audio jack and adapter (if used) are clean and free of debris.
  • Test with another audio source to determine if the distortion is from the headphones or the source.
• 不快なフィット感:
  • Adjust the headband carefully until a comfortable fit is achieved.
  • Ensure the earcups are not pressing too hard or too loosely against your ears.

仕様

製品終了view ビデオ

保証とサポート

For warranty information, technical support, or service inquiries regarding your Samson HP30 Stereo Headphones, please refer to the documentation included in your product packaging or visit the official SAMSON webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。