ソムフィ 1810636

SOMFY Situo RTS Pure Radio Wall Transmitter

Model: 1810636 (Manufacturer Model: 322147)

導入

This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.

安全に関する注意事項

  • デバイスを湿気や極端な温度から遠ざけてください。
  • ご自身でデバイスを開けたり修理したりしないでください。すべての修理は資格のある専門家にご依頼ください。
  • 電池が極性マークに従って正しく挿入されていることを確認してください。
  • 使用済みバッテリーは地域の規制に従って責任を持って廃棄してください。
  • このデバイスは屋内での使用のみを目的としています。

製品終了view

The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.

SOMFY Situo RTS Pure Radio Wall Transmitter with up, my, and down buttons

この画像は正面です view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.

主要コンポーネント:

  • 上ボタン (^): Moves the connected drive upwards (e.g., opens blinds).
  • My Button (my): Stops the drive or recalls a pre-programmed favorite position.
  • 下ボタン (v): Moves the connected drive downwards (e.g., closes blinds).
  • インジケーターライト: Provides visual feedback on commands and battery status.
  • Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.

設定

1. バッテリーの取り付け

  1. Gently slide open the battery compartment cover on the back of the transmitter.
  2. Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
  3. 電池カバーをしっかりと閉じてください。

2. Pairing with a Somfy RTS Drive

To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.

  1. Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
  2. Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
  3. Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.

Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.

操作手順

基本制御:

  • To move the drive up (e.g., open blinds), press the ^ ボタン。
  • To move the drive (e.g., close blinds), press the v ボタン。
  • 停止 the drive at any point, press the my ボタン。

Setting a Favorite Position ('my' position):

  1. Move the drive to your desired favorite position using the ^ or v ボタン。
  2. Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.

Recalling a Favorite Position:

  • From any position, a short press of the my button will move the drive to its pre-programmed favorite position.

メンテナンス

バッテリー交換:

When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.

  1. Slide open the battery compartment cover on the back of the transmitter.
  2. 古い CR2430 電池を取り外します。
  3. 正しい極性 (+/-) に注意して、新しい CR2430 電池を挿入します。
  4. 電池ボックスのカバーを閉じます。

Note: Dispose of old batteries according to local environmental regulations.

クリーニング:

Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.

トラブルシューティング

問題 考えられる原因 解決
送信機が応答しません。 バッテリー切れです。 バッテリーを交換してください。
動作範囲が狭まりました。 Low battery or radio interference. Replace battery. Check for sources of interference (e.g., large metal objects, other radio devices).
Drive does not respond after pairing. Pairing unsuccessful or drive is not powered. Repeat the pairing process. Ensure the drive has power.

仕様

  • モデル: Situo RTS Pure
  • メーカー型番: 322147
  • ブランド: ソムフィ
  • 無線周波数: 433.42 MHz
  • Rolling Code System: はい
  • 範囲: Approximately 20 meters (indoors, depending on environment)
  • 電池のタイプ: CR2430(付属)
  • 寸法: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
  • 使用目的: 屋内

保証とサポート

保証情報および技術サポートについては、Somfyの公式ウェブサイトをご覧ください。 website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.

オンラインリソース: ソムフィ