1. はじめに
The Aiphone VC-K Handset Audio Tenant Station is designed for use within Aiphone VC Series multi-tenant intercom systems. This unit provides private audio communication between a tenant and a visitor at the building entrance. Its durable ABS plastic construction ensures longevity and reliable performance in various residential or commercial settings.
This manual provides essential information for the proper installation, operation, and maintenance of your VC-K tenant station. Please read it thoroughly before installation and retain it for future reference.
2. 安全上の注意
Observe the following safety precautions to prevent injury to yourself or others and to avoid damage to the equipment.
- 電気安全: Installation should be performed by qualified personnel in accordance with all local electrical codes and regulations. Disconnect power before performing any wiring or maintenance.
- 環境条件: Do not expose the unit to extreme temperatures, high humidity, or direct water spray. Ensure the installation location is dry and protected.
- 取り扱い： 本機は丁寧に取り扱ってください。落としたり、強い衝撃を与えたりしないでください。
- 変更点: Do not attempt to modify or disassemble the unit. Unauthorized modifications can lead to malfunction, electric shock, or fire, and will void the warranty.
3. パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- Aiphone VC-K Handset Audio Tenant Station
- 取り付け金具（ネジ、アンカー）
- 取扱説明書（本書）
4. セットアップとインストール
The VC-K tenant station is designed for flush mounting and fits a standard 2-gang electrical box. Proper installation is crucial for optimal performance.
4.1. インストール場所の選択
Select a convenient indoor location, typically near the main entrance of the tenant's unit, where the handset can be easily accessed. Ensure the location allows for proper wiring to the main intercom system.
4.2. ユニットの取り付け
- Ensure power to the intercom system is disconnected at the circuit breaker.
- Prepare a standard 2-gang electrical box in the chosen wall location.
- Connect the necessary wiring from the intercom system to the VC-K unit's terminals. Refer to the wiring diagram provided with your VC Series master station for specific connections.
- Carefully place the VC-K unit into the 2-gang box, ensuring wires are not pinched.
- Secure the unit to the electrical box using the provided mounting screws. Do not overtighten.
- Once mounted, restore power to the intercom system.
図1: Aiphone VC-K Handset Audio Tenant Station. This image shows the white, wall-mounted handset with its coiled cord hanging down, ready for use. The unit is designed for flush installation.
5. 操作
The Aiphone VC-K Handset Audio Tenant Station provides straightforward communication with visitors at your building's entrance.
5.1. 電話を受ける
When a visitor presses the call button at the entrance station, your VC-K handset will ring. To answer the call:
- 受話器をクレードルから持ち上げます。
- Speak into the mouthpiece and listen through the earpiece to communicate with the visitor.
- 会話を終了するには、受話器を受話器台に戻すだけです。
The handset design ensures privacy during conversations, preventing others in the room from overhearing the visitor's audio.
6. メンテナンス
The VC-K tenant station requires minimal maintenance to ensure continued reliable operation.
- クリーニング： Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the ABS plastic finish.
- 検査： Periodically check the coiled cord for any signs of wear or damage. If the cord is damaged, contact a qualified technician for replacement.
- 環境への配慮: Ensure the unit remains in a dry, indoor environment. Protect it from direct sunlight and excessive heat.
7。 トラブルシューティング
If you experience issues with your VC-K Handset Audio Tenant Station, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No audio from handset (earpiece) | Loose wiring connection; faulty handset; issue with master station or wiring. | Check wiring connections at the back of the unit. Ensure the handset is properly seated. If the problem persists, consult your installer or Aiphone support. |
| No audio to visitor (mouthpiece) | Loose wiring connection; faulty handset; issue with master station or wiring. | Check wiring connections. Ensure the handset is properly seated. If the problem persists, consult your installer or Aiphone support. |
| Handset does not ring | No power to the system; faulty wiring; issue with entrance station or master station. | Verify power to the entire intercom system. Check wiring. Test the entrance station. If the problem persists, consult your installer or Aiphone support. |
| 断続的な通信 | Loose wiring; interference; damaged cord. | Inspect all wiring connections. Check the handset cord for damage. Ensure no strong electrical interference sources are nearby. |
If these troubleshooting steps do not resolve the issue, contact your system installer or Aiphone technical support for further assistance.
8. 仕様
- モデル： VC-K
- 製品寸法: 9.8 x 3.6 x 2.3 インチ (24.9 x 9.1 x 5.8 cm)
- 商品の重量: 1.05ポンド（0.48kg）
- 材料： ABS plastic construction
- 色： 白
- 電話の種類: 有線
- 電源: Corded Electric (powered by intercom system)
- ダイヤラーのタイプ: Single Keypad (refers to system functionality, not on handset)
- 応答システムのタイプ: Digital (refers to system functionality)
- 対応デバイス: VC-M Master Station, Additional Tenant Handsets (VC Series)
- 取り付け: Flush mount, fits 2-gang box
9.サポートと保証
For technical assistance, installation inquiries, or warranty information, please contact your authorized Aiphone dealer or the Aiphone Corporation directly. Refer to the official Aiphone web最新の連絡先の詳細とサポート リソースについては、こちらのサイトをご覧ください。
Aiphone Corporation: www.aiphone.com
Please have your product model number (VC-K) and any relevant system information ready when contacting support.
