京セラ MK-3140 メンテナンスキット ユーザーマニュアル

1。 オーバーview

The Kyocera MK-3140 Maintenance Kit (Model 1702P60UN0) is an essential component designed to ensure the optimal performance and longevity of your Kyocera ECOSYS laser printer. This kit contains critical parts that experience wear over time and require periodic replacement to maintain print quality and prevent operational issues.

This maintenance kit is compatible with the following Kyocera ECOSYS Black/White Laser Printers:

• エコシス M3040idn
• エコシス M3145idn
• エコシス M3540idn
• エコシス M3550idn
• エコシス M3560idn
• エコシス M3645idn
• ECOSYS M6535cid

The kit is rated for an estimated yield of up to 200,000 pages at 5% average coverage, after which replacement is typically recommended or indicated by the printer's system.

Image: The brown cardboard box for the Kyocera MK-3140 Maintenance Kit. The box has 'Maintenance Kit' printed on the side in black text, along with handling symbols indicating 'This Way Up', 'Fragile', and 'Keep Dry'.

2.キットの内容

The Kyocera MK-3140 Maintenance Kit includes the following components:

• (1) Paper Pickup/Feed Roller Assembly: Responsible for accurately feeding paper into the printer.
• (1) Separation Pad: Works in conjunction with the pickup roller to ensure only one sheet of paper is fed at a time.

3. インストールとセットアップ

Replacing the maintenance kit components requires careful handling. Always refer to your specific printer model's service manual for detailed, step-by-step instructions and safety precautions. The following are general guidelines:

1. 電源を切ってプラグを抜きます: Before beginning any installation, ensure the printer is turned off and completely unplugged from the power source to prevent electrical shock or damage.
2. 冷却を許可します: If the printer has been in recent operation, allow it to cool down sufficiently, as internal components can be hot.
3. アクセスコンポーネント: Open the necessary covers and panels on your printer to gain access to the paper pickup/feed roller assembly and separation pad. Consult your printer's manual for exact locations and access procedures.
4. 古いコンポーネントを削除します。 Carefully remove the worn paper pickup/feed roller assembly and separation pad. Note their orientation for correct installation of the new parts.
5. 新しいコンポーネントをインストールします: Install the new Kyocera MK-3140 components, ensuring they are securely seated and correctly oriented. Avoid touching the roller surfaces with bare hands to prevent contamination.
6. カバーを閉じる: Close all printer covers and panels securely.
7. メンテナンスカウンターをリセット: After installation, it is often necessary to reset the maintenance counter in your printer's service menu. Refer to your printer's manual for instructions on how to access and reset this counter. Failure to reset the counter may result in continued maintenance warnings.
8. 電源オン: Plug the printer back in and turn it on. Perform a test print to verify proper operation.

重要： Always follow the safety instructions and specific replacement procedures outlined in your Kyocera printer's official service manual. Improper installation can lead to printer malfunction or damage.

4. メンテナンスガイドライン

The MK-3140 is a maintenance kit, meaning its primary function is to facilitate the ongoing maintenance of your printer. Its components are designed to wear out over time and require replacement to ensure consistent print quality and reliable paper handling.

• 交換スケジュール: Replace the maintenance kit when your printer indicates it is due, or when print quality begins to degrade, or paper feeding issues become frequent. The estimated yield is 200,000 pages, but actual replacement intervals may vary based on usage and environmental conditions.
• 純正部品: Always use genuine Kyocera maintenance kits to ensure compatibility, optimal performance, and to maintain your printer's warranty.
• ストレージ： Store unused maintenance kits in their original packaging in a cool, dry place away from direct sunlight and extreme temperatures.

5。 トラブルシューティング

If you experience issues after installing the maintenance kit or if your printer exhibits problems that suggest the kit needs replacement, consider the following:

• 紙詰まり: Frequent paper jams, especially at the paper input, can indicate worn pickup rollers or a faulty separation pad. Ensure the new components are installed correctly.
• 印刷品質が悪い: While primarily related to toner and drum units, severe paper feeding issues can indirectly affect print quality.
• Maintenance Kit Error Messages: If your printer continues to display a maintenance kit error after replacement, ensure you have correctly reset the maintenance counter in the printer's service menu.
• インストールチェック: Double-check that all components are securely installed and that no packaging materials or foreign objects remain inside the printer.
• Consult Printer Manual: For persistent issues, refer to your specific printer model's user manual or service manual for detailed troubleshooting steps.

6. 仕様

7. 保証とサポート

For information regarding product warranty, please refer to the official Kyocera documentation provided with your printer or visit the Kyocera website. For technical assistance or further inquiries, please contact Kyocera customer support.

You can find more information and support resources on the official Kyocera brand store:

Visit the KYOCERA Store on Amazon