1. はじめに
This manual provides essential information for the safe and efficient use of the Omron Z-15GW2-B7-K Industrial Snap Switch. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and prevent potential hazards.
2. 安全情報
警告: 感電および怪我の危険があります。
- Always disconnect power before installing, wiring, or servicing the switch.
- 設置および配線は、すべての地域および国の電気規則に従って、資格のある人が行う必要があります。
- 指定された電流と電圧を超えないでくださいtage評価。
- 感電を防ぐために適切な接地を確保してください。
- Avoid exposing the switch to environments outside its specified operating temperature and IP rating.
3.製品オーバーview
The Omron Z-15GW2-B7-K is an industrial snap switch designed for reliable operation in various control applications. It features a Single Pole Double Throw (SPDT) contact form and a hinge roller lever actuator, providing precise detection of mechanical movement.
図1: Omron Z-15GW2-B7-K Industrial Snap Switch. This image shows the Omron Z-15GW2-B7-K Industrial Snap Switch, featuring a hinge roller lever actuator and screw terminals. The compact design is suitable for various industrial applications.
主な特徴:
- アクチュエータタイプ： Hinge Roller Lever
- お問い合わせフォーム: SPDT（単極双投）
- 現在の評価: 15 Amps
- 巻tage評価： 480VAC
- ターミナルの種類： スクリュー
- ハウジング材質: プラスチック
- 国際保護等級: IP65
4. セットアップとインストール
Follow these steps for proper installation of the Omron Z-15GW2-B7-K snap switch:
- 電源切断: 設置を始める前に、回路へのすべての電源が切断されていることを確認してください。ボリュームで確認してください。tageテスター。
- 取り付け: The switch is designed for snap-in mounting. Secure the switch using the mounting dimensions of 1.03 inches centers. Ensure the mounting surface is stable and free from excessive vibration.
- 配線：
- Identify the screw terminals. The SPDT contact form typically includes Common (C), Normally Open (NO), and Normally Closed (NC) terminals. Refer to the wiring diagram on the switch body if available.
- Connect the appropriate wires to the screw terminals. Ensure connections are tight and secure to prevent loose contacts and overheating.
- Use wire gauges suitable for the 15A current rating.
- アクチュエータのアライメント: Position the hinge roller lever actuator so that it can be reliably engaged by the target mechanism. Ensure the mechanism provides sufficient over travel (0.157 In.) and does not exceed the maximum pretravel (0.157 In.) for consistent operation.
- 環境への配慮: Install the switch in an environment within its specified operating temperature range (-25°C to 80°C) and where its IP65 rating is sufficient for protection against dust and water ingress.
- テスト: After installation, carefully restore power and test the switch's operation to confirm correct functionality and wiring.
5. 操作手順
The Omron Z-15GW2-B7-K snap switch operates based on the physical displacement of its hinge roller lever actuator. When the actuator is depressed, the internal contacts switch state.
- 作動: The switch requires an operating force of approximately 3.5 oz. to actuate. The hinge roller lever is designed to be engaged by a moving part of machinery or equipment.
- Contact Function (SPDT):
- In its normal (unactuated) state, the Common (C) terminal is connected to the Normally Closed (NC) terminal.
- When the hinge roller lever is depressed, the Common (C) terminal switches connection to the Normally Open (NO) terminal.
- The switch maintains this state as long as the actuator is depressed. Upon release, the contacts return to their normal state.
- 動作モード: The switch functions in an OFF-NONE-ON mode, meaning it has a stable OFF state, a transient ON state when actuated, and returns to OFF when released.
6. メンテナンス
Regular maintenance helps ensure the longevity and reliable performance of your Omron snap switch.
- 検査： Periodically inspect the switch for any signs of physical damage, wear on the hinge roller lever, or loose wiring connections.
- クリーニング： Keep the switch free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- アクチュエータチェック: Verify that the mechanism actuating the hinge roller lever is operating smoothly and consistently, without excessive force or misalignment.
- 環境保護: Ensure that the environmental conditions remain within the specified IP65 rating. If the housing is damaged, the protection level may be compromised.
- 電源切断: メンテナンスや点検を行う前には必ず電源を切ってください。
7。 トラブルシューティング
If you encounter issues with your Omron Z-15GW2-B7-K snap switch, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Switch does not actuate when lever is pressed. |
|
|
| No electrical contact change when switch actuates. |
|
|
| スイッチは断続的に動作します。 |
|
|
If problems persist after attempting these solutions, contact Omron technical support or a qualified electrician.
8. 仕様
Technical specifications for the Omron Z-15GW2-B7-K Industrial Snap Switch:
| パラメータ | 価値 |
|---|---|
| モデル番号 | Z-15GW2-B7-K |
| シリーズ | Z |
| アクチュエータタイプ | Hinge Roller Lever |
| お問い合わせフォーム | SPDT（単極双投） |
| 現在の評価 | 15 Amps |
| 巻tage評価 | 480VAC |
| 操作モード | オフ-なし-オン |
| 端末タイプ | スクリュー |
| 操作力 | 3.5オンス |
| Max. Pretravel | 0.157インチ |
| Release Force | 0.79オンス |
| ディファレンシャルトラベル | 0.040インチ |
| 旅行中 | 0.157インチ |
| 長さ | 1.94 In. (Product Dimensions: 2.5 inches) |
| 身長 | 1.16 In. (Product Dimensions: 1.8 inches) |
| 深さ | 0.69 In. (Product Dimensions: 0.6 inches) |
| 取付寸法 | 1.03 In. Centers |
| 動作温度範囲 | -25°C ～ 80°C |
| ハウジング材質 | プラスチック |
| 連絡先 | 銅、真鍮 |
| 国際保護格付け | IP65 |
| アイテム重量 | 0.01オンス |
9. 保証とサポート
For warranty information and technical support regarding your Omron Z-15GW2-B7-K Industrial Snap Switch, please refer to the official Omron website or contact your authorized Omron distributor. Keep your purchase receipt for warranty claims.
オムロン Webサイト： オムロン
For specific product inquiries or troubleshooting assistance not covered in this manual, Omron's customer service team is available to help.
