1. はじめに
ご購入ありがとうございますasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your amplifier。
2. 安全情報
- 電源: Use only the specified power adapter (18V DC, center negative).
- 換気： 過熱を防ぐために適切な換気を確保してください。通気口を塞がないでください。
- 水分： ユニットを雨、湿気、または過度の湿度にさらさないでください。
- 取り扱い： 丁寧に取り扱ってください。落としたり、強い衝撃を与えたりしないでください。
- サービス: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.
- スピーカー接続: 常に接続します amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3.製品オーバーview
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
フロントパネルコントロール
- 入力： 1/4" mono jack to plug in your guitar.
- ベース： Controls the low frequency response.
- 真ん中： Controls the mid frequency response.
- 高音： Controls the high frequency response.
- 利得： Controls the gain level.
- ボリューム： 出力音量を制御します。
- オン/オフスイッチ： ユニットの電源をオンまたはオフにします。
背面パネルの接続
- 18V DC： Plug in DC 18V adapter (center negative).
- 電話/回線出力: 1/8" stereo jack, for using headphones or recording.
- AUX入力： 1/8" stereo jack, for connecting an external music player.
- FXループリターン: 1/4" mono jack, connect to your effects output jack.
- スピーカー出力: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- FXループセンド: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp そして力 amp).
4. セットアップ
- スピーカーキャビネットを接続します: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the amplifier。
- 接続電源： Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- ギターを接続する: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- 初期設定： Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- 電源オン: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.
5. 操作手順
- トーンの調整: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- ゲインの調整: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- 音量の調整: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp セクション。
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- AUX入力： Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. メンテナンス
- クリーニング： 柔らかく乾いた布で拭いてください。 amp洗浄機の外装。液体洗剤や溶剤は使用しないでください。
- ストレージ： 保存する amp直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。
- チューブケア: As a hybrid ampリファイアー、プリamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 音が出ない | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| 音が弱い、または歪んでいる | Faulty cable, incorrect impedance, worn preamp チューブ。 | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | グランドループ、電源障害、他の電子機器からの干渉。 | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. 仕様
- 出力ワットtage: 5ワット
- 電源: コード式電気（18V DC、センターマイナス）
- 商品の重量: 15.5オンス
- 製品寸法: 2.34 x 5.03 x 2.95インチ
- 対応デバイス: ギター
- コネクタタイプ: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- スピーカーインピーダンス: 4-16オーム
- モデル番号: TANLA2
9. 製品ビデオ
OriPure 5W Tube Guitar Ampライフヘッド
ビデオの説明: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
ビデオの説明: このビデオでは、view and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
ビデオの説明: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
常陽メテオIIバンTamp XLシリーズミニ Amp Head 20 Watt
ビデオの説明: This video presents the JOYO Meteor II BanTamp XLシリーズミニ Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
ビデオの説明: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
ビデオの説明: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. 保証とサポート
保証情報およびテクニカルサポートについては、Hotoneの公式ウェブサイトをご覧ください。 webご購入の際は、サイトをご覧いただくか、正規販売店にお問い合わせください。購入証明書として領収書を保管してください。