1. はじめに
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Virutex SRI174T Incision Saw. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
1.1 安全情報
火災、感電、および人身傷害のリスクを軽減するため、常に基本的な安全上の注意事項を守ってください。このマニュアルは、今後の参考のために保管してください。
- 安全メガネ、聴覚保護具、手袋などの適切な個人用保護具 (PPE) を着用してください。
- 作業エリアが清潔で、明るく、障害物がないことを確認してください。
- のこぎりの操作中は、子供や傍観者を遠ざけてください。
- Disconnect the saw from the power supply before making any adjustments, changing accessories, or performing maintenance.
- 切断する材料に適したのこぎりの刃を使用してください。
- Never force the tool; let the saw blade do the work.
2.製品オーバーview
The Virutex SRI174T is a powerful 1150W circular saw designed for precise incision cuts in various materials, including wood and plastic. Its ergonomic design and advanced features ensure user comfort and operational safety.
Figure 2.1: Virutex SRI174T Incision Saw. This image shows the overall design of the saw, highlighting its compact and ergonomic form factor.
2.1 主な特徴
- Solid and Ergonomic Design: Provides comfortable handling and control.
- Rail Compatibility: The saw slides directly on guide rails without the need for intermediate accessories (guide rails sold separately).
- 強力なモーター: 1150W motor suitable for cutting various materials.
- Automatic Disconnection System: Protects the tool in case of overvoltage.
- Soft Start Motor: Prevents sudden jolts upon startup.
- クイックストップ: Rapidly stops the saw blade for enhanced safety.
- Non-slip Rear Handle (Soft Grip): Improves grip and reduces fatigue.
- ロックレバー: Simplifies saw blade changes and divider knife adjustments.
- Vacuum Cleaner Socket: Allows connection to an external vacuum cleaner for dust extraction.
2.2 含まれるコンポーネント
- Virutex SRI174T Incision Saw
- MD Saw Blade (Ø 160 mm, 28 teeth) for wood and plastic
- 吸引ノズル
- キャリングケース
- サービスキー
3. セットアップ
3.1 ブレードの取り付けと取り外し
- Ensure the saw is disconnected from the power supply.
- Locate the locking lever (refer to Figure 2.1 for general location). Engage the locking lever to secure the saw blade.
- Using the provided service keys, loosen the blade retaining screw.
- 古い刃を慎重に取り外します。
- 新しいブレードを取り付け、回転方向がのこぎりの矢印と一致していることを確認します。
- Tighten the blade retaining screw securely. Disengage the locking lever.
3.2 Connecting to a Vacuum Cleaner
For a cleaner work environment and improved visibility, connect an external vacuum cleaner to the saw's suction nozzle. Ensure the vacuum cleaner hose is securely attached to prevent accidental disconnection during operation.
3.3オプションのアクセサリ
For enhanced precision and versatility, consider using optional accessories such as guide rails (e.g., UCP174T 800 mm or 1400 mm), jointing sets, vacuum pads, or clamping screws. Refer to the accessory documentation for installation and usage instructions.
4. 操作
4.1電源接続
Connect the saw to a suitable power outlet (230 Volts AC). The soft start feature will ensure a smooth power-up.
4.2 切削深さの調整
The cutting depth can be adjusted to suit the material thickness. The saw offers a maximum cutting depth of 55 mm at 90° and 35 mm at 45°. Refer to the saw's depth adjustment mechanism for precise settings.
4.3 Basic Cutting Procedure
- 切断中にワークが動かないようにしっかりと固定します。
- Set the desired cutting depth and angle.
- 作業を始める前に、鋸をワークピースの上に置き、刃が材料に触れていないことを確認します。
- Start the saw. Allow the blade to reach full speed before engaging with the material.
- Guide the saw smoothly and steadily through the material. Do not force the saw.
- Once the cut is complete, release the trigger and allow the blade to come to a complete stop using the quick stop feature before lifting the saw from the workpiece.
5. メンテナンス
5.1 クリーニング
Regularly clean the saw, especially the blade guard, motor vents, and suction nozzle, to ensure optimal performance and prevent overheating. Use a dry cloth or compressed air. Do not use solvents or abrasive cleaners.
5.2 刃の手入れ
Inspect the saw blade before each use for sharpness, cracks, or damage. A dull or damaged blade can cause kickback and reduce cutting efficiency. Replace worn blades promptly following the procedure in Section 3.1.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| のこぎりが起動しない | No power supply; Faulty power cord/plug; Overvoltage保護がアクティブ化されました | Check power connection; Inspect cord/plug for damage; Disconnect and reconnect power to reset overvoltage保護。 |
| 切断性能の低下 | Dull or incorrect blade; Accumulation of sawdust; Incorrect cutting depth | Replace blade or use appropriate blade for material; Clean saw and suction nozzle; Adjust cutting depth. |
| 過度の振動 | Damaged or improperly installed blade; Loose components | Inspect and correctly install blade; Check all fasteners for tightness. |
If you encounter issues not listed here or if solutions do not resolve the problem, contact Virutex customer support or a qualified service technician.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル | SRI174T |
| 力 | 1150ワット |
| 巻tage | 230ボルトAC |
| 鋸刃直径 | 160ミリメートル |
| 鋸刃の穴 | 20ミリメートル |
| 歯数（刃を含む） | 28 |
| 90°での切削深さ | 55ミリメートル |
| 45°での切削深さ | 35ミリメートル |
| 無負荷速度 | 5500回転 |
| 重さ | 4.7 Kg (approx. 10.36 lbs) |
| ブレード材質 | 高速度鋼 |
| 表面の推奨事項 | プラスチック、木材 |
| ハンドル材質 | ゴム |
| 製品寸法（長さ x 幅 x 高さ） | 13.9インチ x 12.7インチ x 13.9インチ |
8. 保証とサポート
For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Virutex webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。
For further assistance, you may contact Virutex customer service through their official channels.
