導入
The Orbit 94148 Buddy II is a battery-operated watering timer designed to automate your garden irrigation system. This device connects to your outdoor faucet and allows you to program watering schedules for two independent outlets, providing flexibility for various watering needs such as micro-jets, drip systems, and garden sprinklers.
安全情報
- 屋外専用です。
- 冷水のみでご使用ください。
- Do not submerge the timer in water.
- Protect from freezing temperatures to prevent damage.
パッケージ内容
The Orbit 94148 Buddy II watering timer package includes:
- One Orbit 94148 Buddy II Two-Outlet Watering Timer.
- ユーザーマニュアル（この文書）。
注記： AA batteries are required for operation and are not included in the package.
設定
Follow these steps to set up your Orbit 94148 Buddy II watering timer:
- バッテリーの取り付け： Open the battery compartment and insert the required AA batteries (not included). Ensure correct polarity.
- 蛇口に接続: Securely attach the timer to your outdoor faucet. Hand-tighten only to prevent damage.
- ホースを接続する: Attach your garden hoses or irrigation lines to the two independent outlets on the timer.
操作手順
The Orbit 94148 Buddy II offers both automatic programming and manual watering options.
自動プログラミング
To program the timer for automatic watering:
- 現在の時刻を設定: Use the dial to set the current time of day.
- 開始時刻の設定: Choose the desired time for watering to begin.
- 散水時間の設定: Select the length of each watering cycle, ranging from 1 to 240 minutes.
- 周波数の設定: Determine how often watering occurs. Options include every 6 hours, every 12 hours, or daily intervals from 1 to 7 days.
- 自動モードを有効にする: Turn the dial to the "Auto" position to enable the programmed watering schedule.
Each of the two outlets can be programmed independently, allowing for different watering schedules for separate areas of your garden.
手動散水
To manually water without affecting your programmed schedule:
- Turn the dial to the "Manual" position.
- Select the desired watering duration.
- The water will flow for the selected duration and then automatically shut off.
- To stop manual watering early, turn the dial back to the "Off" or "Auto" position.
メンテナンス
Regular maintenance ensures optimal performance and longevity of your watering timer.
- バッテリー交換: When the battery indicator shows low power, replace the AA batteries promptly. Always use fresh batteries.
- クリーニング： Periodically check the filter washer at the faucet connection for debris and clean if necessary to maintain proper water flow.
- 冬季： Before the first frost, disconnect the timer from the faucet, remove batteries, and store the unit indoors in a dry, protected area to prevent freeze damage.
トラブルシューティング
If you encounter issues with your watering timer, consider the following:
- 水流なし:
- 蛇口が完全に開いているか確認してください。
- 電池が正しく取り付けられており、十分な電力があることを確認してください。
- Verify that the timer is set to "Auto" or a manual watering cycle is active.
- Inspect the filter washer for clogs.
- Timer Not Programming:
- Confirm batteries are fresh and properly inserted.
- Ensure the dial is firmly clicked into each setting position during programming.
- 漏れ:
- すべての接続が締まっていることを確認してください。
- Ensure rubber washers are properly seated at all connection points.
- Do not overtighten connections, as this can damage washers.
仕様
| モデル番号 | 94148 |
| 寸法（長さ×幅×高さ） | 12 x 18.5 x 20 cm |
| 重さ | 460グラム |
| 電源 | 単三電池（別売） |
| 材料 | 樹脂 |
| 設定数 | 10 |
| 色 | 緑 |
| メーカー | オービット・イリゲーション・プロダクツ社 |
保証とサポート
The Orbit 94148 Buddy II Battery-Operated Two-Outlet Watering Timer comes with a 2年間保証 購入日から。この保証は通常の使用における材料および製造上の欠陥をカバーします。
For warranty claims or technical support, please refer to the contact information provided on the product packaging or the official Orbit webサイト。
