CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

導入

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

重要な安全情報

火災、感電、および人身傷害のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。

パッケージ内容

Your CLOVER D1-K water cooler package includes:

仕様

モデルD1-K
製品タイプHot and Cold Countertop Bottleless Water Dispenser
製品寸法幅10.7インチ x 奥行き16.8インチ x 高さ17.2インチ
製品重量Net: 26 lbs, Gross: 31 lbs
製品の色ブラックとシルバー
電気110Vコンセント
冷媒タイプR134a
コンプレッサータイプLG
認定資格UL
水温熱と冷たさ
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water Thermostat32°Fから50°Fまで調節可能
温水サーモスタットControlled to 185°F
Built-In Filtration Systemはい
フィルター寿命750 gallons or 12 months
エネルギースター認定はい

設定

1.配置

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. 水道管の接続

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

内部 view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

操作手順

1. 水の供給

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

フロント view of the Clover D1-K water cooler with hot and cold water faucets
図3: 前面 view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

メンテナンス

1. 清掃

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp 布。

2. フィルターの交換

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

トラブルシューティング

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

保証

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 部品の1年間保証 そして コンプレッサーの3年間保証 ご購入日から1年間有効です。保証請求の際は、購入証明書を保管してください。本保証は、通常の使用における材料および製造上の欠陥を対象としています。

サポート

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER webサイト。

関連文書 - D1-K

前view Clover POSシステムガイド:ソフトウェアプラン、セットアップ、トラブルシューティング
Clover POS システムの包括的なガイド。ソフトウェア プランの詳細、デバイスのセットアップ、サードパーティ アプリの統合、一般的な問題のトラブルシューティング、ビジネス オペレーションの管理などを網羅しています。
前view Clover P2PE 実装マニュアル v5.0: 安全な決済処理ガイド
このマニュアルでは、Cloverのポイントツーポイント暗号化(P2PE)ソリューションの実装手順について詳しく説明します。Clover決済端末の承認済みデバイス、インストール、セキュリティプロトコル、トラブルシューティングについて解説します。
前view Clover P2PE実装マニュアル: 安全な決済デバイスのセットアップとセキュリティ
このマニュアルでは、Clover の Point-to-Point 暗号化 (P2PE) ソリューションを実装するための詳細な手順を示し、Clover 決済端末のデバイス設定、セキュリティ プロトコル、トラブルシューティングについて説明します。
前view Clover P2PE実装マニュアル:安全な決済処理ガイド
このマニュアルでは、Clover Mobile、Mini、Flex デバイスの Point-to-Point 暗号化 (P2PE) の実装について詳細に説明し、安全な支払いトランザクションのためのセットアップ、セキュリティ、PCI コンプライアンスを網羅しています。
前view Clover Mobile インストールガイド: セットアップ、アクティベーション、トランザクション
Clover Mobileデバイスを決済処理用にセットアップ、アクティベーション、使用する方法を網羅したガイドです。ハードウェアのセットアップ、ネットワーク接続、アプリのインストール、PIN管理、プリンターのペアリング、取引処理について解説しています。
前view Clover Mini 3 POSシステムの仕様と機能
コンパクトなカウンタートップ型スマートPOSシステム「Clover Mini 3」の詳細な仕様と機能。Clover Mini 2との比較、接続オプション、アクセサリ、決済フローなどを掲載。