Seiko NR434M Pyxis Analog Alarm Clock User Manual

導入

Thank you for choosing the Seiko NR434M Pyxis Analog Alarm Clock. This clock is designed to provide a pleasant waking experience with its natural bird sounds and clear analog display. Please read this manual carefully to ensure proper setup and operation of your new alarm clock.

安全情報

• 時計を極端な温度、直射日光、高湿度にさらさないでください。
• 時計を落としたり、強い衝撃を与えたりしないでください。
• Use only the specified battery type (AA alkaline batteries x 3).
• 長期間時計を使用しない場合は、液漏れを防ぐため電池を取り外してください。
• 使用済みバッテリーは、地域の規制に従って廃棄してください。

パッケージ内容

• Seiko NR434M Pyxis Analog Alarm Clock Unit
• 単3アルカリ電池（XNUMX本）

製品終了view

The Seiko NR434M features a house-shaped design with an analog clock face and a chimney-like button on top. The back of the clock houses all control dials and switches for setting time, alarm, volume, and alarm sound type.

画像: 正面 view of the Seiko NR434M Pyxis Analog Alarm Clock, showing the green house-shaped casing and the white analog clock face with black numbers.

設定

1. バッテリーの取り付け

1. 時計の背面にある電池ケースのカバーを見つけます。
2. カバーを下方向にスライドさせて開きます。
3. Insert three (3) AA alkaline batteries, ensuring correct polarity (+/-).
4. 電池ボックスのカバーを、カチッと音がするまで上方にスライドさせて元に戻します。

2.時間を設定する

1. On the back of the clock, locate the "TIME" knob.
2. Rotate the "TIME" knob in either direction to move the hour and minute hands to the current time.

3.アラームの設定

1. On the back of the clock, locate the "ALARM" knob.
2. Rotate the "ALARM" knob to set the alarm hand to your desired wake-up time.

画像: 裏面 view of the Seiko NR434M Pyxis Analog Alarm Clock, highlighting the volume control dial, alarm sound selector switch (A/B/Electronic), time setting knob, and alarm setting knob.

操作手順

1. Alarm Sound Selection

The clock offers three alarm sound options:

• Bird A: Features a combination of Cucoon, Lurivitaki, and Komadori bird sounds.
• Bird B: Features a combination of Sankoo and Oolli Aogi bird sounds.
• Electronic Sound: A traditional electronic beep alarm.

To select an alarm sound, use the switch labeled "A / B / ((()))" on the back of the clock. Slide the switch to your preferred setting.

2. 音量コントロール

Adjust the alarm volume using the "VOL." dial on the back of the clock. Rotate the dial towards "MAX" for louder volume or "MIN" for softer volume.

3. アラームのオン/オフ

Use the ON/OFF switch located on the left side of the clock's back panel to activate or deactivate the alarm function.

4. Snooze Function and Illumination

The white chimney-like button on top of the clock serves two functions:

• スヌーズ： When the alarm sounds, press the chimney button to activate the snooze function. The alarm will pause and sound again after approximately 5 minutes.
• 照明： Press the chimney button at any time to briefly illuminate the clock face for easy view暗闇の中で。

メンテナンス

クリーニング

時計は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤、溶剤、化学薬品スプレーは使用しないでください。表面仕上げや内部部品を損傷する恐れがあります。

バッテリー交換

Replace all three AA batteries when the clock's display dims, the alarm sound weakens, or the clock stops functioning. Always replace all batteries at the same time with new ones.

トラブルシューティング

• Clock not working / Alarm not sounding:
  Check if the batteries are inserted correctly and are not depleted. Ensure the alarm ON/OFF switch is in the "ON" position.
• Alarm sound is too quiet or too loud:
  Adjust the "VOL." dial on the back of the clock to your desired level.
• 時間が不正確です:
  Ensure the batteries are fresh. Quartz movements are generally accurate, but extreme conditions can affect performance.

仕様

Image: The Seiko NR434M Pyxis Analog Alarm Clock shown next to a hand for size comparison, indicating its compact dimensions of approximately 4.4 inches (11 cm) in height.

保証とサポート

Seiko products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official SEIKO webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。