導入
The KEF X300A powered speaker system is designed to elevate your digital audio experience. It connects seamlessly to your PC or Mac via a distortion-free USB connection, delivering exceptional warmth, detail, and depth to your music library. The system also supports analog auxiliary input for devices with a headphone port, such as smartphones or tablets.
Each X300A speaker features two dedicated Class AB audiophile amplifiers, one for low/mid frequencies and another for high frequencies, ensuring accurate and distortion-free sound reproduction. Dual digital audio converters (DACs) minimize interference and digital artifacts. Toroidal transformers, typically found in high-end audiophile amplifiers, are integrated to eliminate speaker hum and electromagnetic interference, providing a clean audio signal.
箱の中身
- Two (2) KEF X300A Digital Hi-Fi Speakers
セットアップと接続
Setting up your KEF X300A speakers is straightforward, requiring minimal effort. No complex software installation or intricate programming is needed.
- 電源接続: Plug both speakers into a reliable power source using their respective power cords.
- スピーカー相互接続: Connect the two speakers to each other using the provided USB cable. This establishes the digital audio link between the left and right channels.
- オーディオソースの接続: Connect your audio player (PC, Mac, iPhone, iPad, Kindle Fire, etc.) to the speakers.
- For optimal digital audio quality, connect your computer via the USB input. The X300A features high-resolution 96kHz/24-bit USB input.
- For other devices, use an 1/8" (3.5mm) analog auxiliary cable to connect to the auxiliary input port.
- 電源オン: Flip the power switch on the speakers.
Video Guide: KEF X300A Digital Hi-Fi System Overview
このビデオでは、view of the KEF X300A Digital Hi-Fi Speaker System, highlighting its features and ease of setup.
主な特徴
- ハイレゾオーディオ: With 96kHz/24-bit USB input and digitally connected hi-fi speakers, the X300A delivers music with the warmth, depth, and detail of the original recording.
- デュアル Amplification： Each X300A speaker is equipped with two dedicated Class AB amplifiers—one for low/mid frequencies and one for high frequencies—ensuring accurate, distortion-free sound reproduction across the entire frequency range.
- Integrated DACs: A high-quality Digital-to-Analog Converter (DAC) in each speaker virtually eliminates interference, contributing to a clean and precise audio output.
- Uni-Qドライバーアレイ： The speakers feature the award-winning Uni-Q 'point source' driver array, derived from KEF's flagship Blade speaker. This design creates a spacious, accurate, and exquisitely detailed sound field, regardless of the connected device.
- Toroidal Transformers: Incorporating toroidal transformers, common in top audiophile amplifiers, the X300A effectively nullifies speaker hum and electromagnetic interference, preserving audio purity.
操作手順
Once connected, the KEF X300A speakers are ready for use. You can fine-tune the audio output to match your listening environment and preferences.
- Gain and Audio Balance: Adjust the gain and audio balance using the two knobs located on the back of each speaker. This allows for precise control over individual speaker output and stereo imaging.
- 低音レベル調整: The X300A includes a built-in switch that allows you to adjust the bass response. This feature is crucial for optimizing sound quality based on speaker placement, whether they are on a surface (e.g., a desk) or on dedicated speaker stands. Press the button to toggle between modes to best suit your listening space.
メンテナンス
To ensure the longevity and optimal performance of your KEF X300A speakers, follow these general maintenance guidelines:
- クリーニング： Gently wipe the speaker cabinets with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish.
- 配置: Position the speakers in a stable location, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the speakers.
- 保護： Protect the speaker drivers from physical damage. Avoid touching the cones or tweeters.
- ケーブル： すべてのケーブル接続が安全で損傷がないことを定期的に確認してください。
トラブルシューティング
If you encounter issues with your KEF X300A speaker system, consider the following common troubleshooting steps:
- 音が出ない:
- Ensure both speakers are properly plugged into a power source and the power switches are on.
- Verify that the USB cable connecting the two speakers is securely attached.
- Check the audio source connection (USB or auxiliary) and ensure the source device is playing audio.
- Confirm that the volume on both the speakers and the audio source device is turned up and not muted.
- 歪んだ音:
- スピーカーとオーディオソースの両方の音量を下げます。
- ケーブル接続が緩んでいないか確認してください。
- オーディオ ソースが過剰な信号を送信していないことを確認します。
- 音の不均一性（左/右）:
- Adjust the individual gain knobs on the back of each speaker to balance the output.
- ソースデバイスのオーディオバランス設定を確認してください。
- ハミング音またはブザー音:
- すべてのケーブルが適切にシールドされており、電源ケーブルと平行になっていないことを確認します。
- Try plugging the speakers into a different power outlet or a surge protector.
- Verify that the toroidal transformers are functioning correctly (this may require professional inspection).
If problems persist, consult the KEF support webさらにサポートが必要な場合は、サイトをご覧いただくか、カスタマー サービスにお問い合わせください。
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ケフ |
| モデル番号 | X300A |
| 製品寸法 | 11 x 10 x 7インチ |
| アイテム重量 | 38 ポンド |
| スピーカー最大出力 | 150ワット |
| 接続技術 | 補助、USB |
| オーディオ出力モード | ステレオ |
| 取り付けタイプ | プラグマウント |
| 初回利用可能日 | 2年2013月XNUMX日 |
保証とサポート
The KEF X300A Digital Hi-Fi Speaker System is sold as is, and the manufacturer's warranty applies. For specific warranty terms, conditions, and support inquiries, please refer to the documentation included with your product or visit the official KEF webサイト。
法的免責事項: Product sold as is. Manufacturers warrantee applies.
