TC Electronic Flashback X4 Guitar Delay Effects Pedal User Manual

導入

The TC Electronic Flashback X4 is a versatile guitar delay effects pedal designed to provide a wide range of delay types, looping capabilities, and advanced tone-shaping options. This manual will guide you through its features, setup, and operation to help you get the most out of your pedal.

安全情報

• ユニットを雨や湿気にさらさないでください。
• ラジエーター、暖房送風口、ストーブ、その他熱を発生する装置などの熱源の近くでは使用しないでください。
• メーカー指定のアタッチメント/アクセサリのみを使用してください。
• すべてのメンテナンスは資格のあるサービス担当者に依頼してください。

パッケージ内容

Ensure all items are present in your Flashback X4 package:

• TC Electronic Flashback X4 Delay Effects Pedal
• Power Supply (9V DC, 300mA)
• USBケーブル
• ユーザーマニュアル（このドキュメント）

コントロールと接続

The Flashback X4 features a comprehensive set of controls and input/output options for maximum flexibility.

トップパネルコントロール

画像の説明: トップダウン view of the blue TC Electronic Flashback X4 pedal, showing five black rotary knobs and four footswitches. The knobs are labeled "TONEPRINT", "DELAY TIME", "FEEDBACK", "DELAY LEVEL", and "LOOPER LEVEL". The footswitches are labeled "REC (A)", "PLAY/PAUSE (B)", "ONCE (C)", and "UNDO/REDO (TAP)".

• TONEPRINT Knob: Selects between 16 delay types including Tape, Tube, Space, Analog, Analog w/Mod, Reverse, Dynamic, 2290, 2290 w/Mod, Slap, LoFi, Ping Pong, and three TonePrint slots.
• DELAY TIME Knob: 遅延時間を調整します。
• フィードバックノブ： 遅延の繰り返し回数を制御します。
• DELAY LEVEL Knob: Sets the volume of the delayed signal.
• LOOPER LEVEL Knob: ルーパー再生の音量を調整します。
• REC (A) Footswitch: Engages/disengages recording for the looper.
• PLAY/PAUSE (B) Footswitch: Starts/pauses looper playback.
• ONCE (C) Footswitch: Plays the loop once.
• UNDO/REDO (TAP) Footswitch: Tap tempo functionality and undo/redo for looper.

背面パネルの接続

Image description: A rear view of the blue TC Electronic Flashback X4 pedal, showing various input and output jacks. From left to right: Mono/Stereo Input jacks, Mono/Stereo Output jacks, EXP Pedal input, 9V DC power input, USB port, MIDI IN, and MIDI THRU ports.

• INPUT (MONO/STEREO): Connect your guitar or other audio source. Supports mono or stereo input.
• OUTPUT (MONO/STEREO): 接続する amplifier or other audio equipment. Supports mono or stereo output.
• EXP PEDAL: Connect an expression pedal for real-time control over parameters.
• 9V DC/300mA: 付属の電源装置の電源入力。
• USB： Connect to a computer for TonePrint editing and firmware updates.
• MIDI IN/THRU: MIDI connectivity for advanced control and synchronization.
• BYPASS Switch (BUFFER/TRUE): Select between buffered bypass (maintains signal integrity over long cable runs) and true bypass (completely removes the pedal from the signal path when off).
• KILL DRY Switch (ON/OFF): Removes the dry signal from the output, useful for parallel effects loops.

設定

電源接続

Connect the included 9V DC power supply to the 9V DC/300mA input jack on the rear panel.

オーディオ接続

モノセットアップ

• Connect your guitar to the MONO INPUT jack.
• Connect the MONO OUTPUT jack to your amplifier。

ステレオセットアップ

• Connect your stereo source to both INPUT jacks (left and right).
• Connect both OUTPUT jacks (left and right) to your stereo ampリファーのセットアップ。

USB接続

For TonePrint editing or firmware updates, connect the USB cable from the pedal to your computer.

Operating the Flashback X4

Selecting Delay Types

Rotate the TONEPRINT knob to select from the 16 available delay types. Each type offers a unique sonic character.

Adjusting Delay Parameters

Use the DELAY TIME, FEEDBACK, and DELAY LEVEL knobs to fine-tune your desired delay sound. Experiment with these controls to create subtle echoes, long ambient trails, or rhythmic repeats.

タップテンポ

The UNDO/REDO (TAP) footswitch allows you to set the delay time by tapping your foot. Tap at least twice to set the tempo.

ルーパー機能

The Flashback X4 includes a 40-second looper.

• 記録： Press the REC (A) footswitch to start recording.
• 再生/停止: Press the PLAY/PAUSE (B) footswitch to play or stop the loop.
• オーバーダブ： While playing, press REC (A) again to overdub.
• 元に戻す/やり直し: Press the UNDO/REDO (TAP) footswitch to undo or redo the last overdub.
• Play Once: Press the ONCE (C) footswitch to play the loop once.

TonePrint Feature

TonePrint allows you to load custom-tuned effects created by famous guitarists directly into your pedal.

• USB経由: Connect the pedal to your computer and use the TonePrint Editor software to load custom TonePrints.
• スマートフォンアプリ経由: Download the TC Electronic TonePrint App. Select a TonePrint and "beam" it to your pedal by holding your smartphone's speaker near your guitar's pickup.

Official Product Video: Flashback X4 Delay & Looper - 5 Things to Know

このビデオでは、view of the TC Electronic Flashback X4 Delay & Looper pedal, highlighting its key features such as amazing sounds, instant access to 3 presets, TonePrint technology, tap tempo, and ease of use. It demonstrates how to load TonePrints via USB or smartphone app.

メンテナンス

• ペダルを清潔に保つには、柔らかく乾いた布で拭いてください。
• Avoid exposing the pedal to extreme temperatures or humidity.
• 長期間使用しない場合は電源を切ってください。

トラブルシューティング

• 音が出ない: Check all cable connections, ensure the power supply is connected and working, and verify that the pedal is engaged.
• Weak/Distorted Sound: ギターをチェックして amplifier volume levels. Ensure correct input/output impedance.
• ルーパーの問題: Ensure sufficient power. Refer to the detailed looper instructions in the full manual for specific recording/playback issues.
• TonePrint Not Loading: Verify USB connection or ensure the smartphone speaker is close to the guitar pickup. Check app/software for updates.

仕様

保証とサポート

For warranty information, technical support, or further assistance, please visit the official TC Electronic webサイトにアクセスするか、カスタマーサービスにお問い合わせください。

TCエレクトロニック公式ストア: Visit the TC Electronic Store