VOLTCRAFT エネルギーロガー 4000 F 取扱説明書

1. はじめに

The VOLTCRAFT Energie Logger 4000 F is a sophisticated device designed to measure and record electricity consumption. It allows users to monitor power usage for up to six months on its internal memory. Data can be easily transferred to a computer via an SDHC card (not included) for detailed analysis and storage. This enables identification of high-consumption appliances and supports efficient energy-saving measures. The device provides highly accurate readings, even for standby consumption, starting from 0.1 Watt.

2. 安全に関する注意事項

• デバイスを操作する前に、このマニュアルをよくお読みください。
• Ensure the device is used only with compatible power outlets and within specified voltage/電流制限。
• デバイスを開けないでくださいasing, except for battery replacement as instructed.
• デバイスを水、湿気、極端な温度から遠ざけてください。
• デバイスが破損していると思われる場合は使用しないでください。
• 電池とデバイスは地域の規制に従って廃棄してください。

3. パッケージ内容

• VOLTCRAFT Energie Logger 4000 F
• 取扱説明書
• Note: An SDHC card is required for data transfer and is not included.

4.製品オーバーview

The Energie Logger 4000 F features a clear 3-line display and intuitive controls for monitoring energy parameters. It integrates directly into a power outlet, allowing for easy connection of appliances.

図1: フロント view of the VOLTCRAFT Energie Logger 4000 F, showing the integrated socket, the digital display, and control buttons. The display typically shows real-time measurements such as voltage (V), current (A), and frequency (Hz).

4.1 ディスプレイ

The 3-line display shows various electrical parameters, including:

• 現在の消費電力
• Apparent and effective power
• CosPhi factor
• Intensity (current)
• 巻tage
• 頻度
• Minimum and maximum values recorded

4.2 コントロール

The device features buttons for navigation and mode selection:

• モード： To switch between different display modes and settings.
• 最大/最小： に view recorded maximum and minimum values.
• 矢印ボタン: For navigating menus or adjusting settings.

5. セットアップ

5.1 バッテリーの取り付け

The device includes an integrated backup battery (3V CR1620) to retain measured data during power outages. To access the battery compartment, you may need a precision screwdriver to remove small screws. Ensure correct polarity when inserting the battery.

5.2 SDHC Card Insertion

For data logging and transfer, an SDHC card (not supplied) is required. Locate the SDHC card slot on the device and insert the card gently until it clicks into place. Ensure the card is inserted in the correct orientation.

5.3 初期接続

1. Plug the Energie Logger 4000 F into a standard wall socket.
2. Connect the appliance you wish to monitor into the socket on the Energie Logger.
3. The display will illuminate, showing initial readings.

6. 操作手順

6.1 Monitoring Energy Consumption

Once connected, the device automatically begins monitoring the power consumption of the attached appliance. The 3-line display provides real-time data.

6.2表示モード

を押す モード button to cycle through different display screens. These screens may include:

• Real-time Measurement: Shows instantaneous values for voltage、電流、電力など。
• Cumulative Measurement: Displays total energy consumed over time.
• Cost Forecast: Provides estimated monthly or yearly costs based on current consumption patterns.
• 最小/最大値: Shows the lowest and highest recorded values for various parameters.

6.3 View履歴データ

The device can display the consumption and daily expenses for the past 9 days directly on its screen. Use the arrow buttons to navigate through these historical records.

6.4 Determining Operating Time

The Energie Logger 4000 F also tracks and displays the total operating duration of the connected appliance.

6.5 Measuring Standby Consumption

With its high accuracy down to 0.1 Watt, the device is ideal for precisely measuring the low power consumption of appliances in standby mode.

7. データ転送と分析

The Energie Logger 4000 F stores consumption data for up to six months internally. To access this data for detailed analysis:

1. Ensure an SDHC card is inserted into the device.
2. Follow the on-screen prompts or refer to the device's menu to initiate data transfer to the SDHC card.
3. Safely remove the SDHC card from the Energie Logger.
4. Insert the SDHC card into a computer's card reader.
5. Use compatible software (often provided by VOLTCRAFT or available for download) to view, analyze, and store the collected data. This software typically allows for graphical representation and export of data.

8. メンテナンス

8.1 クリーニング

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.

8.2 ストレージ

Store the Energie Logger in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

8.3 電池の交換

If the backup battery (CR1620) needs replacement, follow the instructions in Section 5.1. A depleted backup battery may result in loss of stored data during power interruptions.

9。 トラブルシューティング

• 表示なし: Check if the device is properly plugged into a live power outlet.
• 読み物なし: Ensure the appliance is correctly connected to the logger and is powered on.
• Data Loss During Power Outage: Verify that the internal backup battery (CR1620) is correctly installed and has sufficient charge.
• SDHC Card Not Recognized: Ensure the SDHC card is inserted correctly and is formatted to a compatible file system (e.g., FAT32). Try a different SDHC card if issues persist.
• 不正確な読み取り: Ensure the device is used within its specified operating parameters.

10. 仕様

11. 保証とサポート

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official VOLTCRAFT webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。