Honeywell Home RTH2300B1012/E1 5-2 Day Programmable Thermostat User Manual

導入

The Honeywell Home RTH2300B1012/E1 is a 5-2 day programmable thermostat designed for simple and efficient control of your home's heating and cooling system. This thermostat allows you to set distinct programs for weekdays and weekends, helping to optimize energy usage by adjusting temperatures when you are away or asleep. Its backlit digital display ensures clear visibility of settings and current conditions. This manual provides comprehensive instructions for installation, operation, and maintenance to ensure optimal performance and comfort.

画像: 正面 view of the Honeywell Home RTH2300B1012/E1 programmable thermostat, showing its digital display and control buttons.

安全情報

• 警告：電気的危険。 Disconnect power to the heating/cooling system at the circuit breaker or fuse box before installing or servicing the thermostat. Failure to do so could result in electrical shock or equipment damage.
• このサーモスタットは低電圧用に設計されていますtage (24V) systems. Do not use on line voltage (120-240V) applications, such as electric baseboard heaters.
• Installation should be performed by a qualified technician if you are unsure about wiring procedures.
• すべての配線接続が安全であり、地域の電気規則に準拠していることを確認してください。

パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

• Honeywell Home RTH2300B1012/E1 Programmable Thermostat
• Wall Plate (mounting hardware included)
• ユーザーマニュアル（このドキュメント）

注記： Two AAA batteries are required for operation and are not included in the package.

Image: The Honeywell Home RTH2300B1012/E1 thermostat shown in its retail packaging, highlighting its 5-2 day programmability and backlit display.

互換性

このサーモスタットは、次のシステムと互換性があります。

• シングル-stage heating/cooling systems
• Heating-only systems
• Cooling-only systems
• Heat pumps without backup heat
• ミリボルトシステム
• Pellet stoves and fireplaces

このサーモスタットは ない 互換性あり:

• 電気ベースボードヒーター（120～240V）
• Heat pump systems with backup heat
• マルチ-stage heating/cooling systems

Image: Back of the thermostat packaging, detailing features, compatibility, and contact information for support.

インストール（セットアップ）

Follow these steps to install your new thermostat:

1. 電源を切る: 作業を始める前に、回路ブレーカーまたはヒューズ ボックスで暖房および冷房システムの電源をオフにします。
2. 古いサーモスタットを取り外します。 古いサーモスタットを壁から慎重に取り外します。
3. ラベルワイヤ: As you disconnect each wire, use the provided labels (if any) or masking tape to clearly mark each wire with the letter corresponding to its terminal on the old thermostat (e.g., R, G, Y, W, C). This step is crucial for correct wiring.
4. 壁プレートの取り付け: Position the new thermostat's wall plate on the wall. Use the included screws and anchors to secure it. Ensure it is level for aesthetic purposes.
5. ワイヤーを接続する: Connect the labeled wires to the corresponding terminals on the new wall plate. Refer to the wiring diagram in your specific system's manual if needed. Ensure connections are tight.
6. バッテリーの取り付け： Insert two fresh AAA alkaline batteries into the battery compartment of the thermostat.
7. サーモスタットを取り付ける: Align the thermostat with the wall plate and gently push until it snaps securely into place.
8. 電力を回復する： Turn the power back on to your heating and cooling system at the circuit breaker or fuse box.
9. Configure Blower Switch: On the back of the thermostat unit, locate the small switch labeled 'Gas' or 'Electric'. Set this switch according to your furnace type. 'Gas' is for gas or oil furnaces, 'Electric' is for electric furnaces or heat pumps.

操作手順

基本操作

• 設定ボタン: プログラミング モードに入り、選択を確認するために使用します。
• ホールドボタン： Used to temporarily or permanently hold the current temperature.
• 実行ボタン: Used to exit programming mode and resume the programmed schedule.
• 上/下矢印: Used to adjust temperature settings, time, and navigate programming options.
• System Switch (Heat/Off/Cool): Located at the bottom of the thermostat, select your desired operating mode.
• Fan Switch (Auto/On): Located at the bottom of the thermostat, select fan operation. 'Auto' runs the fan only when heating or cooling is active. 'On' runs the fan continuously.

時刻と曜日の設定

1. を押す セット ボタンを一度押します。時間が点滅します。
2. 使用 上/下矢印 時間を調整します。 押す セット.
3. 使用 上/下矢印 分を調整します。 押す セット.
4. 使用 上/下矢印 to adjust the day of the week. Press セット to save and exit, or 走る 保存せずに終了します。

Programming the 5-2 Day Schedule

This thermostat allows for one program for weekdays (Monday-Friday) and a separate program for weekends (Saturday-Sunday), each with four periods per day (Wake, Leave, Return, Sleep).

1. を押す セット button repeatedly until 'Set Program' appears on the display. The weekday (Mon-Fri) 'Wake' period will be displayed.
2. Wake Period: 使用 上/下矢印 to set the desired wake time, then press セット. を使用してください 上/下矢印 to set the desired temperature for the wake period, then press セット.
3. Leave Period: Repeat the process for the 'Leave' time and temperature, then press セット.
4. 返却期間： Repeat the process for the 'Return' time and temperature, then press セット.
5. Sleep Period: Repeat the process for the 'Sleep' time and temperature, then press セット.
6. The thermostat will now display the weekend (Sat-Sun) 'Wake' period. Repeat steps 2-5 for the weekend schedule.
7. After setting the weekend 'Sleep' period, press セット to save all changes and exit programming, or press 走る to exit without saving the last changes.

ホールド機能を使う

The Hold function allows you to temporarily or permanently override the programmed schedule.

• 一時的な保留： While in normal operation, use the 上/下矢印 to adjust the temperature. The new temperature will be held until the next programmed period begins. 'Temporary Hold' will be displayed.
• 永続的な保留： を押す 所有 button. 'Hold' will appear on the display. Use the 上/下矢印 to set the desired temperature. This temperature will be maintained indefinitely until you press the 走る button to resume the program.

バックライト

The display backlight activates for approximately 8 seconds when any button is pressed, improving visibility in low-light conditions.

メンテナンス

バッテリー交換

The thermostat requires two AAA alkaline batteries. When the battery icon appears on the display, replace the batteries immediately to ensure continuous operation. The thermostat retains its programming for a short period during battery replacement.

1. Remove the thermostat from the wall plate by gently pulling it forward.
2. 電池収納部を開け、古い電池を取り出します。
3. Insert two new AAA alkaline batteries, observing the correct polarity (+/-).
4. Snap the thermostat back onto the wall plate.

クリーニング

サーモスタットの外側を柔らかくて柔らかい布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。

トラブルシューティング

仕様

Image: The Honeywell Home RTH2300B1012/E1 thermostat held in a hand, illustrating its compact size and dimensions.

保証とサポート

This product comes with a manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Honeywell Home webサイト。

For technical support, troubleshooting assistance, or to view frequently asked questions, please visit: あなたのホーム.ハネウェル.com

You may also contact customer service at 1-800-468-1502.