Whirlpool WPW10117655 Dryer Start Relay Switch User Manual

1. はじめに

This manual provides essential information for the Whirlpool WPW10117655 Dryer Start Relay Switch. This component is a genuine OEM replacement part designed to ensure proper operation of your dryer. It is compatible with various Whirlpool dryer models, including MED5630TQ, MGD5720TQ0, MGD5821TW0, WED4900XW0, and MED5721TQ0.

The start relay switch is crucial for initiating the dryer's motor, allowing the appliance to begin its drying cycle. Proper installation and maintenance are vital for the longevity and safe operation of your dryer.

2.製品オーバーview

The Whirlpool WPW10117655 is a push-to-start switch that functions as a relay for the dryer motor. When activated, it sends a signal to the motor, allowing it to spin and begin the drying process. This part is manufactured to Whirlpool's internal specifications, ensuring compatibility and reliable performance with specified dryer models.

図2.1: 前面 view of the Whirlpool WPW10117655 Dryer Start Relay Switch, showing the push button and electrical terminals.

図2.2: 角度付き view of the start relay switch, highlighting the housing and connection points.

図2.3：側面 view of the start relay switch, showing the mounting tab and the push-button mechanism.

3. 安全情報

警告： Before attempting any repair or installation, always disconnect power to the dryer by unplugging it or turning off the circuit breaker. Failure to do so can result in electrical shock, serious injury, or death.

• 手袋や安全メガネなどの適切な個人用保護具 (PPE) を着用してください。
• 作業エリアが十分に明るく、障害物がないことを確認してください。
• If you are not comfortable performing the repair, consult a qualified appliance technician.
• 作業エリアに子供やペットを近づけないでください。
• Only use genuine replacement parts specified for your appliance model.

4. インストール

This section provides general guidance for replacing a dryer start relay switch. Specific steps may vary depending on your dryer model. Always refer to your appliance's service manual or a reputable repair guide for detailed, model-specific instructions.

必要なツール:

• ドライバー（プラスまたはマイナス）
• ナットドライバーまたはソケットセット（該当する場合）
• ラジオペンチ
• マルチメーター（テスト用、オプションだが推奨）

一般的なインストール手順:

1. 電源を切る: 乾燥機の電源プラグをコンセントから抜くか、乾燥機に電力を供給している回路ブレーカーをオフにします。
2. スイッチにアクセスします。 Depending on your dryer model, you may need to remove the top panel, front panel, or control panel to access the start relay switch. Refer to your dryer's service manual for exact access procedures.
3. 古いスイッチを見つけます。 Identify the existing start relay switch. It is typically located near the control panel or behind the start button.
4. 配線を外す: Carefully note or photograph the wiring connections to the old switch. Disconnect all wires from the terminals of the old switch.
5. 古いスイッチを削除します。 Unscrew or unclip the old switch from its mounting bracket.
6. 新しいスイッチをインストールします: Position the new Whirlpool WPW10117655 start relay switch in the mounting bracket and secure it.
7. 配線を再接続します: Connect the wires to the terminals of the new switch exactly as they were connected to the old one. Ensure all connections are secure.
8. 乾燥機を組み立て直す: スイッチにアクセスするために取り外したパネルまたはコンポーネントを再度取り付けます。
9. 電力を回復する： Plug the dryer back into the electrical outlet or turn on the circuit breaker.
10. テスト操作: Press the start button to verify that the dryer motor engages and the dryer begins its cycle.

Note: If you encounter any difficulties or are unsure about any step, it is recommended to seek assistance from a qualified appliance repair technician.

5. 操作手順

The WPW10117655 Dryer Start Relay Switch is an internal component that facilitates the starting of your dryer. It does not have user-adjustable settings or direct operational controls. Its function is integrated into the dryer's overall operation.

Once correctly installed, the start relay switch activates when the dryer's start button is pressed, sending power to the motor to initiate the tumbling action. The user's interaction with this component is limited to pressing the dryer's main start button as part of normal dryer operation.

6. メンテナンス

The Whirlpool WPW10117655 Dryer Start Relay Switch is a sealed electrical component and does not require routine user maintenance. Its lifespan is generally determined by usage and environmental factors within the dryer.

• 乾燥機を清潔に保つ: Regularly clean the lint filter and exhaust vent of your dryer to prevent overheating, which can stress electrical components.
• 配線の検査: During any other dryer maintenance or repair, visually inspect the wiring connected to the start relay for signs of wear, corrosion, or loose connections. Ensure power is disconnected before inspection.
• 過負荷を避ける: Overloading the dryer can put undue strain on the motor and its starting components, potentially shortening their lifespan.

7。 トラブルシューティング

If your dryer is experiencing issues related to starting, the start relay switch may be a contributing factor. Here are common symptoms associated with a faulty start relay:

• 乾燥機が起動しない: When you press the start button, the dryer makes no sound or attempt to start.
• Humming Sound, No Start: The dryer hums when the start button is pressed but the drum does not spin. This could indicate the motor is receiving power but not engaging, potentially due to a faulty relay or motor.
• Intermittent Starting: The dryer starts sometimes but not always, requiring multiple attempts to get it running.

Before replacing the start relay switch, consider checking other common issues:

• 電源： Ensure the dryer is plugged in and receiving power. Check the circuit breaker.
• ドアのスイッチ： The dryer will not start if the door switch is faulty or the door is not fully closed.
• 温度ヒューズ: A blown thermal fuse will prevent the dryer from starting.
• ドライブベルト: A broken drive belt can prevent the drum from spinning, though the motor might still hum.

If these other components are functioning correctly, and you observe the symptoms listed above, the start relay switch may need replacement. Professional diagnosis is recommended if you are unsure.

8. 仕様

9. 保証とサポート

As a genuine OEM replacement part, the Whirlpool WPW10117655 Dryer Start Relay Switch is typically covered under the warranty terms provided by Whirlpool for their replacement parts. Specific warranty duration and conditions may vary. Please retain your proof of purchase.

For detailed warranty information, technical support, or to locate authorized service providers, please visit the official Whirlpool webサイトをご覧いただくか、カスタマー サービスに直接お問い合わせください。

• ワールプール公式 Webサイト： www.ワールプール.com
• 顧客サービス： Refer to your original appliance manual or the Whirlpool web現在の連絡先情報については、サイトをご覧ください。

When contacting support, please have your dryer's model and serial number, as well as the part number (WPW10117655), readily available.