インフォーカス IN116

InFocus IN116 ポータブル DLP プロジェクター ユーザーマニュアル

モデル:IN116

1. はじめに

This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

  • InFocus IN116 プロジェクター
  • 電源コード
  • RGBケーブル
  • A / Vケーブル
  • 安全に関する注意事項
  • ユーザーマニュアル(この文書)
  • リモコン
  • HDMIケーブル

2.製品オーバーview

The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.

主な特徴

  • WXGA (1280 x 800) Native Resolution
  • 2700 ANSI Lumens (2200 lumens in Eco Mode)
  • 3000:1コントラスト比
  • 3D-Ready functionality
  • HDMI接続
  • 長持ちするlamp 長期使用向け
  • Easy maintenance with no filters to replace

プロジェクターのコンポーネント

トップ view of the InFocus IN116 projector showing control panel and lens

画像1: 上 View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.

側 view of the InFocus IN116 projector showing ventilation grilles

画像2: 側面 View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.

フロント view of the InFocus IN116 projector with the lens emitting light

画像3:正面 View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.

後方 view of the InFocus IN116 projector showing all input and output ports

画像4:リア View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.

3. セットアップ手順

配置

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.

電源への接続

  1. 電源コードをプロジェクターの電源入力に接続します。
  2. 電源コードのもう一方の端を接地されたコンセントに差し込みます。

ビデオソースの接続

The IN116 projector offers multiple input options:

  • HDMI: デジタルビデオとオーディオ用。ソースデバイスからプロジェクターのHDMIポートにHDMIケーブルを接続します。
  • VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
  • コンポジットビデオ: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
  • Sビデオ: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.

For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.

4. 操作手順

電源のオン/オフ

  1. 電源を入れるには、 button on the projector's control panel or the remote control. The power indicator light will illuminate.
  2. 電源を切るには、 button twice. The projector will enter a cooling cycle before shutting down completely.

入力ソースの選択

を押す ソース button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.

画像の調整

  • 集中: 画像が鮮明になるまでプロジェクター レンズのフォーカス リングを回転させます。
  • ズーム: プロジェクターレンズのズームリングを調整して画像サイズを変更します。
  • キーストーン補正: 画像が台形になる場合は、キーストーン補正機能 (通常は OSD メニューまたはリモコンの専用ボタンにあります) を使用して画像を正方形にします。
  • 画像モード: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.

エコモード

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.

3D機能

The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.

Video 1: InFocus IN110xv Series Overview. このビデオでは、view of the InFocus IN110xv series projectors, which includes the IN116 model. It highlights features such as lamp life, resolution options (including WXGA for IN116), brightness, vivid color technology, and 3D readiness. This video is provided by InFocus Corporation.

5. メンテナンス

Lamp 交換

プロジェクターlamp 寿命は限られています。amp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp。 lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.

  1. Power off the projector and disconnect the power cord.
  2. プロジェクターが完全に冷却されるまで待ちます(少なくとも 30 分)。
  3. lを見つけて開くamp door on the top of the projector.
  4. 古いlを慎重に取り外しますamp モジュール。
  5. 新しいlをインストールしますamp モジュールが確実に固定されていることを確認します。
  6. lを閉じますamp door and reconnect the power cord.
  7. lをリセットamp プロジェクターの OSD メニューでタイマーを設定します。

注意: プロジェクターlamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.

クリーニング

  • 外観: 柔らかくてamp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
  • レンズ: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
  • フィルター: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.

6。 トラブルシューティング

問題考えられる原因解決
画像が表示されない
  • 電源コードが外れている
  • プロジェクターの電源が入っていません
  • 間違った入力ソースが選択されました
  • ビデオケーブルが緩んでいるか故障している
  • 電源接続を確認してください。
  • 電源ボタンを押します。
  • ソースボタンを押して正しい入力を選択します。
  • Ensure video cables are securely connected. Try a different cable.
画像がぼやけている
  • レンズの焦点が合っていない
  • プロジェクターがスクリーンに近すぎる/遠すぎる
  • レンズのフォーカスリングを調整します。
  • ズームリングを調整するか、プロジェクターの位置を変更します。
プロジェクターが過熱してシャットダウンする
  • 換気の遮断
  • 周囲温度が高い
  • プロジェクターの周囲に十分な空気の流れを確保してください。
  • 涼しい環境で操作してください。
HDMI picture has a blue tint
  • HDMI signal issue
  • プロジェクターの電源をオフにして再度オンにします。
  • If the issue persists, fully unplug the projector from power and then reconnect.

7. 仕様

特徴詳細
モデル番号IN116
ディスプレイ技術情報漏洩防止
ネイティブ解像度1280×800(ワイド)
輝度2700 ANSIルーメン(エコモード2200ルーメン)
コントラスト比3000:1
Lamp Life (Normal/Eco)5,000時間 / 6,000時間
接続技術HDMI, VGA (x2), Composite Video, S-Video, Audio In (3.5mm), Audio Out (3.5mm), RS232C, USB B Mini
特集3D対応
製品寸法12.75 x 12.75 x 5.5インチ
アイテム重量4.78ポンド(2.17kg)
メーカーインフォーカス
初回利用可能日1年2011月XNUMX日

8. 保証とサポート

限定保証

All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:

  • プロジェクター: 5年間の限定保証
  • 部品と労力: 2年間の完全保証
  • Lamp: 6ヶ月保証

For detailed terms and conditions of the warranty, please refer to the official InFocus webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。

カスタマーサポート

技術的なサポート、トラブルシューティング、保証請求については、InFocusカスタマーサポートまでお問い合わせください。InFocusの公式ウェブサイトをご覧ください。 web連絡先情報と追加リソースについては、こちらのサイトをご覧ください。

正式 Webサイト: www.infocus.com

関連文書 - IN116

前view InFocus IN1110a/IN1112a デジタルプロジェクター ユーザーガイド
このユーザーガイドは、InFocus IN1110aおよびIN1112aデジタルプロジェクターの包括的な使用方法を説明します。セットアップ、接続、操作、画像調整、トラブルシューティング、メンテナンスについて網羅しており、ユーザーがプレゼンテーション体験を最大限に高められるようサポートします。
前view InFocus C250、C250W、C315 プロジェクター ユーザーマニュアル - セットアップ、操作、およびトラブルシューティング
InFocus C250、C250W、C315デジタルプロジェクターの包括的なユーザーマニュアルです。セットアップ、デバイスの接続、画像調整、操作、メンテナンス、トラブルシューティング、安全ガイドラインを網羅しています。
前view InFocus Quantum Laser Nemesis I & II ユーザーガイド
InFocus Quantum Laser Nemesis I (P141) および Nemesis II (P127、P128) プロジェクターの包括的なユーザーガイド。レーザー技術、4K サポート、柔軟な設置、操作などの機能を網羅しています。
前view InFocus 量子レーザープロジェクター ユーザーガイド
InFocus Quantum Laser プロジェクター シリーズの包括的なユーザー ガイド。IN1068SL や IN1069SL などのモデルのセットアップ、操作、安全に関する指示、仕様、トラブルシューティングを網羅しています。
前view InFocus Quantum LED Apex Master IN3058SL ユーザーマニュアル
InFocus Quantum LED Apex Master IN3058SLプロジェクターの包括的なユーザーマニュアル。セットアップ、操作、リモートコントロール機能、製品の詳細について説明しています。view、接続ポート、仕様、トラブルシューティング、規制遵守などについて説明します。
前view InFocus IN2100 シリーズプロジェクタークイックスタートガイド
InFocus IN2100シリーズプロジェクター(モデルV2000、M2100、IN2112、IN2114、IN2116)のクイックスタートガイド。プロジェクターの開梱、接続、セットアップ、調整、トラブルシューティングの方法を説明します。