Velleman MK179 近接カードリーダーキット ユーザーマニュアル

導入

This manual provides comprehensive instructions for the assembly, operation, and maintenance of the Velleman MK179 Proximity Card Reader Kit. The MK179 is designed for various access control and security applications, including opening doors, managing security systems, and authorizing equipment use. Please read these instructions carefully before beginning assembly or operation.

主な特徴

• Easy Addition and Removal of Tags
• Coil Can Be Mounted Away From the Board
• Extremely Secure and Practically Safe Operation

セットアップと組み立て

The Velleman MK179 is supplied as a kit and requires assembly. Careful soldering and component placement are essential for proper functionality.

コンポーネントの識別

Before starting, identify all components against the provided parts list (not included in this manual, refer to kit packaging). The main circuit board and the proximity cards are key elements.

画像1: The Velleman MK179 circuit board, showing various electronic components such as resistors, capacitors, integrated circuits, and a relay. This board forms the core of the proximity card reader.

組み立て手順

1. ワークスペースを準備します。 Ensure a clean, well-lit workspace with appropriate soldering tools.
2. Solder Components: Carefully solder all components onto the printed circuit board according to the silk screen markings and the kit's detailed instructions. Pay close attention to component orientation (e.g., diodes, ICs, electrolytic capacitors). 注意： Incorrect soldering can prevent the device from functioning. Double-check all solder joints for bridges or cold joints.
3. コイルを接続: The proximity coil can be mounted directly on the board or remotely, allowing for flexible installation options. Ensure a secure connection to the designated terminals.
4. 電源： Connect a stable 12V DC power supply to the designated input terminals. Observe correct polarity.

画像2: An assembled Velleman MK179 Proximity Card Reader Kit, showcasing the compact design of the circuit board with its components and the integrated relay.

操作手順

The MK179 operates by reading unique identification codes from proximity cards (tags).

画像3: Two white proximity cards, included with the Velleman MK179 kit, used for activating the reader.

Adding and Removing Tags

The MK179 features an easy method for programming and de-programming proximity tags. Refer to the detailed instructions provided with your kit for the specific button presses and LED indicators for adding or removing tags. Generally, this involves:

• 追加するには Tag: Activate the programming mode (e.g., by pressing a button for a specific duration), then present the new tag to the reader coil. The device will confirm successful addition (e.g., via an LED flash).
• To Remove a Tag: Activate the removal mode, then present the tag to be removed. The device will confirm removal.

通常操作

一度 tags are programmed, simply present a valid tag to the reader coil. The device will recognize the tag and activate its output (e.g., a relay closure) for a pre-set duration, allowing it to control connected devices like door locks or alarms.

メンテナンス

The Velleman MK179 Proximity Card Reader Kit is designed for reliable operation with minimal maintenance.

• クリーニング： Keep the circuit board and reader coil free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
• 環境条件: Ensure the device is operated within its specified environmental conditions (temperature, humidity) to prevent damage.
• 電源： Use only a stable and correctly rated 12V DC power supply. Fluctuations or incorrect voltagユニットを損傷する可能性があります。

トラブルシューティング

If you encounter issues with your Velleman MK179, consider the following troubleshooting steps:

• デバイスの電源が入っていない:
  • 電源の接続を確認し、正しい電圧であることを確認してください。tage (12V DC) and polarity.
  • Inspect for any short circuits or incorrect component placement on the assembled board.
• Tags Not Being Read:
  • 確実に tag is presented within the effective reading range of the coil.
  • 確認する tags have been correctly programmed into the device.
  • Check the coil connection to the main board.
• 出力動作が正しくありません:
  • Confirm the relay connections to the external device are correct.
  • Review the programming steps for adding/removing tags to ensure no errors occurred.
• 組み立ての問題:
  • If the device does not function after assembly, carefully inspect all solder joints for quality. A common issue is a solder bridge between traces or a "cold" solder joint that doesn't make proper electrical contact.
  • Verify that all components are in their correct positions and orientations.

仕様

サポートとお問い合わせ

For further assistance or detailed technical support regarding your Velleman MK179 Proximity Card Reader Kit, please refer to the official Velleman webサイトにアクセスするか、カスタマーサービスにお問い合わせください。

Note: Specific warranty information is typically provided with the product packaging or on the manufacturer's official webサイト。