1. はじめに
The ADJ H2O DMX Pro is an advanced LED lighting fixture designed to create a simulated water flowing effect. This unit features DMX-512 control, a powerful 50W LED source, and offers versatile applications for various environments such as nightclubs, bars, restaurants, and special events. Its low heat output and efficient power consumption allow for extended operation.
2. 安全情報
Always observe the following safety precautions to ensure safe operation and prevent damage to the unit:
- Ensure the unit is connected to a grounded power source.
- ユニットを雨や湿気にさらさないでください。
- 光源が目に直接当たらないようにしてください。
- メンテナンスや清掃を行う前に電源を切ってください。
- ユニット周囲の換気を良好に保ち、通気口を塞がないようにしてください。
- Only qualified personnel should perform service or repairs.
- 指定されたボリュームのみを使用してくださいtage range (AC 120-240V 50/60Hz).
3. 主な特徴
The H2O DMX Pro offers a range of features for dynamic lighting effects:
- Bright 50W LED source for simulated water flowing effects.
- Designed for projection on walls, ceilings, or floors, with or without fog.
- 3 DMX Channels: Dimming, Glass Wheel, and Colors.
- Two operational modes: DMX and Master/Slave.
- Digital DMX Display with 4-button menu for easy navigation.
- Equipped with two glass effect wheels and one independent dichroic color wheel.
- Six dichroic colors: Orange, Green, Blue, Yellow, Purple, and White.
- 0-100% Dimming via DMX.
- Manual focusing lens.
- Interchangeable beam angles: 34 or 52 degrees (includes 2 replaceable lenses).
- IEC In & Out for daisy-chaining power (connect up to 5 units).
- 1/4-inch input for optional UC3 remote control (sold separately).
- Fan cooled for continuous operation without duty cycle.
- High-tech plastic molded ends for protection during transport.
4. セットアップ
4.1 開梱
Carefully unpack the unit and check for any damage during shipping. Ensure all components are present, including the H2O DMX Pro unit, hanging bracket, and two interchangeable lenses.
4.2 取り付け
The unit includes a hanging bracket for secure mounting. Ensure the mounting surface can support the weight of the fixture. Always use a safety cable when suspending the unit overhead.
図4.1：正面アングル view of the H2O DMX Pro with its integrated hanging bracket.
Figure 4.2: Another angle view of the H2O DMX Pro, showing the lens and ventilation.
4.3電源接続
Connect the unit to a compatible power outlet using the IEC power input. For daisy-chaining multiple units, use the IEC In and Out ports. Up to 5 H2O DMX Pro units can be daisy-chained together.
Figure 4.3: Rear panel of the H2O DMX Pro, illustrating the IEC power input/output, DMX input/output, and 1/4" remote control input.
4.4 レンズの取り付け
The H2O DMX Pro comes with two interchangeable lenses (34-degree and 52-degree) to adjust the beam angle. Select the appropriate lens for your desired projection width and carefully install it onto the front of the unit.
5. 操作手順
5.1コントロールパネルとディスプレイ
The unit features a digital DMX display and a 4-button menu system for easy navigation and setting adjustments. Refer to the display for current mode, DMX address, and other parameters.
5.2 操作モード
The H2O DMX Pro supports two primary operational modes:
- DMXモード： Allows full control over dimming, glass wheel rotation, and color selection via a DMX-512 controller. The unit utilizes 3 DMX channels.
- マスター/スレーブ モード: Connect multiple H2O DMX Pro units via DMX cables. Set one unit as the Master, and the others as Slaves. The Slave units will mirror the Master's settings and effects.
5.3 DMX制御
To operate the unit via DMX, connect a DMX controller to the DMX Input. Set the DMX address on the unit using the digital display. The 3 DMX channels control:
- チャンネル1： 調光（0～100％）
- チャンネル2： Glass Wheel (rotation speed and direction)
- チャンネル3： Colors (selection of 6 dichroic colors)
5.4 マニュアルフォーカス
Adjust the manual focusing lens on the front of the unit to achieve a sharp and clear projection of the water effect on your desired surface.
5.5 Effect Exampレ
図5.1：例ample of the H2O DMX Pro projecting an orange simulated water effect.
図5.2：例ample of the H2O DMX Pro projecting a purple simulated water effect.
6. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your H2O DMX Pro.
6.1 クリーニング
Periodically clean the exterior of the unit with a soft, dry cloth. For the lens and glass effect wheels, use a lint-free cloth and a mild glass cleaner. Ensure the unit is powered off and disconnected before cleaning.
6.2 Fan and Ventilation
Ensure the cooling fan and ventilation openings are free from dust and debris. Blocked vents can lead to overheating and reduced performance.
6.3 LED Source
The 50W LED source has a long life rating of 30,000 hours and typically does not require replacement under normal operating conditions.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ユニットの電源が入りません。 | 電源がありません。ケーブルに障害があります。 | Check power cable connection; verify power outlet; try a different cable. |
| 光出力なし。 | Dimmer channel set to 0; LED failure. | Increase dimmer value via DMX; contact support if LED is faulty. |
| DMX コントロールが機能しません。 | DMX アドレスが正しくありません。DMX ケーブルに障害があります。DMX コントローラーに問題があります。 | Verify DMX address on unit matches controller; check DMX cable connections; test with another DMX controller. |
| Effect is blurry. | レンズの焦点が合っていません。 | Adjust the manual focusing lens on the front of the unit. |
| ユニットが過熱しています。 | 換気が妨げられ、周囲の温度が高すぎる。 | 通気口が開いていることを確認し、換気のよい場所で作業してください。 |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| 製品名 | H2O DMX Pro |
| モデル番号 | H2O711 |
| 光源 | 50W LED |
| LED Life Rating | 30,000時間 |
| DMXチャンネル | 3 (Dimming, Glass Wheel, Colors) |
| 動作モード | DMX, Master/Slave |
| 色 | 6 Dichroic (Orange, Green, Blue, Yellow, Purple, White) |
| 減光 | 0-100% (via DMX) |
| ビーム角度 | 34 or 52 degrees (interchangeable lenses) |
| 消費電力 | 54W |
| マルチボリュームtage操作 | AC 120-240V 50/60Hz |
| LUX @ 3M | 1800 (34-degree lens), 1100 (52-degree lens) |
| 寸法（長さx幅x高さ） | 11.5 x 8.75 x 4.75 インチ / 292 x 236 x 121 mm |
| 重さ | 9ポンド/ 4 kg |
| 材質タイプ | Glass (for effect wheels) |
9. 保証とサポート
保証情報およびテクニカルサポートについては、公式ADJを参照してください。 webご購入の際は、サイトをご覧いただくか、正規販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。
さらに詳しいサポートについては、 ADJ Store on Amazon or the official ADJ webサイト。
