1. はじめに
The Sanus SF22-B1 Steel Foundation IV speaker stands are designed to support medium-to-large bookshelf speakers weighing up to 35 lbs (15.8 kg). These 22-inch stands feature a robust steel construction, providing a stable and acoustically optimized platform for your audio equipment. The design incorporates features for enhanced stability, speaker isolation, and discreet cable management.
Image 1: Sanus SF22-B1 Steel Foundation IV 22-inch Speaker Stands. This image shows the assembled speaker stand in black, highlighting its sturdy base, twin pillars, and top plate.
2. 安全情報
- 重量容量: Do not exceed the maximum weight capacity of 35 lbs (15.8 kg) per stand. Overloading can lead to instability and potential damage.
- 安定した表面： Always place the speaker stands on a flat, level, and stable surface. Uneven surfaces can compromise stability.
- 組み立て： 組み立て説明書に従って、すべての部品がしっかりと固定されていることを確認してください。部品が緩んでいると不安定になる可能性があります。
- 子供とペット: Keep children and pets away from the stands during assembly and ensure the stands are placed in a location where they are not easily knocked over.
- 液体接触: Avoid direct contact with liquids. Clean with a dry or slightly damp 布。
3. パッケージ内容
Verify that all components are present before beginning assembly. A Phillips screwdriver and scissors (not included) will be required for assembly.
- Steel Bases (2)
- Heavy-Gauge Steel Pillars (4)
- Top Plates (2)
- Adjustable Carpet Spikes (8)
- ゴム足（8）
- Brass Studs (8)
- Neoprene Pads (8)
- Speaker Wire Guides (4)
- 組み立てハードウェア（ネジ、ワッシャーなど）
4. セットアップとインストール
Follow these steps for proper assembly and installation of your Sanus SF22-B1 speaker stands. Allow approximately one hour for the first stand, and less for the second.
- コンポーネントを解凍します: すべての部品をパッケージから慎重に取り出し、傷がつかないよう清潔で柔らかい場所に置いてください。パッケージの内容物リストと照らし合わせて、すべての部品を確認してください。
- Attach Pillars to Base: Secure the twin heavy-gauge steel pillars to the steel base using the provided hardware. Ensure all screws are tightened firmly.
- Optional Mass Loading: For enhanced stability and resonance damping, the steel pillars can be filled with sand or shot (not included). This step should be completed after attaching pillars to the base but before attaching the top speaker platforms.
- トッププレートを取り付ける: Secure the 8-inch by 8.5-inch top plate to the pillars using the appropriate hardware.
- 取り付け脚: Choose the appropriate feet for your flooring:
- のために carpeted surfaces, install the adjustable carpet spikes into the base. These provide superior stability by piercing the carpet.
- のために hardwood or tile surfaces, install the rubber feet. When installing rubber feet, twist them as you push down to ensure they seat properly into the holes.
- Speaker Isolation: To isolate your speakers from the stand, choose between:
- Brass Studs: For a direct, firm coupling between speaker and stand.
- Neoprene Pads: For vibration absorption and a non-slip surface.
- Speaker Bolt-Mounting (Optional): These stands support bolt-mounting for speakers equipped with Foundation Mounts or similar threaded inserts. Refer to your speaker's manual for compatibility and specific instructions.
- Speaker Wire Management: The stands feature optional guides for managing speaker wires. These guides attach along the sides of the pillars, allowing wires to run discreetly. Note that wires run externally along the pillars and then under the top platform to the speaker backs; there is no internal wire path through the base or pillars.
Image 2: Sanus Installation Icons. This image illustrates Sanus's commitment to easy installation, highlighting a drill icon for simple setup.
5. 操作手順
Once assembled, the Sanus SF22-B1 stands provide a stable platform for your speakers. Proper placement is key to optimal audio performance.
- スピーカーの配置： Carefully place your bookshelf speakers on the top plates, ensuring they are centered and stable. Use the brass studs or neoprene pads for isolation as desired.
- Directional Alignment: The design of the stand dictates that the speaker direction will align with the orientation of the base. Consider this when positioning the stands in your listening environment.
- ケーブル配線: Utilize the provided wire guides to keep speaker cables neat and secure along the stand pillars.
Image 3: Sanus Speaker Stand with Speaker. This image shows a black speaker stand with a bookshelf speaker placed on its top plate, demonstrating typical usage.
6. メンテナンス
スピーカースタンドの寿命と外観を保つために、次の簡単なメンテナンスガイドラインに従ってください。
- クリーニング： Dust the stands regularly with a soft, dry cloth. For more stubborn marks, use a slightly damp 布で拭き、すぐに乾かしてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
- 接続を確認してください: Periodically check all screws and fasteners to ensure they remain tight and secure. This helps maintain the stand's stability.
- 足を検査する: Ensure the carpet spikes or rubber feet are in good condition and properly seated, especially if the stands are moved.
7。 トラブルシューティング
If you encounter any issues with your Sanus SF22-B1 speaker stands, refer to the following common solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スタンドが不安定またはぐらつくように感じます。 | Loose assembly screws; uneven floor; incorrect feet selection. | Tighten all assembly screws. Ensure stand is on a level surface. Verify correct feet (spikes for carpet, rubber for hard floors) are installed and adjusted. Consider filling pillars with sand/shot for added mass. |
| Difficulty installing rubber feet. | Rubber feet are not threaded and require proper technique. | Twist the rubber feet as you push them into the holes in the base. This helps them seat more easily and securely. |
| Speaker wires are not neat. | Wire guides not used or improperly positioned. | Utilize the provided plastic wire guides to route cables along the pillars. Ensure they are securely attached to keep wires in place. |
| Speakers slide on top plate. | No isolation/grip method used, or incorrect method for speaker base. | Ensure neoprene pads are placed under the speakers for a non-slip surface and vibration absorption. If using brass studs, ensure they are properly aligned with the speaker's base. |
8. 仕様
- モデル： SF22-B1
- 製品寸法: 27.7 x 16.4 x 4 インチ (70.36 x 41.66 x 10.16 cm)
- 商品の重量: 30ポンド（13.6kg）
- Maximum Speaker Weight: スタンドあたり35ポンド（15.8kg）
- 材料： Steel, Brass
- 色： 黒
- 仕上げタイプ： 粉体塗装
- トッププレート寸法: 8 x 8.5インチ（20.32 x 21.59 cm）
9. 保証とサポート
Sanus products are designed for quality and ease of installation. While specific warranty details may vary, Sanus stands behind its products. For any questions, technical assistance, or support, please contact Sanus customer care.
Sanus offers U.S.-based expert customer care seven days a week to assist you with any inquiries regarding your speaker stands or other Sanus products.
For the most current warranty information and support contact details, please visit the official Sanus webサイトをご覧いただくか、購入時に付属していたドキュメントを参照してください。
