DSC PK5508 8-Zone LED Keypad User Manual

1. はじめに

The DSC PK5508 is an 8-zone LED keypad designed for use with DSC security alarm systems. It provides a user interface for arming and disarming the system, viewing system status, and performing other basic security functions. This keypad features an 8-zone LED display for clear status indication and a built-in 433MHz wireless receiver, allowing for integration with compatible wireless security devices.

This manual provides essential information for the proper setup, operation, and maintenance of your DSC PK5508 keypad.

図1: 前面 view of the DSC PK5508 8-Zone LED Keypad. This image shows the numerical keypad, function buttons, and the 8 LED zone indicators.

2. セットアップとインストール

Installation of the DSC PK5508 keypad should be performed by a qualified security technician to ensure proper functionality and compliance with local codes. The keypad connects to the main security control panel via a 4-wire connection (Red, Black, Yellow, Green).

2.1 キーパッドの取り付け

Select a suitable indoor location, typically near an entry/exit point, away from extreme temperatures or moisture.
Carefully remove the backplate from the keypad.
Mount the backplate securely to the wall using appropriate screws and anchors.

2.2配線接続

接続する赤 wire to the AUX+ terminal on the control panel.
接続する黒 wire to the AUX- terminal on the control panel.
接続する黄色 wire to the KEYBUS Yellow terminal on the control panel.
接続する緑 wire to the KEYBUS Green terminal on the control panel.
すべての接続が安全で、正しく極性化されていることを確認します。

2.3 初期電源投入

Once wiring is complete, apply power to the security control panel. The keypad should illuminate and perform an initial self-test. If the keypad does not power on, verify all wiring connections and power supply to the control panel.

3. 操作手順

This section outlines the basic user operations for the DSC PK5508 keypad.

3.1システムの準備

To Arm Away: Enter your 4-digit User Code. The "Armed" indicator will illuminate, and the exit delay will begin.
To Arm Stay: を押す [止まる] button, then enter your 4-digit User Code. The "Armed" indicator will illuminate, and the exit delay will begin (typically shorter for Stay arming).
Quick Arm (if enabled): を押し続けます [止まる] button for 2 seconds for Stay arming, or the [離れて] button for 2 seconds for Away arming.

3.2システムの武装解除

To disarm the system, enter your 4-digit User Code. The "Armed" indicator will turn off, and any alarm in progress will cease.

3.3 Checking Zone Status

The 8 LED indicators on the keypad correspond to zones 1 through 8. A lit LED indicates that the corresponding zone is open or in an alarm condition. A flashing LED may indicate a bypassed zone or a trouble condition, depending on system programming.

3.4 バイパスゾーン

Bypassing a zone allows you to arm the system while a specific zone is open or faulty. This function is typically used for temporary situations, such as leaving a window open.

を押す [*] ボタンをクリックし、 [1].
Enter the 2-digit zone number(s) you wish to bypass (e.g., 01 for Zone 1, 02 for Zone 2).
を押す [＃] 終了するにはボタンを押してください。
Arm the system as usual. Bypassed zones will be ignored until the system is disarmed.

3.5 Viewing Trouble Conditions

If the "Trouble" indicator is lit, press the [*] ボタンをクリックし、 [2] に view the specific trouble condition. The zone LEDs will illuminate to indicate the type of trouble (e.g., low battery, AC failure, system fault). Consult your installer or the main control panel manual for a complete list of trouble codes.

4. メンテナンス

Proper maintenance ensures the longevity and reliable operation of your DSC PK5508 keypad.

4.1 クリーニング

Clean the keypad surface periodically with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the keypad, as this can damage the electronics or finish.

4.2 Regular System Checks

It is recommended to test your security system, including the keypad, regularly (e.g., monthly). This involves arming and disarming, and if applicable, testing individual zones. Refer to your main security system manual for detailed testing procedures.

5。トラブルシューティング

This section provides solutions for common issues you might encounter with your DSC PK5508 keypad. For complex issues, always contact your security system installer or a qualified technician.

Keypad is unresponsive or blank:
- Check the power supply to the main control panel.
- Verify all wiring connections between the keypad and the control panel are secure and correct.
- A power cycle of the main control panel (disconnecting AC and battery, then reconnecting) may resolve temporary issues.
"Trouble" light is on:
- プレス [*] それから [2] to identify the specific trouble condition.
- Common troubles include low battery (main panel or wireless devices), AC power failure, or system faults. Address the indicated issue.
System fails to arm:
- Ensure all zones are closed (no zone LEDs lit, unless intentionally bypassed).
- Verify you are entering the correct User Code.
- Check for any trouble conditions that might prevent arming.

6. 仕様

特徴	仕様
モデル番号	PK5508
製品寸法	7 x 2 x 5インチ
アイテム重量	10.4オンス
メーカー	DSC
キーパッドタイプ	8-Zone LED
ワイヤレス受信機	Built-in 433MHz

	DSC Power632 PC1555MX インストールマニュアル DSC Power632 PC1555MX セキュリティシステムの包括的なインストールマニュアル。配線、プログラミング、機能、トラブルシューティングについて説明しています。
	DSC LCD4500 Keypad User Manual - PC4010 Security System Operation Guide Comprehensive user manual for the DSC LCD4500 keypad and PC4010 security system. Learn to operate, program, and maintain your alarm system with detailed instructions and feature explanations from Digital Security Controls Ltd.
	DSC PowerSeries Neo キーパッドのインストールとプログラミングマニュアル DSC HS2LED、HS2ICN(P)、および HS2LCD(P)(RF) セキュリティシステムキーパッドの包括的なインストールおよびプログラミングガイド。最適なパフォーマンスを実現するための機能、配線、および構成を網羅しています。
	HS2TCHP E タッチスクリーンユーザーマニュアル - DSC セキュリティ DSC HS2TCHP E タッチスクリーンのユーザーマニュアル。PowerSeries Neo および Pro アラームシステムの機能、操作、安全性に関する手順と情報を提供します。
	DSC Power632 PC1565 インストールマニュアル DSC Power632 PC1565 セキュリティシステムの詳細なインストールマニュアル。インストーラー向けのセットアップ、配線、プログラミング、およびシステム機能について説明します。
	DSC PowerSeries Neo HS2LED/HS2ICON/HS2LCD インストール手順このドキュメントでは、DSC PowerSeries Neo HS2LED、HS2ICON(P)(RF)X、および HS2LCD(P)(RF)X キーパッドのインストール手順について説明し、取り付け、配線、プログラミング、およびワイヤレスデバイスの構成について詳しく説明します。

DSC PK5508