1.製品オーバーview
The Leviton 25W34 is a 15-Amp, 277-Volt, industrial-grade, grounding, locking connector, part of the Wetguard product line. These devices are engineered for demanding industrial applications where electrical connections are exposed to wet and dusty locations. They meet stringent IEC IP67 and NEMA ratings for water ingress protection, ensuring reliable performance in harsh environments.
The connector features a durable Santoprene TPV material in yellow, with an L7-15R configuration and 3 wires. It is approved by UL 498, CSA C22.2, and NOM 057 standards.
2. 主な特徴
- Polarized Type: Ensures correct electrical connection.
- Santoprene TPV Material: Provides resistance to water, acids, alkalis, industrial lubricants, cleaners, and solvents.
- L7-15R Configuration: A specific locking type for secure connections.
- 3本のワイヤー: Standard wiring for this type of connector.
- 承認: UL 498, CSA C22.2, NOM 057 certified for safety and performance.
- 巻tage/Current Rating: 277V ボリュームtage、15 Ampere Current.
- 接地: Includes a grounding pole for safety.
- 防水・防塵: Meets IEC IP66 & IP67 and NEMA Type 4, 4X, 6, 6P protection ratings when properly mated or with closure caps.
- 耐腐食性: Electroless nickel-coated brass blades, contacts, terminal screws, and wiring clamps enhance durability in corrosive environments.
- 配線が簡単: Deep wire wells facilitate easier wiring.
- クリアハウジング： Allows for visual inspection of proper wire insertion and connection.
- 安全な接続: Patented compression nut and strain relief system ensures integrity of both the watertight seal and electrical connection.
3.製品コンポーネント
The Leviton 25W34 locking connector is engineered with robust components to ensure reliable performance in challenging conditions.
Image: The Leviton 25W34 Wetguard Locking Connector, shown in its yellow industrial-grade housing.
For a visual demonstration of the Wetguard product line's features and components, please refer to the video below:
ビデオ: オーバーview of Leviton Wetguard wiring devices, highlighting their robust design, watertight capabilities, and various applications in industrial environments. This video demonstrates the features of plugs, connectors, inlets, outlets, and FD boxes within the Wetguard line.
4.設置と配線
Proper installation and wiring are crucial for the safe and effective operation of the Leviton 25W34 locking connector. Always ensure power is disconnected before beginning any wiring procedures.
コネクタの配線
- 分解： Carefully unscrew the compression nut and separate the housing components to access the wiring module.
- ワイヤーの準備: Strip the insulation from the ends of the three wires (hot, neutral, ground) according to standard electrical practices, ensuring sufficient bare wire for connection.
- 繋がり： Insert each wire into its corresponding deep wire well on the wiring module. The clear housing allows for visual confirmation of proper wire insertion. Securely tighten the terminal screws to ensure a firm electrical connection.
- 組み立て： Reassemble the housing components, ensuring the patented compression nut and strain relief system are correctly engaged. Tighten the compression nut to create a secure, watertight seal around the cable.
The electroless nickel-coated brass blades, contacts, terminal screws, and wiring clamps are designed for enhanced resistance to harsh industrial environments and corrosion, contributing to a long-lasting and reliable connection.
5. 操作手順
The Leviton 25W34 locking connector is designed for secure electrical connections in wet and dusty industrial environments. Follow these instructions for proper operation:
- Mating the Connector: Align the blades of the plug with the corresponding slots in the receptacle (or vice-versa for a connector). Insert the plug fully and twist to lock it into place. The L7-15R configuration ensures a secure, twist-lock connection, preventing accidental disconnections during operation.
- Maintaining Protection: When the connector is not in use, ensure that any closure caps are securely in place. This maintains the device's IP66/IP67 and NEMA Type 4, 4X, 6, 6P protection ratings against water and dust ingress.
- 切断: To disconnect, twist the plug in the opposite direction to unlock it, then pull it straight out from the receptacle.
6. メンテナンス
Regular maintenance helps ensure the longevity and optimal performance of your Leviton 25W34 Wetguard locking connector.
- 検査： Periodically inspect the connector for any signs of wear, damage, cracks, or corrosion on the housing, blades, contacts, or terminal screws. Ensure the multi-point sealing system and compression nut are intact and free from debris.
- クリーニング： The Santoprene TPV husk is resistant to many industrial lubricants, cleaners, and solvents. Clean the device as needed using appropriate industrial cleaners that are compatible with Santoprene TPV material. Avoid abrasive cleaners or tools that could damage the housing or seals.
- シールの完全性: Verify that all seals and gaskets are in good condition and properly seated. A compromised seal can lead to water or dust ingress, affecting performance and safety.
- ハードウェア: Check that all screws and fasteners are tight. The stainless steel hardware is designed for maximum protection against corrosion.
7。 トラブルシューティング
If you encounter issues with your Leviton 25W34 Wetguard locking connector, consider the following troubleshooting steps:
電力の喪失
- 接続チェック: Ensure the plug and connector are fully mated and securely locked. A loose connection can interrupt power flow.
- 電源: Verify that the power source (e.g., circuit breaker, outlet) is active and supplying power.
- 内部配線: If accessible and safe to do so (with power disconnected), inspect the internal wiring for any loose connections or damage. The clear housing can aid in this visual inspection.
Water or Dust Ingress
- Immediate Disconnection: If water or dust is observed inside the connector, immediately disconnect power to prevent electrical hazards.
- シール検査: Inspect the multi-point sealing system, including the compression nut and any closure caps, for proper installation and integrity. Ensure no debris is preventing a complete seal.
- コンポーネントの交換: If seals or housing components are damaged, they may need to be replaced to restore the watertight and dust-tight protection.
腐食
- 目視検査： Although designed for corrosion resistance, prolonged exposure to extremely harsh chemicals or environments can still cause corrosion. Visually inspect the blades, contacts, and screws.
- 交換： If significant corrosion is observed, the device may need to be replaced to ensure safe and reliable electrical contact.
8. 技術仕様
| 特徴 | 詳細 |
|---|---|
| ワイヤー数 | 3 |
| プラグフォーマット | NEMAL7-15R |
| 製品グレード | 産業 |
| 仕様が満たされました | CSA, NEMA, UL |
| Amp怒る | 15 Amps |
| 欧州連合 | 078477969526 |
| メーカー | レビトン |
| 世界貿易識別番号 | 00078477969526 |
| 部品番号 | 25W34 |
| アイテム重量 | 0.01オンス |
| 製品寸法 | 5 x 9 x 1.5インチ |
| 商品型番 | 25W34 |
| 仕上げる | 黄色 |
| 厚さ | 1インチ |
| 商品パッケージ数量 | 1 |
| 含まれるコンポーネント | 25W34 |
| 電池は必要ですか? | いいえ |
| 保証内容 | 製造 |
| ASIN | B003AUNJN2 |
| 初回利用可能日 | 27年2009月XNUMX日 |
| ブランド | レビトン |
| 巻tage | 277ボルト |
| 材料 | Brass, Nylon |
| コネクタタイプ | プラグイン |
| 極数 | 2 |
| GTIN | 078477969526 |
9. 保証とサポート
保証情報
The Leviton Wetguard product line, including the 25W34 locking connector, is backed by a best-in-class Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. For detailed warranty terms and conditions, including limitations and exclusions, please refer to the official Leviton webサイトにアクセスするか、カスタマー サポートにお問い合わせください。
返品
This product typically has a 30-day return policy for refund or replacement, subject to the retailer's specific terms and conditions. Please consult the point of purchase for their return process and requirements.
メーカーサポート
For further assistance, technical support, product inquiries, or to register your product, please visit the official Leviton web地点 （Leviton Store) or contact their dedicated customer service department. Have your product model number (25W34) and purchase information ready when contacting support.
