マニュアル+

System Sensor RTS151KEY

System Sensor RTS151KEY Remote Test and Reset Station with Key

Model: RTS151KEY

1.製品オーバーview

The System Sensor RTS151KEY is a remote test and reset station designed for use with compatible duct smoke detectors. This device allows for convenient testing and resetting of the associated smoke detector from a remote location, eliminating the need to access the detector directly within the ductwork. It features a key-operated switch for secure operation.

System Sensor RTS151KEY Remote Test and Reset Station with Key

図1.1: 前面 view of the System Sensor RTS151KEY Remote Test and Reset Station, showing the keyhole, reset, and test labels.

2. 重要な安全情報

警告：

  • Installation and wiring must be performed by qualified personnel in accordance with all local codes and authorities having jurisdiction.
  • このデバイスの修理または設置を行う前に、電源を切ってください。
  • This device is part of a fire alarm system. Proper functioning is critical for life safety. Do not modify or tampデバイスを使用します。
  • Ensure all connections are secure and correct as per the wiring diagrams.
  • Do not paint this fire alarm device.

3. パッケージ内容

パッケージを開封したら、すべてのアイテムが揃っていて損傷がないことを確認してください。

  • System Sensor RTS151KEY Remote Test and Reset Station
  • Keys (typically two)
  • Installation and Wiring Instructions (manual)
Two keys for the RTS151KEY remote station

Figure 3.1: Included keys for operating the RTS151KEY station.

Instruction manual with wiring diagrams for System Sensor RTS151KEY

図3.2：例ample of the included installation and wiring instructions.

4.設置と配線

The RTS151KEY is designed for surface mounting. Ensure the mounting location is easily accessible for testing and resetting, and is within the specified wiring distance from the associated duct smoke detector.

4.1 取り付け

  1. Select a suitable mounting location, typically near the duct smoke detector or in a control room.
  2. Secure the backplate of the RTS151KEY to the wall or surface using appropriate screws.
  3. Ensure the device is mounted securely and level.

4.2配線

Refer to the wiring diagram provided with your specific duct smoke detector and the RTS151KEY manual for precise connections. The RTS151KEY typically connects to the detector's remote test/reset terminals and power terminals.

戻る view of System Sensor RTS151KEY showing wiring terminals and labels

図4.1：背面 view of the RTS151KEY, showing terminal block connections for wiring.

  • Connect the power supply (DC ONLY) to the designated terminals.
  • Connect the remote test/reset wires from the duct smoke detector to the corresponding terminals on the RTS151KEY.
  • Ensure all wiring connections are tight and properly insulated.
  • After wiring, attach the front cover of the RTS151KEY to the mounted backplate.

5. 操作手順

The RTS151KEY provides remote testing and resetting capabilities for compatible duct smoke detectors.

5.1 Testing the Duct Smoke Detector

  1. Insert the key into the keyhole on the RTS151KEY.
  2. キーを回して テスト position. This will activate the test function of the connected duct smoke detector.
  3. Observe the alarm indicator on the RTS151KEY (if present) and/or the main fire alarm control panel for confirmation of the alarm.
  4. Once the test is complete, return the key to the center (normal) position and remove it.

5.2 Resetting the Duct Smoke Detector

  1. After an alarm condition or a test, the duct smoke detector may need to be reset.
  2. Insert the key into the keyhole on the RTS151KEY.
  3. キーを回して リセット position. This will initiate a reset sequence for the connected duct smoke detector.
  4. Hold the key in the RESET position for a few seconds, then return it to the center (normal) position and remove it.
  5. Confirm that the alarm condition has cleared on the main fire alarm control panel.

6. メンテナンス

The RTS151KEY is a low-maintenance device. Regular maintenance should focus on ensuring its physical integrity and proper function within the fire alarm system.

  • 目視検査: Periodically inspect the unit for any signs of physical damage, loose connections, or environmental degradation.
  • 機能テスト: Perform routine functional tests as required by local fire codes and the manufacturer's recommendations for the associated duct smoke detector. This typically involves using the test function of the RTS151KEY.
  • クリーニング： If necessary, gently wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7。 トラブルシューティング

If the RTS151KEY or the connected duct smoke detector is not functioning as expected, consider the following common issues:

問題考えられる原因解決
Duct detector does not test/reset from RTS151KEY.
  • 配線が正しくありません。
  • No power to the duct detector or RTS151KEY.
  • Faulty duct detector.
  • Key not fully turned or held.
  • Verify all wiring connections against the manual's diagram.
  • Check power supply to both devices.
  • Test the duct detector directly if possible.
  • Ensure the key is turned firmly to the TEST/RESET position and held briefly.
No indication on RTS151KEY during alarm/test.
  • LED indicator failure.
  • Wiring issue to indicator.
  • Confirm detector status at the main control panel.
  • Check wiring to the indicator terminals.

If problems persist, contact a qualified fire alarm technician or System Sensor technical support.

8. 製品仕様

特徴詳細
モデル番号RTS151KEY
寸法（高さ×幅×奥行き）4 x 7 x 4インチ（約）
アイテム重量3.84オンス
電源DCのみ
欧州連合783863038075
メーカーシステムセンサー
互換性Designed for use with compatible System Sensor duct smoke detectors.

9. 保証とサポート

For warranty information, please refer to the documentation provided with your purchase or contact System Sensor directly. System Sensor products are typically covered by a limited warranty against defects in materials and workmanship.

テクニカルサポート

For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact System Sensor customer support. Contact information can usually be found on the manufacturer's official webサイトまたは製品のパッケージ内。

System Sensor Official Webサイト： www.systemsensor.com