SINGER Foot Controller and Power Cord Instruction Manual

1.製品オーバーview

This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.

1.1. 主な特徴

• Integrated foot controller and power cord.
• Genuine SINGER replacement part.

1.2. Compatible SINGER Sewing Machine Models

This foot controller and power cord is compatible with the following SINGER sewing machine models:

• シンガー1105
• シンガー1116
• シンガー1120
• シンガー1130
• シンガー118
• シンガー1525
• シンガー1725
• シンガー1748
• シンガー2639
• シンガー2662
• シンガー2712
• シンガー2722
• シンガー2732
• シンガー2718
• シンガー2724
• シンガー2730
• Singer 3116 Simple
• シンガー3709
• シンガー3722
• シンガー3810
• シンガー3820
• シンガー3825
• シンガー3962
• シンガー4102
• Singer 4205 Inspiration
• Singer 4206 Inspiration
• Singer 4210 Inspiration
• Singer 4212 Inspiration
• Singer 4220 Inspiration
• Singer 4228 Inspiration
• シンガー6510
• シンガー6550
• シンガー7312
• シンガー7322
• シンガー7350
• Singer 14T98DS

2. セットアップ手順

Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.

2.1. Connecting the Foot Controller to the Sewing Machine

1. Identify the Connector Port: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
2. コネクタの位置を合わせます。 Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
3. コネクタを挿入します。 Gently push the connector firmly into the port until it is fully seated. Do not force the connection.

Image: Three-pin connector for the sewing machine input.

Image: Connector dimensions for proper fit.

2.2. 電源コンセントへの接続

1. Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
2. コンセントに差し込む: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).

Image: Power plug with voltag仕様。

Image: Complete foot controller and power cord assembly.

Image: SINGER Foot Controller and Power Cord.

3. 操作手順

Once the foot controller is properly connected, you can begin operating your sewing machine.

3.1. Controlling Sewing Speed

1. Turn On Machine: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
2. 圧力をかける: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
3. 速度を上げる: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
4. 縫うのをやめる: Release pressure from the pedal to stop the machine.

4. お手入れとメンテナンス

Proper care ensures the longevity and reliable performance of your foot controller.

• クリーニング： Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
• ストレージ： When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
• 検査： Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.

5。 トラブルシューティング

If you encounter issues with your foot controller, refer to the following common problems and solutions.

5.1. Sewing Machine Does Not Power On

• 接続を確認してください: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
• 電源の確認: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
• Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.

5.2. No Speed Control or Machine Runs at Full Speed

• Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
• 内部の問題: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.

5.3. Intermittent Power or Operation

• コードの損傷: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
• 緩い接続: Re-seat all connections, ensuring they are firm and secure.

6. 製品仕様

7. 保証とサポート

For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER webサイト。

You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.