1. はじめに
The Sennheiser MMD 935-1 is a dynamic cardioid microphone module designed for seamless integration with Sennheiser evolution wireless G3 or 2000 Series SKM handheld transmitters. This module is based on the acclaimed E935 dynamic vocal microphone, offering high sound pressure level handling and effective feedback rejection. Its design ensures uniform on-axis and off-axis response, making it suitable for various vocal applications. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your MMD 935-1 microphone module.
2. 安全情報
Please read these safety instructions carefully before using the MMD 935-1 microphone module. Keep this manual for future reference.
- 環境条件: デバイスを雨、湿気、または極端な温度にさらさないでください。
- クリーニング： Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
- サービス: Refer all servicing to qualified service personnel. Do not attempt to disassemble or repair the module yourself.
- 互換性: Ensure the module is used only with compatible Sennheiser G3 or 2000 Series SKM handheld transmitters as specified.
3. パッケージ内容
パッケージに次のアイテムが含まれていることを確認してください。
- Sennheiser MMD 935-1 Dynamic Cardioid Microphone Module
- 取扱説明書（本書）
4. セットアップとインストール
The MMD 935-1 microphone module is designed for quick and easy installation onto compatible Sennheiser SKM handheld transmitters without the need for special tools.
- 送信機を準備します。 Ensure your Sennheiser G3 or 2000 Series SKM handheld transmitter is powered off before beginning installation.
- Remove Existing Module (if applicable): If a different microphone module is currently attached, gently unscrew it counter-clockwise from the transmitter body until it detaches.
- Attach the MMD 935-1 Module: Align the MMD 935-1 module with the threaded connection point on the transmitter. Carefully screw the module clockwise onto the transmitter body until it is securely fastened. Do not overtighten.
- 接続を確認します: Ensure the module is firmly seated and there is no wobble. The electrical contacts should be fully engaged.
Image showing the Sennheiser MMD 935-1 microphone module, highlighting its black mesh grille and the gold-colored contact points at the base for connection to a wireless transmitter.
5. 操作手順
Once the MMD 935-1 module is installed on your compatible SKM transmitter, follow these general guidelines for optimal performance:
- 電源オン: Power on your SKM handheld transmitter and the associated wireless receiver.
- 周波数同期: Ensure the transmitter and receiver are synchronized to the same frequency channel according to your wireless system's instructions.
- マイクの配置: For vocal applications, hold the microphone approximately 2-6 inches (5-15 cm) from the sound source. The cardioid pickup pattern is most sensitive directly in front of the microphone, minimizing sound from the sides and rear.
- ゲイン調整: Adjust the gain settings on your transmitter and/or mixing console to achieve a strong signal without clipping or distortion. The MMD 935-1 can handle high sound pressure levels.
- フィードバックの防止: 位置stage monitors and loudspeakers to avoid pointing directly at the microphone's front. The module's effective feedback rejection helps, but proper stage monitoring setup is crucial.
6. メンテナンス
Proper care will extend the life and performance of your microphone module.
- グリルの掃除: Periodically wipe the microphone grille with a soft, dry, lint-free cloth. For stubborn residue, a slightly damp cloth (water only) can be used, ensuring no moisture enters the microphone capsule.
- ストレージ： When not in use, store the microphone module in a protective case or bag to prevent dust accumulation and physical damage.
- 衝撃を避ける: Protect the module from drops or impacts, which can damage the internal components.
7。 トラブルシューティング
If you encounter issues with your MMD 935-1 module, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 音が出ない、または出力が低い | Module not securely attached; Transmitter/receiver not powered on; Incorrect gain settings; Frequency mismatch. | Ensure module is tightly screwed on. Check power for transmitter and receiver. Adjust gain levels. Verify transmitter and receiver are on the same frequency. |
| 歪んだ音 | Input gain too high; Damaged module. | Reduce gain on transmitter or mixing console. If distortion persists, the module may require servicing. |
| 過剰なフィードバック | Microphone too close to loudspeakers; High gain settings; Room acoustics. | Reposition microphone and loudspeakers. Reduce gain. Consider using a graphic equalizer to cut problematic frequencies. |
If the problem persists after attempting these solutions, please contact Sennheiser customer support.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 502577 |
| マイクタイプ | 動的 |
| 極性パターン | カーディオイド |
| フォームファクター | Handheld Microphone Module |
| 互換性 | Sennheiser evolution wireless G3 or 2000 Series SKM handheld transmitters |
| オーディオ感度 | 154 Decibels (SPL handling) |
| 信号対ノイズ比 | 25デシベル |
| アイテム重量 | 0.22ポンド（約3.52オンス） |
| 製品寸法（長さ x 幅 x 高さ） | 4 x 3.25 x 2.5インチ |
| メーカー | ゼンハイザー |
9. 保証とサポート
Sennheiser products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your original transmitter purchase or visit the official Sennheiser webサイト。
For technical support, troubleshooting assistance, or service inquiries, please contact Sennheiser customer support through their official website or authorized service centers. Keep your proof of purchase and model number (MMD 935-1, Model 502577) readily available when seeking support.
ゼンハイザー公式 Webサイト： www.sennheiser.com
