導入
This manual provides essential information for the proper use and maintenance of your Dynojet USB 9V Power Adapter. This adapter is specifically designed to supply power to the Dynojet Power Commander III unit, facilitating programming and tuning operations without the need for the Power Commander III to be installed on a motorcycle. It features a USB connection for interfacing with a computer.
安全情報
- Always ensure the adapter and Power Commander III are disconnected from any power source before making or breaking connections.
- Use only a fresh 9V battery or a suitable alternative power source (e.g., 6 AA batteries in a holder providing 9V) to power the adapter. Depleted batteries may lead to unstable operation or data corruption during programming.
- Do not expose the adapter to moisture, extreme temperatures, or corrosive environments.
- アダプタを落としたり、強い衝撃を与えたりしないでください。
- お子様の手の届かない場所に保管してください。
パッケージ内容
パッケージに次のアイテムが含まれていることを確認してください。
- 1 x Dynojet USB 9V Power Adapter
設定
- 電源の準備: Obtain a fresh 9V battery. Alternatively, a battery holder for 6 AA batteries can be used to provide a more stable and longer-lasting 9V power source.
- 接続電源： Attach the 9V battery clip from the adapter to your 9V battery or alternative power source.
- Connect to Power Commander III: Plug the appropriate connector from the adapter into the power input port of your Dynojet Power Commander III unit. Ensure a secure connection.
- コンピュータに接続します: Insert the USB connector of the adapter into an available USB port on your computer.
- ソフトウェアのインストール: Ensure you have the latest Dynojet Power Commander software installed on your computer. If not, download it from the official Dynojet webサイト。
操作手順
Once the adapter is connected to the Power Commander III and your computer, you can proceed with programming:
- ソフトウェアの起動: Open the Dynojet Power Commander software on your computer.
- デバイス認識: The software should automatically detect the connected Power Commander III unit. If not, verify all connections and ensure the 9V battery has sufficient charge.
- Load/Modify Maps: Use the software interface to load new fuel maps, modify existing settings, or perform other tuning adjustments as required.
- バッテリー寿命: Be aware that a standard 9V battery can drain quickly when powering the Power Commander III. It is recommended to work efficiently and have a fresh battery or alternative power source ready to avoid interruptions during critical operations.
- 切断: After completing your programming, safely disconnect the Power Commander III from the software, then disconnect the USB cable from your computer, and finally remove the 9V battery.
メンテナンス
- クリーニング： Wipe the adapter with a soft, dry cloth to remove dust or debris. Do not use liquid cleaners or solvents.
- ストレージ： アダプタは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- バッテリーの取り外し: Always remove the 9V battery from the adapter when not in use for extended periods to prevent battery leakage and damage to the adapter.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Power Commander III does not power on. | Depleted 9V battery; loose connection; faulty adapter. | Replace with a fresh 9V battery; check all connections; test adapter with another Power Commander III if available. |
| Computer does not detect Power Commander III. | Loose USB connection; missing/outdated drivers; Power Commander III not powered. | Ensure USB cable is securely connected; install or update Dynojet drivers; verify Power Commander III is powered by a fresh 9V battery. |
| Programming errors or interruptions. | Low 9V battery power; unstable USB connection. | Use a fresh 9V battery or a 6xAA battery holder; ensure USB cable is not disturbed during programming. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ダイノジェット |
| モデル番号 | 66116002-AZ2 |
| メーカー部品番号 | 66116002 |
| コネクタタイプ | USB |
| 出力巻tage | 9ボルト |
| ワットtage | 36ワット |
| アイテム重量 | 7.2オンス（0.45ポンド） |
| 入力ボリュームtage | 240 Volts (Note: This specification may refer to a generic adapter type or an alternative power input not typically used with the 9V battery setup for this specific product.) |
| 電源 | Corded Electric (Note: While listed, the primary intended power source for the Power Commander III via this adapter is a 9V battery.) |
保証とサポート
Warranty information for the Dynojet USB 9V Power Adapter is not provided in this document. For detailed warranty terms, technical support, or service inquiries, please contact Dynojet Research directly through their official website or customer service channels. Please have your product model number (66116002-AZ2) and purchase information available when contacting support.
