1. はじめに
Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.
Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.
2. 安全情報
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- 設置やメンテナンスを始める前に、必ずメインの回路ブレーカーまたはヒューズ ボックスの電源を切ってください。
- この器具を接地されていない電気システムに接続しないでください。
- 最大ワット数を超えないでくださいtage specified for the bulbs (2 x 100-Watt medium base bulbs).
- 破損を防ぐため、ガラス部品を慎重に取り扱ってください。
- すべての接続が安全かつ適切に絶縁されていることを確認してください。
3. パッケージ内容
Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.
- Fixture Body with Brushed Nickel Finish
- Square Etched Glass Shade
- Mounting Hardware (Crossbar, Screws, Wire Nuts)
- Chain (for hanging installation option)
- Ceiling Mount Canopy (for semi-flush installation option)
- 取扱説明書
4. セットアップとインストール
This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.
4.1.インストール前
- ブレーカーで電源をオフにします。
- Remove existing fixture (if applicable).
- Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).
4.2. Semi-Flush Mount Installation
- Attach the mounting crossbar to the outlet box using the provided screws.
- ワイヤーナットを使用して、器具のアース線を電源アース線に接続します。
- Connect the fixture's white wire to the supply white (neutral) wire.
- Connect the fixture's black wire to the supply black (hot) wire.
- すべてのワイヤをコンセント ボックスに慎重に押し込みます。
- Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
- Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).
図4.1: 詳細な view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.
4.3. Hanging Fixture Installation (with Chain)
- Follow steps 1-5 from the Semi-Flush Mount Installation.
- Determine the desired hanging length and adjust the chain accordingly.
- Thread the fixture's electrical wires through the chain and the canopy.
- Secure the chain to the mounting loop on the crossbar and to the fixture body.
- Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
- Attach the etched glass shade to the fixture body.
Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.
図4.3: クローズアップ view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.
5. 操作手順
Once the fixture is securely installed and wired, you can begin operation.
- 電球を取り付けます: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
- 電力を回復する： メイン回路ブレーカーで電源を再度オンにします。
- ライトをアクティブにする: Use the wall switch connected to the fixture to turn the light on and off.
The etched glass shade provides a softly diffused light, ideal for various indoor settings.
6. メンテナンス
定期的なメンテナンスは、器具の外観と機能性を維持するのに役立ちます。
- クリーニング： To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp 布で拭いた後、乾いた布で拭いてください。
- 電球の交換: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
- 検査： 配線や接続部に摩耗や損傷の兆候がないか定期的に点検してください。問題が見つかった場合は、資格のある電気技師にご相談ください。
7。 トラブルシューティング
If your fixture is not operating correctly, refer to the following common issues and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しない | フィクスチャに電力がありません | ブレーカーまたはヒューズを確認してください。壁のスイッチがオンになっていることを確認してください。 |
| ライトが点灯しない | 配線接続が緩んでいる | Turn off power, check all wire connections. Secure them firmly. |
| ライトが点灯しない | 電球の不良 | 正しいタイプとワットの新しい電球に交換してくださいtage. |
| ちらつく光 | 電球または配線が緩んでいる | Turn off power, tighten bulb. Check wire connections. |
| ハミング音 | 互換性のない調光スイッチ | Ensure dimmer switch is compatible with incandescent bulbs. |
If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.
8. 仕様
Detailed technical specifications for the P3597-09 fixture:
| 属性 | 価値 |
|---|---|
| モデル番号 | P3597-09 |
| 寸法（幅×高さ） | 12-3/4 inches (32.38 cm) x 13-5/8 inches (34.61 cm) |
| 製品寸法（全体） | 33.02 x 33.02 x 35.56 cm |
| アイテム重量 | 2.72 kg (6 ポンド) |
| 材料 | Glass, Metal (Brushed Nickel Finish) |
| 電球タイプ | Incandescent (Medium Base / E26) |
| 電球の数 | 2 |
| 最大ワットtage 電球あたり | 100ワット |
| 巻tage | 120ボルト |
| インストール方法 | Semi Flush Mount / Hanging (Chain Included) |
| スタイル | Mission / Craftsman |
| 色 | ブラッシュドニッケル |
Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.
9. 保証とサポート
Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting webサイト。
メーカー: プログレスライティング
事業所所在地: GREENVILLE, SC, 29607 US
