Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

製品終了view

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

図1: 前面 view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

安全情報

警告： To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• この器具を濡れた場所や暗い場所に取り付けないでください。amp 場所。
• 器具が天井の構造要素にしっかりと取り付けられていることを確認します。
• 指定された電球タイプとワット数のみを使用してくださいtag過熱や損傷を防ぐため。
• 照明器具から可燃物を遠ざけてください。

パッケージ内容

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

仕様

セットアップとインストール

重要： Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. 設置場所を準備します。
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • 取り付け面が清潔で乾燥しており、構造的に健全であることを確認してください。
2. 器具を取り付ける:
   • Carefully remove the fixture from its packaging.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. 電気接続:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • すべてのワイヤをコンセント ボックスに慎重に押し込みます。
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. 電力を回復する：
   • 回路ブレーカーまたはヒューズボックスで電源を再びオンにします。
   • 器具が正しく動作するかテストします。

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

操作手順

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. オン/オフ:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

メンテナンス

定期的なメンテナンスにより、照明器具の最適なパフォーマンスと寿命が確保されます。

• クリーニング：
  • 清掃する前に、回路ブレーカーで器具の電源がオフになっていることを確認してください。
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp 布。
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • 電源を復旧する前に器具が完全に乾くまでお待ちください。
• 電球の交換:
  • 回路ブレーカーで器具の電源をオフにします。
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp 保有者。
  • Replace the acrylic diffuser.
  • 電源を復旧し、器具をテストします。

トラブルシューティング

照明器具に問題が発生した場合は、次の一般的な問題と解決策を参照してください。

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

保証とサポート

保証： The Progress Lighting P7206-30EB fixture comes with a 1年間の限定保証 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.

カスタマーサポート: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting web最新の連絡先情報については、サイトをご覧ください。

保証のために購入証明として購入レシートを保管してください。