InFocus IN1102 ウルトラモバイルワイドスクリーン DLP プロジェクター ユーザーマニュアル

導入

This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.

The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.

箱の中身

Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:

• InFocus IN1102 プロジェクター
• 電源コード
• Navigator II Remote
• USB (A to mini-B) Cable
• VGAケーブル
• キャリーケース

製品終了view

Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.

図1: 前面 View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.

図2: 前面 View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.

Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.

Figure 4: Top Panel and Control Keypad. この画像はトップダウンの view of the projector, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.

図5: 角度付き View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.

設定

1. 配置: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
2. 電源接続: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
3. ソースの接続:
   • DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
   • VGA： Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
   • ビデオ入力： For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
4. 電源オン: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
5. フォーカス調整： 投影された画像が鮮明になるまで、プロジェクター レンズのフォーカス リングを回転させます。

操作手順

Powering On/Off (LiteSwitch™)

The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.

Using the LiteTouch™ Keypad

The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:

• 電源ボタン: プロジェクターの電源をオンまたはオフにします。
• 自動画像: Automatically optimizes the image settings for the current input source.
• キーストーン： Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
• メニュー： 詳細設定を行うためのオンスクリーン ディスプレイ (OSD) メニューにアクセスします。
• 選択: OSD メニュー内での選択を確定します。
• 音量： 音声出力レベルを調整します。
• ソース： Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).

DisplayLink™ Connectivity

When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.

Image Orientation for Mounting

The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.

メンテナンス

プロジェクターの清掃

• 外観： 柔らかく糸くずの出ない布で軽く拭き取ってください。ampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. 刺激の強い化学薬品は避けてください。
• レンズ： Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.

フィルターフリー設計

The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.

トラブルシューティング

プロジェクターで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

• 画像が表示されない:
  • プロジェクターの電源がオンになっていることを確認し、amp 点灯します。
  • Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
  • Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
  • Check your computer's display settings to ensure the external display is enabled or duplicated.
• 画像がぼやけています:
  • プロジェクターレンズのフォーカスリングを調整します。
  • 投影面が平らであり、プロジェクターが適切な距離にあることを確認します。
• Image is Trapezoidal (Wider at Top/Bottom):
  • Use the "Keystone" adjustment on the control panel to correct the image shape.
  • Ideally, position the projector perpendicular to the screen to minimize keystone correction.
• 音声なし:
  • Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
  • プロジェクターのコントロールまたはリモコンを使用して音量を調整します。
  • ソースデバイスのオーディオ出力設定を確認してください。

For further assistance, please refer to the InFocus support webサイトをご覧いただくか、カスタマーサービスにお問い合わせください。

仕様

Key technical specifications for the InFocus IN1102 projector:

保証とサポート

The InFocus IN1102 projector comes with the following limited warranty:

• 部品： 5年
• 労働： 2年
• Lamp: 6ヶ月

For warranty claims, technical support, or additional product information, please visit the official InFocus webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証の有効性を確認するため、購入証明書としてレシートを保管してください。