Jung UAE8UPOK6 ネットワークコンセントインサート 取扱説明書

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of the Jung UAE8UPOK6 Network Outlet Insert. This product is designed to provide a reliable network connection point within your electrical system. Please read this manual thoroughly before proceeding with installation or use.

2. 安全情報

WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician or a person with appropriate electrical knowledge and experience.

• Always disconnect power at the main circuit breaker before installing or servicing electrical devices.
• 設置中は、すべての地域および国の電気規則に従っていることを確認してください。
• 濡れた場所や湿気の多い場所に設置しないでくださいamp 場所。
• Verify correct wiring connections to prevent damage to the device or connected equipment.
• 取り付けには適切なツールを使用してください。

3. パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

• Jung UAE8UPOK6 Network Outlet Insert (1 unit)

不足品や破損品がある場合は、すぐにサプライヤーにご連絡ください。

4. セットアップとインストール

The Jung UAE8UPOK6 Network Outlet Insert is designed for screw-in installation into a standard electrical wall box. Follow these steps for proper installation:

1. 電源切断: Before beginning, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
2. 配線の準備: Carefully strip the outer jacket of your network cable (e.g., Cat5e, Cat6) to expose the individual twisted pairs. Do not strip the insulation from the individual wires.
3. ワイヤーを接続する: Refer to the color codes marked on the insert's terminals. The insert supports standard network wiring configurations. Insert each individual wire into its corresponding terminal according to the desired wiring standard (e.g., T568A or T568B). The image below illustrates the terminal layout and color markings. Secure the wires firmly.
4. Mount the Insert: Place the network outlet insert into the wall box. Use the provided screws to secure the insert firmly to the wall box.
5. Install Faceplate (Optional): If using a decorative faceplate (sold separately), attach it according to its specific instructions.
6. 電力を回復する： インストールが完了し、すべての接続が安全になったら、メイン回路ブレーカーで電源を復元します。

Figure 1: Jung UAE8UPOK6 Network Outlet Insert. This image displays the Jung UAE8UPOK6 network outlet insert. It features an RJ45 port in the center for network cable connection. Around the port, there are clearly marked terminals with color codes (e.g., Bl/Br, Or/Gr) for precise wiring according to network standards. The insert is designed for screw-in installation into a standard electrical box.

5. 操作手順

Once the Jung UAE8UPOK6 Network Outlet Insert is correctly installed and power is restored, it functions as a standard network connection point.

1. ネットワークケーブルを接続します: Insert a standard RJ45 network cable from your device (e.g., computer, printer, smart TV) into the RJ45 port on the front of the installed insert.
2. 接続を確認します: Ensure the cable clicks securely into place. Most network devices will indicate a successful connection with an LED light on the device or the network card.

6. メンテナンス

The Jung UAE8UPOK6 Network Outlet Insert requires minimal maintenance.

• クリーニング： To clean the surface, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the plastic or internal components.
• 検査： Periodically inspect the insert for any signs of physical damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7。 トラブルシューティング

If you experience issues with your network connection through the Jung UAE8UPOK6 Network Outlet Insert, consider the following:

• ネットワーク接続なし:
  • Ensure the network cable is securely plugged into both the device and the outlet insert.
  • Verify that the other end of the network cable (connected to your router/switch) is also secure and functional.
  • Check the network cable for any visible damage. Try a different cable if available.
  • Confirm that the network equipment (router, switch) is powered on and functioning correctly.
  • If you suspect a wiring issue, disconnect power and have a qualified electrician inspect the internal connections of the insert.
• ネットワーク速度が遅い:
  • Ensure you are using appropriate network cables (e.g., Cat5e or Cat6 for higher speeds).
  • Check your network equipment and internet service provider for potential bottlenecks.

8. 仕様

9. 保証とサポート

For information regarding warranty coverage and technical support for your Jung UAE8UPOK6 Network Outlet Insert, please refer to the documentation provided with your purchase or visit the official Jung webカスタマーサービスの連絡先は通常、メーカーのウェブサイトに掲載されています。 webサイト。