1. はじめに
This manual provides essential instructions for the safe and efficient assembly, setup, and maintenance of your Sealey SM3002ST Lathe Stand. This stand is designed to provide stable support for Sealey metalworking lathes and mill/drills, specifically models SM3002, SM2502, and SM2503. Please read this manual thoroughly before assembly and use, and retain it for future reference.
2. 安全に関する注意事項
人身傷害や機器の損傷を防ぐために、常に次の安全上の注意事項を守ってください。
- すべての指示を読む： Familiarize yourself with the stand's components and assembly steps before beginning.
- 安定した表面： Ensure the stand is assembled and placed on a level, stable, and non-slip surface capable of supporting the combined weight of the stand and the machine mounted on it.
- 適切な組み立て: Assemble the stand strictly according to the instructions provided. Do not modify the stand in any way.
- 安全な取り付け: Always ensure the lathe or mill/drill is securely fastened to the stand using appropriate hardware.
- 重量容量: Do not exceed the recommended weight capacity of the stand. Refer to the specifications section.
- 作業エリアをクリア: Keep the area around the stand clear of obstructions and debris.
- 子供と傍観者: 作業エリアに子供や許可されていない人を近づけないでください。
3. パッケージ内容
Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact your supplier immediately.
- Sealey SM3002ST Lathe Stand components (legs, cross-members, sliding tool shelf, hardware)
Image 3.1: Sealey SM3002ST Lathe Stand
組み立てられた view of the Sealey SM3002ST Lathe Stand, showing its robust construction and design.
4. 組み立て
Follow these steps to assemble your Sealey SM3002ST Lathe Stand.
4.1.必要なツール
- モンキレンチまたはソケットセット
- Screwdriver (if applicable for shelf attachment)
4.2. 組み立て手順
- Identify all components: legs, cross-members, sliding tool shelf, and all fasteners (bolts, nuts, washers).
- Attach the lower cross-members to the legs. Ensure all bolts are finger-tight at this stage.
- Attach the upper cross-members to the legs. Again, keep bolts finger-tight.
- Once all structural components are in place, carefully stand the frame upright.
- Diagonally tighten all bolts securely. Do not overtighten.
- Install the sliding tool shelf onto its designated runners or brackets. Ensure it slides smoothly.
- Verify that the stand is stable and all connections are secure before proceeding to setup.
5. セットアップ
Proper placement and securing of your machine are crucial for safe operation.
5.1. Stand Placement
- Choose a location with adequate space around the stand for safe operation of the lathe or mill/drill.
- Ensure the floor is level and capable of supporting the total weight.
- If necessary, use shims to level the stand.
5.2. Attaching the Lathe/Mill/Drill
- Carefully lift your Sealey SM3002, SM2502, or SM2503 machine onto the top surface of the stand. It is recommended to have assistance for this step due to the weight of the machines.
- Align the mounting holes on the machine with the corresponding holes on the stand's top plate.
- Secure the machine to the stand using appropriate bolts, washers, and nuts (not supplied with the stand, typically provided with the machine). Ensure all fasteners are tightened securely to prevent movement during operation.
6.運用
The SM3002ST stand provides a stable base and convenient storage for your metalworking machine.
6.1. Sliding Tool Shelf
- The integrated sliding tool shelf offers convenient storage for tools, accessories, and small parts within easy reach during operation.
- Ensure that items placed on the shelf do not interfere with the operation of the machine or create a hazard.
- 棚に過度の荷物を載せないでください。
7. メンテナンス
Regular maintenance will ensure the longevity and safe operation of your stand.
- クリーニング： Wipe down the stand regularly with a clean, damp 布で埃やゴミを拭き取ってください。研磨剤入りの洗剤は使用しないでください。
- 検査： Periodically check all bolts and fasteners for tightness. Retighten as necessary.
- 安定性チェック: Ensure the stand remains stable and level. Adjust shims if required.
- ダメージ： Inspect the stand for any signs of damage, such as bent components or cracks. If damage is found, discontinue use and replace affected parts or the entire stand if necessary.
8。 トラブルシューティング
This section addresses common issues you might encounter with the stand.
- スタンドウォブルズ：
- Check if the stand is on a level surface. Use shims if needed.
- すべての組み立てボルトがしっかりと締められていることを確認してください。
- Machine Not Secure:
- Verify that the machine's mounting bolts are correctly installed and fully tightened.
- Ensure the machine is compatible with the stand (SM3002, SM2502, SM2503).
- Sliding Shelf Sticking:
- Clean the shelf runners to remove any debris or dust.
- Apply a small amount of dry lubricant if necessary.
9. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | SM3002ST |
| 互換性 | Sealey SM3002, SM2502, SM2503 Lathes/Mill/Drills |
| 全体のサイズ（W x D x H） | 800 x 355 x 880 mm（約31.5 x 14 x 34.6インチ） |
| アイテム重量 | 4.41 lbs (2 kg approx.) |
| 含まれるコンポーネント | Lathe Stand (assembly required) |
10. 保証とサポート
This Sealey product comes with a 1-year guarantee. For specific terms and conditions, please refer to the official Sealey warranty documentation or contact Sealey customer support.
Image 10.1: Sealey 1 Year Guarantee
The Sealey brand logo accompanied by a '1 Year Guarantee' badge, indicating the product's warranty period.
For technical support, spare parts, or warranty claims, please contact your authorized Sealey dealer or visit the official Sealey webサイト。
