DigiTech XDV DigiVerb Digital Reverb Pedal User Manual

1. はじめに

The DigiTech XDV DigiVerb Digital Reverb Pedal provides a selection of seven distinct reverb types for musical instruments. This pedal is designed to add spatial effects to your sound, ranging from subtle room ambiance to expansive hall and spring reverbs. It features controls for adjusting the reverb level, tone (EQ), and decay time, allowing for precise sound shaping.

2. コントロールと接続

Familiarize yourself with the controls and connection points on the DigiVerb pedal:

画像: 上 view of the DigiTech XDV DigiVerb pedal, showing the four control knobs (Level, EQ, Decay, Type), input/output jacks, and footswitch area. The reverb types are labeled below the 'Type' knob.

• レベルノブ: Adjusts the overall output level of the reverb effect. Turning it clockwise increases the reverb signal volume.
• EQノブ: Controls the tone or equalization of the reverb. This allows you to brighten or darken the reverb sound.
• DECAYノブ: Determines the length or duration of the reverb tail. Clockwise rotation increases the decay time.
• タイプノブ: Selects one of the seven available reverb algorithms:
  1. 部屋： Simulates the acoustics of a small to medium-sized room.
  2. プレート： Emulates the sound of a classic plate reverb unit, often used for vocals and drums.
  3. ホール： Creates the expansive, long-decaying sound of a large concert hall.
  4. CHURCH: Offers a very large and resonant reverb, similar to a church or cathedral.
  5. GATED: A reverb effect that cuts off abruptly, often used for percussive sounds.
  6. 逆行する： Produces a reverse reverb effect, where the reverb swells in before the dry signal.
  7. 春： Mimics the sound of a mechanical spring reverb unit, common in guitar amplifiers。
• ジャック： 1/4-inch mono input for connecting your instrument or the output of another effect pedal.
• OUT 1 (MONO) Jack: 1/4-inch output for mono signal connection to an amplifier or the next pedal in the chain.
• OUT 2 Jack: 1/4-inch output for stereo operation. Use both OUT 1 and OUT 2 for a stereo signal.
• フットスイッチ: Engages or bypasses the reverb effect.

3. セットアップ

Follow these steps to connect your DigiVerb pedal:

1. 電源接続: Insert a 9V battery (if not already installed) or connect a compatible 9V DC power adapter (sold separately) to the power input jack. The pedal requires 50 milliamps.
2. 入力接続: Connect your instrument (e.g., guitar) or the output of a preceding effect pedal to the IN 標準の 1/4 インチ楽器ケーブルを使用してジャックに接続します。
3. Output Connection (Mono): モノラルで操作する場合は、 OUT 1（MONO） あなたのジャックに amplifier's input or the input of the next effect pedal in your signal chain using a 1/4-inch instrument cable.
4. Output Connection (Stereo): For stereo operation, connect the OUT 1（MONO） jack to the left input of a stereo amplifier or mixer, and the アウト 2 jack to the right input using two separate 1/4-inch instrument cables.
5. 初期設定： Before powering on, set the LEVEL, EQ, and DECAY knobs to their mid-point (12 o'clock position) and select a TYPE to begin.

4. 操作

Once connected, operate the DigiVerb pedal as follows:

• 効果を活用する: Press the footswitch to activate the reverb effect. The LED indicator will illuminate when the effect is active. Press it again to bypass the effect.
• リバーブタイプの選択: 回転する タイプ knob to choose from the seven available reverb algorithms. Experiment with each type to understand its unique character.
• Adjusting Reverb Level: 使用 レベル knob to blend the reverb effect with your dry signal. A higher setting increases the prominence of the reverb.
• Shaping the Tone: 調整する EQ knob to tailor the frequency response of the reverb. Turn it clockwise for brighter reverb or counter-clockwise for a darker, warmer sound.
• Controlling Decay: の 減衰 knob controls how long the reverb effect sustains. Shorter decay times are suitable for subtle ambiance, while longer times create more dramatic, spacious effects.
• 実験: The interaction between the EQ, Decay, and Level knobs, combined with the different reverb types, allows for a wide range of sonic possibilities. Spend time experimenting to find your desired sounds.

5. メンテナンス

To ensure the longevity and optimal performance of your DigiTech DigiVerb pedal:

• クリーニング： ペダルの外側を拭く際は、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤は使用しないでください。
• ストレージ： ペダルを使用しないときは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリー交換: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. Disconnect the input cable when not in use to conserve battery life.
• 接続: すべてのケーブル接続部が摩耗していないか定期的に点検してください。ジャックにほこりやゴミが付着していないことを確認してください。

6。 トラブルシューティング

If you encounter issues with your DigiVerb pedal, refer to the following common solutions:

• 音が出ない/音が弱い:
  • Check all cable connections. Ensure cables are fully inserted and not damaged.
  • Verify the power supply. If using a battery, check its charge or replace it. If using an adapter, ensure it is the correct voltage (9V DC) and polarity, and that the outlet is functional.
  • 楽器の音量と ampライターのボリュームが上げられます。
  • Test the pedal in bypass mode to confirm the dry signal passes through.
• 過度のノイズ/ハム音:
  • Ensure all cables are shielded instrument cables.
  • Try a different power supply or a fresh battery.
  • 干渉を引き起こす可能性のある他の電子機器からペダルを離してください。
  • Check for ground loops if multiple pedals are used with a shared power supply.
• 効果が得られない:
  • Check power supply. The LED should illuminate when the effect is active.
  • フットスイッチが正しく機能していることを確認します。

7. 仕様

8. 保証とサポート

For information regarding warranty coverage, technical support, or service, please refer to the documentation included with your purchase or visit the official DigiTech webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。