1. はじめに
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bogen C100 Classic 100-Watt Amplifier. Please read this manual thoroughly before operating the unit to ensure proper usage and to maximize its performance and longevity.
画像1.1：正面 view of the Bogen C100 Classic 100-Watt Amplifier, showing input controls, tone controls, power switch, and Bogen branding.
2. 重要な安全情報
Observe all warnings on the product and in the operating instructions. Retain these instructions for future reference.
- 電源: Connect the unit only to a 120 Volt AC, 60 Hz power source.
- 換気： Ensure adequate ventilation. Do not block ventilation openings. Overheating can cause malfunction.
- 水分： ユニットを雨や湿気にさらさないでください。
- サービス: すべてのメンテナンスは資格を持ったサービス担当者にお任せください。本製品をご自身でメンテナンスすることは絶対におやめください。
- カリフォルニア州提案65の警告: この製品には、カリフォルニア州でがんや先天性欠損症、その他の生殖障害を引き起こすことが知られている化学物質が含まれています。
3. セットアップとインストール
3.1 開梱
慎重に取り外します amplifier from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Report any damage to your dealer immediately.
3.2 配置
を配置 amplifier on a stable, flat surface. Ensure there is sufficient space around the unit for proper airflow to prevent overheating. The unit is designed for surface mounting.
3.3 接続
接続する前に、 amplifier is powered off and unplugged from the electrical outlet.
- 入力ソース： Connect your audio sources (e.g., mixing board, microphone) to the appropriate input jacks on the rear panel. Refer to the rear panel diagram (not provided in current data, but implied for a manual) for specific input types and locations.
- スピーカー出力： スピーカーをに接続します amplifier's output terminals. Ensure correct polarity (+ to + and - to -) for all speaker connections. This amplifier is suitable for 70V transformer-isolated balanced speakers.
- 電源接続: Once all audio connections are secure, plug the amplifier's power cord into a grounded 120V AC, 60Hz electrical outlet.
4. 操作手順
4.1 電源のオン/オフ
Locate the red power switch on the front panel. Press the switch to the 'ON' position to power on the amplifier. The switch will illuminate when the unit is powered on. Press it again to power off.
4.2 入力レベルの調整
The front panel features individual input level controls. Rotate these knobs clockwise to increase the volume for the corresponding input, and counter-clockwise to decrease it. Adjust these controls to achieve a balanced sound level from all connected sources.
4.3 トーンコントロール
の amplifier includes BASS and TREBLE tone controls. Adjust these to fine-tune the audio output to your preference or room acoustics.
- ベース： Controls the low-frequency response. Turn clockwise for more bass, counter-clockwise for less.
- 高音： Controls the high-frequency response. Turn clockwise for more treble, counter-clockwise for less.
4.4 マスターボリューム
マスターボリュームコントロールは、全体の出力レベルを調整します。 amplifier. Start with the master volume at a low setting and gradually increase it to the desired listening level. Avoid setting the volume too high, which can cause distortion or damage to speakers.
5. メンテナンス
5.1 クリーニング
掃除するには amplifier, first unplug it from the power outlet. Use a soft, dry cloth to wipe down the exterior surfaces. Do not use liquid cleaners or aerosol sprays, as these can damage the finish or internal components.
5.2換気
Regularly check that the ventilation slots on the top and sides of the unit are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.
5.3 ストレージ
保管する場合は、 amplifier for an extended period, ensure it is powered off, unplugged, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
6。 トラブルシューティング
If you experience issues with your Bogen C100 amp問題がある場合は、テクニカル サポートに連絡する前に次の表を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電源なし | Power cord unplugged; Power outlet not active; Blown fuse | Ensure power cord is securely plugged in; Test outlet with another device; Check and replace fuse if necessary (refer to service manual or qualified technician). |
| 音声出力なし | Input source not connected; Speaker wires loose or incorrect polarity; Input/Master volume too low; Mute function active (if applicable) | Verify input source connections; Check all speaker wire connections and polarity; Increase input and master volume levels; Ensure no mute function is engaged. |
| 歪んだ音 | Input level too high; Master volume too high; Incorrect speaker impedance; Damaged speaker | Reduce input level or master volume; Ensure speakers match amplifier impedance requirements; Test with different speakers if possible. |
| ユニットが過熱してシャットダウンする | Blocked ventilation; Excessive load on ampリファイアー | Ensure ventilation slots are clear; Reduce output volume or number of connected speakers. If problem persists, contact service. |
7. 仕様
- モデル： C100
- 出力: 100ワット
- 巻tage: 120ボルト
- ワットtage: 220 watts (Power Consumption)
- 商品の重量: 19ポンド
- 製品寸法（長さ x 幅 x 高さ）： 14.5 x 11 x 3.75インチ
- 取り付けタイプ: 表面実装
- メーカー: ボーゲン
- 国際コード: 765368330090
- 安全基準: CSAリスト
8. 保証とサポート
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Bogen website. The buybox winner mentions a "1 year vendor warranty against defect."
For additional assistance, you may contact Bogen customer service directly. Contact details are typically available on the manufacturer's webサイト。
