導入
The X-10 Powerhouse POWERMID Receiver Model RE549 is designed to extend the range of your infrared (IR) remote controls, allowing you to operate audio/video equipment located in a separate room or behind closed cabinet doors. This system eliminates the need for direct line-of-sight between your remote control and the equipment, providing convenience and flexibility in your home entertainment setup.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your POWERMID Receiver.
パッケージ内容
パッケージの内容をチェックして、すべてのアイテムが揃っていることを確認してください。
- X-10 Powerhouse POWERMID Receiver (Model RE549)
- X-10 Powerhouse POWERMID Transmitter (often sold separately or as part of a kit, but essential for full functionality)
- AC電源アダプター
- ユーザーマニュアル（このドキュメント）
Note: The POWERMID system typically consists of a receiver and a transmitter unit. This manual focuses on the receiver, but both are required for operation.
設定
1. 配置に関する考慮事項
- レシーバーの配置: Position the POWERMID Receiver in the room where your audio/video equipment is located. Ensure the front of the receiver, which contains the IR output, has a clear line-of-sight to the IR sensor of the equipment you wish to control.
- 送信機の配置: Place the POWERMID Transmitter in the room where you will be using your remote control. It should be positioned so that your remote control has a clear line-of-sight to the transmitter's IR input.
- 障害物を避けてください: Ensure there are no physical obstructions between the receiver and your equipment's IR sensors, or between your remote and the transmitter's IR input.
- 電源: Both units require a standard AC power outlet.
2. 受信機の接続
- Connect the provided AC power adapter to the POWERMID Receiver's power input jack.
- AC電源アダプタを標準の壁のコンセントに差し込みます。
- Position the receiver so its IR output window faces the IR sensor of your audio/video component(s). For multiple components, ensure the receiver can "see" all of them.
3. 送信機の接続
- Connect the provided AC power adapter to the POWERMID Transmitter's power input jack.
- AC電源アダプタを標準の壁のコンセントに差し込みます。
- Position the transmitter in the room where you will be using your remote control, ensuring your remote has a clear path to the transmitter's IR input window.
操作手順
Once both the POWERMID Receiver and Transmitter are powered on and correctly positioned, operation is straightforward:
- Point your existing IR remote control at the POWERMID Transmitter.
- Press the desired button on your remote control (e.g., volume up, channel change, power on/off).
- The transmitter will capture the IR signal and send it wirelessly to the POWERMID Receiver.
- The receiver will then re-transmit the IR signal to your audio/video equipment, just as if your remote control were in the same room.
重要な考慮事項:
- 範囲： The effective range between the transmitter and receiver can vary depending on environmental factors and obstructions.
- Line-of-Sight (Internal): While the system works through walls, the internal IR signals (remote to transmitter, receiver to equipment) still require line-of-sight.
- 干渉： Avoid placing units near strong electromagnetic fields or other IR devices that might cause interference.
メンテナンス
The X-10 Powerhouse POWERMID Receiver requires minimal maintenance to ensure optimal performance.
- クリーニング： Use a soft, dry cloth to clean the exterior surfaces of the receiver and transmitter. Do not use liquid cleaners or abrasive materials.
- 換気： Ensure that the units are placed in well-ventilated areas and that their vents are not obstructed.
- 力： Disconnect power during electrical storms or when the unit will be unused for extended periods.
トラブルシューティング
If you experience issues with your POWERMID Receiver, refer to the following common problems and solutions:
| 問題 | 考えられる原因 / 解決策 |
|---|---|
| Remote control signals are not reaching equipment. |
|
| Intermittent or unreliable control. |
|
| 電源インジケータライトが点灯しません。 |
|
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | RE549 |
| ブランド | X10 |
| 接続技術 | 赤外線（IR） |
| 対応デバイス | Devices controllable by standard IR remote controls (e.g., TVs, VCRs, cable boxes, satellite receivers, stereo systems) |
| 制御方法 | リモート |
| 電源 | AC電源アダプター（付属） |
| アイテム重量 | 9.6オンス（約） |
| パッケージ寸法 | 6.1×5.3×4インチ（約） |
保証とサポート
Specific warranty information for the X-10 Powerhouse POWERMID Receiver Model RE549 is not provided in this document. Please refer to the original product packaging or the manufacturer's official web詳細な保証条件については、サイトをご覧ください。
For technical support or further assistance, please visit the X10 official support channels or contact their customer service department. Keep your purchase receipt and model number handy when seeking support.
