Intermatic ML88T 88ワットパワーパック（タイマーおよびアースシールド付き）取扱説明書

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic ML88T 88-Watt Power Pack with Timer and Ground Shield. This unit is designed to power 12-volt low voltage outdoor landscape lighting systems, offering automatic on/off functionality with a programmable timer and a manual override switch. Please read these instructions thoroughly before use to ensure safe and efficient operation.

2. 重要な安全情報

WARNING: RISK OF FIRE OR ELECTRIC SHOCK. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.

• This power pack is designed for 屋外での使用のみ.
• Mount the unit more than 3 inches (10 feet) from the inside wall of a swimming pool, spa, or hot tub.
• Do not use this product with submersible luminaries or pumps.
• Do not connect to other power supplies in parallel.
• 調光器と一緒に使用しないでください。
• すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
• Use only solid and stranded type wire rated under one screw terminal.
• 総ワットtage of connected lighting must NOT EXCEED 88 WATTS.
• This unit features surge-resistant construction and is double insulated for safety.
• インストール、メンテナンス、トラブルシューティングを実行する前に、必ず電源を切ってください。

3. セットアップとインストール

3.1 Mounting the Power Pack

Select a suitable outdoor location for mounting the power pack. The location should be protected from direct heavy rain if possible, and adhere to the safety guidelines regarding proximity to water bodies.

• Mount the unit securely to a wall or post using appropriate hardware (not included).
• Ensure the unit is mounted vertically with the cord facing downwards to prevent water ingress.

3.2配線接続

The ML88T features screw terminals for connecting your low voltag風景照明システム。

画像1: 後方 view of the ML88T Power Pack, highlighting the wiring terminals and important safety labels. The power cord exits from the bottom, and the low voltage output terminals are visible at the base.

1. Ensure the power pack is unplugged from the main power supply.
2. Open the terminal cover at the bottom of the unit.
3. 低電圧を接続するtage wires from your landscape lighting system to the screw terminals. Use solid or stranded type wire.
4. Strip approximately 1/2 inch of insulation from the wire ends before inserting them into the terminals.
5. Tighten the screws firmly to ensure a secure connection.
6. Close the terminal cover.
7. Plug the power pack into a grounded outdoor electrical outlet.

4. 操作手順

The ML88T features a mechanical timer for automatic operation and a manual ON/OFF override switch.

画像2: フロント view of the ML88T Power Pack, displaying the mechanical timer dial with 24-hour markings and the manual ON/OFF override switch located above the dial.

4.1 現在の時刻の設定

1. Rotate the inner dial clockwise until the current time aligns with the 'TIME' arrow indicator. The dial is marked for 24 hours (12 AM to 12 PM).

4.2 タイマーのプログラミング

The timer uses small, removable trippers to set the ON and OFF times. Two sets of trippers are included.

1. Insert the 'ON' tripper (typically red or a distinct color) into the desired ON time slot on the outer edge of the dial.
2. Insert the 'OFF' tripper (typically black or a distinct color) into the desired OFF time slot.
3. Ensure the trippers are securely seated in the dial. The timer will activate and deactivate the lighting system according to these settings.

4.3 手動オン/オフオーバーライド

A manual ON/OFF switch is located above the timer dial. This switch allows you to override the programmed timer settings.

• To turn the lights ON manually, push the switch to the 'ON' position.
• To turn the lights OFF manually, push the switch to the 'OFF' position.
• To return to programmed timer operation, set the switch to the 'TIMER' position (usually the center position).

5. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your power pack.

• クリーニング： 定期的にユニットの外側を拭いてくださいamp cloth to remove dirt and debris. Do not use abrasive cleaners or immerse the unit in water.
• 接続チェック: Annually inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or safety hazards.
• 環境チェック: Ensure the unit remains free from obstructions and is not exposed to excessive moisture or extreme temperatures beyond its operating range.

6。 トラブルシューティング

6.1 ライトが点灯しない

• 電力を確認します: Ensure the power pack is securely plugged into a working electrical outlet.
• 手動オーバーライド: Verify the manual ON/OFF switch is in the 'TIMER' or 'ON' position.
• タイマー設定: Confirm the current time is set correctly and the ON tripper is in the desired position.
• 配線： 低ボリュームを検査するtage wiring connections at the power pack and to the lights for any loose or corroded wires.
• 電球: Check if the landscape light bulbs are functional.
• オーバーロード: 総ワット数を確認するtage of connected lights does not exceed 88 watts. An overload can trip internal protection.

6.2 Timer Not Functioning

• 力： ユニットに電源が供給されていることを確認します。
• トリッパー: Ensure the ON and OFF trippers are correctly inserted and positioned on the dial.
• 手動オーバーライド: Make sure the manual switch is in the 'TIMER' position.

6.3 Buzzing Sound

A slight humming or buzzing sound from the transformer is normal during operation. However, if the buzzing is excessively loud or accompanied by other issues (e.g., lights flickering, unit overheating), disconnect power immediately and contact customer support.

7. 仕様

8. 保証とサポート

8.1 保証情報

The Intermatic ML88T Power Pack is covered by a 5年間保証 ご購入日から1年間有効です。本保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

8.2 カスタマーサポート

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic web最新の連絡先情報については、サイトまたは製品パッケージをご覧ください。