カプレッソ560.01

Capresso Infinity Conical Burr Grinder Model 560.01 User Manual

モデル: 560.01

導入

The Capresso Infinity Conical Burr Grinder Model 560.01 is designed to provide precise and consistent coffee grinding for various brewing methods. Its commercial-grade solid steel conical burrs ensure optimal flavor and aroma preservation by minimizing heat buildup during grinding. This manual provides essential information for the safe and efficient operation, maintenance, and care of your grinder.

重要な安全対策

電気製品を使用するときは、火災、感電、人への傷害のリスクを軽減するために、次のような基本的な安全上の注意事項に常に従う必要があります。

製品構成

Familiarize yourself with the main components of your Capresso Infinity Conical Burr Grinder.

Capresso Infinity Conical Burr Grinder with bean hopper and ground coffee container

図 1: 全体 view of the Capresso Infinity Conical Burr Grinder, showing the main unit, bean hopper, and ground coffee container.

Close-up of the Capresso Infinity grinder's control panel with grind settings and timer dial

Figure 2: Close-up of the control panel, highlighting the grind fineness settings (Extra Fine, Fine, Medium, Coarse) and the timer dial.

Coffee beans visible inside the clear bean hopper of the Capresso Infinity grinder

Figure 3: The transparent bean hopper filled with whole coffee beans, ready for grinding.

Ground coffee collected in the clear container of the Capresso Infinity grinder

Figure 4: The ground coffee container, showing freshly ground coffee collected after operation.

Close-up of the commercial-grade solid steel conical burrs, separated from the grinder

Figure 5: The precision-engineered conical burrs, responsible for uniform grinding.

設定

  1. すべてのコンポーネントを開梱し、梱包材を取り除きます。
  2. グラインダーを安定した平らで乾燥した場所に置きます。
  3. Ensure the ground coffee container is securely inserted into its slot at the front of the grinder.
  4. Place the bean hopper onto the top of the grinder, aligning the black dot on the hopper with the desired grind setting (Extra Fine, Fine, Medium, Coarse) on the grinder base. Twist the hopper clockwise until it locks into place.
  5. 電源コードを120VのACコンセントに差し込みます。

操作手順

コーヒー豆を挽くには、次の手順に従ってください。

  1. 豆ホッパーに豆を入れる: Remove the lid from the bean hopper and pour whole coffee beans into it. The hopper has an 8.8-ounce capacity. Replace the lid securely.
  2. 挽き具合を選択: Rotate the bean hopper to align the black dot with your desired grind setting. The grinder offers 16 settings, categorized as Extra Fine, Fine, Medium, and Coarse.
    • エクストラファイン: トルココーヒーに最適です。
    • 罰金: Suitable for espresso machines.
    • 中くらい: Recommended for drip coffee makers.
    • 粗い: フレンチプレスやパーコレーターに最適です。
  3. 粉砕時間の設定: Turn the timer dial located on the front of the grinder to select the desired grinding duration, from 5 to 60 seconds. The grinder will automatically stop once the set time has elapsed.
  4. 研磨開始: The grinder will begin operation once the timer is set and the hopper is correctly positioned.
  5. 挽いたコーヒーを集める: Once grinding is complete, carefully remove the ground coffee container from the front of the grinder.

Video 1: This video demonstrates the key features and basic operation of the Capresso Infinity Conical Burr Grinder, including filling the hopper, selecting grind settings, and collecting ground coffee.

ビデオ2: このビデオでは、view of the Capresso Infinity coffee grinder, showcasing its ease of use, grind settings, and the process of grinding coffee beans.

メンテナンスと清掃

定期的に清掃することで、最適なパフォーマンスが確保され、グラインダーの寿命が延びます。

  1. グラインダーのプラグを抜きます。 清掃する前に、必ずアプライアンスを電源コンセントから抜いてください。
  2. 豆ホッパーを削除します。 Rotate the bean hopper counter-clockwise to align the black dot with the "unlock" symbol, then lift it off.
  3. 上部バリの除去: The upper burr is removable for easy cleaning. Lift it out of the grinding chamber.
    A hand removing the upper conical burr from the Capresso Infinity grinder for cleaning

    Figure 6: Removing the upper burr for thorough cleaning of the grinding mechanism.

  4. Clean Burrs and Chamber: Use the included cleaning brush to remove any residual coffee grounds from both the upper and lower burrs, as well as the grinding chamber.
  5. きれいな挽いたコーヒーの容器: Empty and wash the ground coffee container with warm, soapy water. Ensure it is completely dry before reinserting.
  6. 外側を拭く: グラインダーの外側を洗剤で拭きますamp 布で拭いてください。本体を水に浸さないでください。
  7. 組み立て直す: Place the cleaned upper burr back into the grinding chamber, then reattach the bean hopper by aligning the black dot and twisting clockwise to lock.

トラブルシューティング

問題考えられる原因解決
グラインダーが始動しません。Power cord not plugged in; bean hopper not correctly locked; timer not set.Ensure power cord is securely plugged in. Verify the bean hopper is locked into position. Set the timer dial to a desired grinding duration.
一貫性のないグラインド。刃が汚れているか磨耗している、または豆の種類に対してグラインド設定が適切ではない。Clean the burrs and grinding chamber thoroughly. Adjust the grind setting to a finer or coarser option as needed for your coffee beans and brewing method.
挽いたコーヒーに静電気が過剰に発生する。Dry air conditions; natural static buildup during grinding.This is a common issue with coffee grinders. Try lightly misting the coffee beans with water before grinding to reduce static. Alternatively, allow the ground coffee to sit in the container for a few minutes before emptying.
Grinder jams.Foreign object in beans; excessive amount of beans; burrs clogged.Unplug the grinder. Remove the bean hopper and upper burr. Inspect for and remove any foreign objects. Clean the burrs and grinding chamber. Do not overfill the hopper.

仕様

保証とサポート

The Capresso Infinity Conical Burr Grinder Model 560.01 comes with a one-year limited warranty. For detailed warranty information, product support, or to purchase replacement parts, please visit the official Capresso web公式サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

さらに詳しいサポートが必要な場合は、 AmazonのCapressoストア.

関連文書 - 560.01

前view Capresso Infinity Plus コニカルバーグラインダー:ユーザーマニュアルと取扱説明書
Capresso Infinity Plus コニカルバーグラインダー(モデル番号570および575)の詳細な取扱説明書、安全ガイドライン、お手入れのヒント、保証情報をご紹介します。コーヒーを完璧に挽く方法を学びましょう。
前view Capresso Infinity Burr Grinder: User Manual for Models #560 & #565
This user manual provides essential safety instructions, operating guidelines, cleaning procedures, and warranty information for the Capresso Infinity Burr Grinder, models #560 and #565.
前view Capresso Infinity コニカルバーグラインダー ユーザーマニュアルと取扱説明書
Capresso Infinity コニカル バー グラインダー (モデル #560、#565) の包括的なユーザー マニュアルと操作手順。安全上の注意事項、セットアップ、研磨設定、クリーニング、保証情報が詳しく説明されています。
前view Capresso Grind Select コーヒーグラインダー - モデル 597.04 - 取扱説明書と保証書
Capresso Grind Select コーヒー バー グラインダー (モデル 597.04) の総合ガイド。重要な安全対策、操作手順、クリーニング、トラブルシューティング、保証情報などを網羅しています。
前view Capresso ステンレススチール製バーグラインダー(モデル 580 および 585) - ユーザーマニュアルと保証書
Capresso 580 および 585 ステンレススチール バーグラインダーのユーザー マニュアルと保証情報。セットアップ、操作、クリーニング、および安全ガイドラインを網羅しています。
前view Capresso Infinity Burr Grinder 限定保証
Capresso Infinity Burr Grinder (モデル番号 #560 および #565) の米国における 1 年間の限定保証の詳細。材料および製造上の欠陥をカバーし、除外事項と制限事項を概説します。